Update April 30 = problems in Vista

Similar Questions

• Problems with Vista for the bases of x 64 systems (KB2753842) updated

  After the Vista (KB2753842) to update my sidebar and the task bar bottom turned white.  They were clearly before the update.
  I rolled back the update and the return to a light background.
  The next time I turned on the computer, auto update installed (KB2753842) and the white background returned.
  Then I disabled the update of the automatic system and uninstalled the update (KB2753842).
  The taskbar and sidebar are back to normal. (clear)
  Is there another way to solve this problem?

  PA bear,

  I have successfully completed the list, except article 11 c. For good measure, clear your Java cache by http://www.java.com/en/download/help/plugin_cache.xml I was unable to search and find the Java Control Panel by the link above.

  The KB2753842 is listed in the list of installed updates and my problem with the white background in the sidebar bar and the stain was gone!

  Of Kudo and thanks a lot for your advice and help.

  I now intend to start the automatic update of the window.

• Windows Vista update (April 1, 2011) now the computer will not boot.

  1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

  Hi Ema1976,

  Do you have an error message when you try to start?

  Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

   

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Automatic update because of problems with the USB ports.

  After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.

  This must be a different problem from what I had so...

  In any case, I uninstalled all updates on vista (as opposed to other programs, office, outlook, etc.) and then reinstalled again and everything works fine now... go figure: /.

• Problems installing Vista SP2

  OK, since the release of SP2 ive tried to install the Windows Vista Edition SP2 Home Premium x 86.

  Ive tried: [all this unsuccessfully]:

  -Installation in safe mode

  -Installation after removing my anti virus program.

  -Installation after you change ownership of all the contents of the C: drive to my account.

  -Install the standalone version, all languages

  -Install the standalone version, 5 languages

  - And things more...

  Some notes on my system important:

  -Its a preinstalled Windows Vista Home Premium [do not know if it came with SP1] install on my laptop: Acer Aspire 7730 G-644G100MN.

  -As it was an English version of Windows Vista, when I arrived [which is weird, because I live in the Netherlands] I changed the language in Dutch using Vistalizator, the only program out there that allows you to change the language of your windows installation.

  -Windows Vista installs each update without any problems except for the SP2... I get the error message is: 0x800F0823

  -Some time ago I discovered something very strange in my laptop: the owner of the contents of the C: drive has not been saved to the Group administrators, but something else [he could not find the owner, something like that]. So I changed the property to my account [which caused some viruses to wake up, somewhat, but those that have been cleaned in place], which enabled me to access my program of all the files in the folders [which I couldn't do before, and that was the main reason I changed ownership: I was not able to run or install programs] really weird stuff]

  However today still sometimes the change of property to the non-administrateurs, which is really weird... And annoying, for example, yesterday I installed the game blur, but I wasn't able to run it because I was not allowed access to the game files, even if im an administrator!

  So I changed the owners once again, and then everything worked fine.

  -In addition, before I changed the property, I did a sfc/scannow, who found errors, but has not been able to correct.

  I guess that's about it.

  Please help me solve this problem!

  Kalaar,
  What you can try to do is to uninstall the pack of Vistalizator program\language.  Then run SFC again and if it can solve the problems, then try to reinstall SP2.  If SFC finds problems and can't always fix them after the Elimination of this program, then you need to reinstall Windows.  You can perform upgrade inplace or a clean install, and all updates, including SP2.  Thislink gives information on performing an inplace upgrade.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update KB976002 connection problems

  Hello

  Update KB976002 itself automatically installed this morning and since then, my internet connection does not work. Under my network connections it says the cable is disconnected and no diagnosis actually recognize that the cable is connected.
  There is no problem with the hub or the cable itself I can plug in the cable to other devices and they connect very well.

  I did a restore system before the update was installed but it does not uninstall the update and the problem persists.
  Also for playback on this patch of the window that is supposed to pop up asking if I want to change browsers or anything that ever appeared after several reboots my system and the actual broswerchoice.exe is not responding if you try and run
  Among other things, I reinstalled my network card drivers and it also made no difference
  I'm running Vista Ultimate

  This happened once before, after an update, but, unlike this problem, he somehow set himself after that my computer has been restarted several times

  Thank you

  Problem solved, apparently. He just decided to work again. Strange...

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Intermittent service problems. Vista Home Premium

  From automatic updates of Vista back in February/March 2009, when restart the program stalled and went into a research problem and repair mode. There was no found repairs and 'Restore' did does not solve the problem. Stopping continuously with the power button, I could finally turn it back on. Since then I had hit similar and finally re-installed the Vista operating system, twice and downloaded all updates, but the problem persists. This has happened after an automatic upgrade Vista this morning.
  Someone at - it had similar problems and were able to find a Solutione (why Cap accented E appear when I press the question mark is Buttone)
  Thanks in advance for answers
  Rancher8

  You may have some corrupted files or a virus. You have you scanned computer viruses? I suggest that you try to create a new profile to test the problem. There is a repair option it's just called a Inplace upgrade. http://support.Microsoft.com/kb/927523

  Corrupted profile test

  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Windows Update KB890830, keeps trying to update on both my XP & Vista, computer time and again.

  Windows Update KB890830, continues to try to update on both my XP & Vista, again and again since the middle of last month, the computer how to stop?

  Hi MThomas3353,
   
  -A that this update has been successfully installed on your computer?
   
  Try the methods listed in the section below and check if the problem is resolved.
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Audio problems with Vista

  audio is present, volume is set to 100 for maximum audibility, but it is still extremely low despite the update of drivers. At the same time (actually quite frequently) audio turns off by itself and I don't have infections or corrupted files. Any recommendations? I use a sigmatel high definition audio CODEC device. Help, please. Thank you

  Hello

  Please contact the Microsoft Community.

  I would have you look at the article-

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-Vista

  Let us know if you need assitance.

• updated from XP SP3 to Vista Home premium. cannot add a printer error 0x000006be

  ORIGINAL TITLