"Unknown device" constantly detected

Similar Questions

• need drivers for 2 unknown devices under windows 8.1

  Hello

  I have the HP dv5-1017nr laptop and have recently upgraded to 8.1 windows x 64 OS. In Device Manager, 2 unknown devices are detected with ACPI\HPQ0004\2 & DABA3FF & 1 & ACPI\ENE0100\4 & 34E33D79 & 0. Windows could not find the drivers for them, and I don't know what hardware on my laptop, to which they refer.

  Could you suggest some appropriate for them for windows 8.1 x 64 drivers? Thanks in advance.

  Hello:

  You need these drivers...

  ACPI\HPQ0004:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3688870&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125640_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI\ENE0100: The W7 driver should work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66701-1&cc=us&DLC=en&LC=en&OS=4063&product=3763423&sw_lang=

• Windows 7 detects the Logitech Digital Precision PC Gaming Headset as unknown device.

  I've been using headset Logitech Digital Precision PC Gaming Headset PC for a long time, and all of a sudden today my pc with OS Win7 detects the headphones as unknown device. To be more precise, the helmet can be pluged with usb. any solution to this issue?

  Original title: unknown device

  Hi Dave,.

  I suggest you to uninstall and reinstall the Logitech Digital Precision PC Gaming Headset driver; This could help you in the matter of fixing.

  I suggest also, please contact device support team.

  http://forums.Logitech.com/

  You can also refer to:

  What to do when a device is not installed correctly. http://Windows.Microsoft.com/en-US/Windows7/What-to-do-When-a-Device-isn ' t-installed-correctly

  I hope this helps.

• Samsung Galaxy - device not detected. ERRO - unknown device

  Original title: Samsung Galaxy - device not detected

  I have a samsung Galaxy ace and my pc does not detect. He said that the controlprogram is not installed and I can't install it, my pc says its and unknown device...

  Hello

  1 have had any changes made on the computer before the show?

  2 have you installed the software for the Samsung Galaxy Ace?

  3. the device was working fine on the computer as soon as possible?

  4. are you face any problem with the installation of the program Samsung?

  Method 1:

  I suggest you to refer to article and install the software on the computer and check if it helps.

  http://www.Samsung.com/hk_en/consumer/mobile/mobile-phones/Smartphone/gt-S5830OKATGY/index.idx?PAGETYPE=prd_detail&tab=support

  Method 2:

  Check the link and see if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Unknown devices in device Windows 7 Manager - dv7-2170us

  I have a laptop dv7-2170us.

  I did a clean install with Windows 7 Home Premium 64-bit.

  I used the drivers for this model of laptop on HP's site.

  I get a few unknown devices in Device Manager.

  I tried to uninstall the device and re - install to allow Windows to re - detect but no drivers are found.  See the pictures below, what devices could they maybe refer to?

  I have all the necessary drivers load that I know and I installed a driver who looked valid on the site of HP drivers.

  

  

  EDIT: Everything works!  Thanks for the tip of Daniel.  I googled how to identify the ID of material and is here with this site http://www.pcidatabase.com/ , punch in the device id and bam, it IS the card reader.  Weird because it worked perfectly.  But I downloaded the driver even re-installed and this solved the problem.

  =============================================

  I tried the Intel Chipset utility, did not work. However, here is the hardware id:

  

  

  

  If you look closely, you will notice that each of these devices are in fact different.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Tecra 9100: No sound and unknown device

  I have the laptop above and have recently flattened and reinstalled Windows XP pro. I have no sound, I have a speaker in my sys tray, Device Manager detects the card Intel (r) 82801 CA/Cam AC'97 Audio Controller, after I installed the RealTek AC 97 drivers. I plugged in the headphones to make sure that this is not not the speakers who have blown. But still no sound. All volumes are turned upward and the volume on the front wheel is set in the middle. In sounds and audio in the Control Panel, all volumes are increasing and the speakers are set to portable stereo speakers.

  Any ideas?

  I have a unknown devices in Device Manager States location is a system compatible ACPI Microsoft from what I see on Google it's something to do with the battery. Once again any ideas?

  Thank you

  I know that your laptop. It s a Tecra 9100 and this laptop supports a Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible sound card.

  The problem is the XP SP1 or SP2. The audio driver of Yamaha does not support SP1.
  Seems that you need to update the audio driver.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24622

  and

  This Toshiba solution site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

• unknown device missing after installing windows driver 8

  I recently installed windows 8 pro to my pc and installed all the drivers but in my device manager it is now a yellow mark on the unknown device.

  Location- on PCI Express Root Complex

  Details of hardware-

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  Hi TheRaven2099. First try the driver for your computer page and click on the button "Scan now" at the top left.
  
  
  
  HP Pavilion dv7-1240us laptop support:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & LC = in & Product = 3860622
  
  
  
  
  
  If that does not detect it, this reference may be for that.
  
  HP ProtectSmart hard drive protection:
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & softwareitem = ob-109953-1
  
  
  
  Let me know.

• Satellite A500 USB problem - unknown device.

  Hello

  Have a Satellite A500 I recently restored to factory from the recovery partition and reinstalled my Win7 upgrade.

  I have a couple of unknown devices in Device Manager and have no way of knowing what they are.
  They would normally be a problem for me except that I'm also the sounds of disconnecting USB every now and then and caveats relating to the devices being plugged into a port USB2 not high speed.

  I have of course plugged anything in time so I expect there is a device which is malfunctioning and not detected correctly.

  The devices I first suspected (webcam, TV Tuner, touchpad) all normally appear in Device Manager so I'm at a loss as to what is the cause.

  Any ideas?
  Beards

  Hello

  I understand this correctly?

  You restored the A500 to the factory settings using the Toshiba recovery procedure and the unknown devices still shows up in the Device Manager?

  That s strange because the recovery disk to put the laptop in the same State as on the first day of purchase. So generally unknown devices should not appear and all drivers must be installed correctly.

  However, I found an interesting and in my eyes useful HowTo document that should help you to know which drivers are missing in your case.

  + How to identify an unknown device (e.g. LAN wireless module)? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

• I get message "USB device not recognized", but two USB devices are actually works very well. Poster sometimes Device Manager 'unknown device', then it will disappear and reappear.

  Poster sometimes Device Manager 'unknown device', then it will disappear and reappear with the error message.  Sometimes, I see the message even when there is nothing in the USB port.

  Hi malsnano,

  I see that usb devices do not work on xp. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to these usb devices?

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  M odes 2:

  Put the computer in a clean boot state, then check if that helps.

  How to solve the problem by performing a clean boot state:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in step 3: to reset the computer as usual.

  Method 3.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  You can disconnect all USB devices and then perform the following steps:

  1. click on start and then click Control Panel.
  2. click on system and Maintenance, click System, and then click Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
  4. Repeat step 2 to uninstall all items under 'USB Bus controllers'.
  Then, restart the computer and Windows XP will automatically reinstall all USB controllers.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Windows XP SP3 USB errors / unknown devices with Plug and Play

  I have problems with USB flash drives and other plug-and-play devices detected by windows. After taking all possible measures to correct this problem (e.g. windows update, chip / update of the bios, update driver, driver and media ultilites reinstall, uninstall and allow windows update after restarting, removal of hidden devices and even remote tech support from Dell) whenever I connect a flash drive or use all plug-and-play devices it is detected as an unknown device and I can not put updated pilot any port I use. Hardware problems were excluded dute to recognition of the device and USB keyboard and USB mouse are functioning properly. Also these same plug-and-play devices worked well on other items of work. After Googling my eyeballs, I gave up and need help please. The only thing I can do now is to reinstall the operating system that really, really, I don't want to do.

  UPDATE *.

  Dell has replaced the motherboard and the problem was solved. Thanks to all here who offered advice and patience.

• "Unknown device" in my device manager - but the system ready to use?

  Hi everyone, it's me again.

  I have just bought (and already exchanged for a second) a device that I want to install on my desktop. This is a Hiyatek Multi multi-function which is mainly for media card reader options provided. There is also a USB 2.0 port, fan controller, taken mic and speaker jack ports as well as the different media slots. The device is supported by Win XP

  I have the same problem persisted with this device (which I connected to the only place where I can find for the USB cables) which shows as "Unknown device" in my equipment manager. The statement indicates that Microsoft software should automatically detect the device and install the drivers for me however, the bubbles of pop-up information "Found New hardware" followed by "Unknown device" followed of "your device installed and ready to use" HUH! How can it make sense please...

  Peripheral installation mini disk that came with the camera auto works when it is inserted, but this process is stopped because the device was not recognized.

  On the motherboard to point plugin, I did reference has been used to connect my 2 front mounted USB 1.0 ports (which have now been removed) and the connector for that was a plug of white pine of 10 or 12. The new tracks to the device, I am trying to install are 4pin sheets I've located in the same orientation as the big white connector. There are some images here...

  http://i812.Photobucket.com/albums/zz48/Vanguard_01/HiyatekUSBcables2.PNG

  http://i812.Photobucket.com/albums/zz48/Vanguard_01/HiyatekUSBcables1.PNG

  http://i812.Photobucket.com/albums/zz48/Vanguard_01/Managerdisplay.PNG

  As a result, the only things that work on the new Panel are the speed controller and the speaker port.

  Also today I installed a PCI card with USB 2.0 with 3 other additional ports on the front of my machine but there is no extra connection on the card (for these 2 4 sheets, I mentioned earlier), which appear to be installed correctly from the 3rd link image above.

  I need to know if I connect it correctly or do I need to get some software from somewhere.

  Thank you

  Vanguard_1

  The answer was there in front of me!

  I got a response from Hiyatek who pointed out that cable sequence was not the same on the new sheets for my device even if they had stipulated it also on the box that it was compatible with USB 1.0 to the motherboard connections. The Green and white wires were knocked down in fact (this can be seen in the pictures). I now spliced the old Plug and the wires on the wiring of new device and it works.

  I was however not aware that there are differences in the wiring of the plug between the connections USB - is - this current?

  Vanguard_1

• HP officejet 6500 installed but a printing software unknown device... no driver installed?

  used cd to install printer hp 6500 office jet series. everything is supposed to be there. does not recognize the device. device manager unknown device States, no driver installed. using the usb connection. I tried 2 different cords and do not proceed with the connection. the drivers downloaded from the hp Web site and still no go. spent 45 minutes with hp today and I think I know more than them! Help, please. Windows xp (x 86) all updates are underway.

  Hello Sosocompliterate,

  Thank you for your message.  This computer connects to your printer via the USB port?  If Yes, are you able to use other USB devices on your computer?  You can try to change the output port the printer is connected to exclude a possible bad USB port on your computer.  Otherwise, if USB is detected on your computer and that you can't always not to recognize the printer, the result is most likely a bad cable or a defective printer.
  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown device: Code 28 (PCI)

  I upgraded my Dell Dimension 4500 XP to Vista. I have no sound. My sound card is detected, but there is an unknown device which is a PCI device. After trying to install the driver, he said: "windows found a software for your device but encountered an error trying to install it. It also determines that the unknown device is a creative game Port. What should I do?

  Hello

  You are out of luck with this Dell 4500 Desktop, unless the provided dell drivers XP Audio/Sound always functioned in Vista.

  Never provided by Dell Vista Audio/Sound Drivers for this model.

  http://www.Dell.com/support/drivers/us/en/04/product/dimension-4500

  When you select an OS for the Dimension 4500 at this link of Dell, the drivers stop to XP.

  I suggest that you buy your own its Vista Compatible card and install.

  If you already have your own card its installed, go to the sound card manufacturer's Web site and find, download and install Vista drivers for it, if they are available.

  If no driver Vista are available, read the previous tips...

  See you soon.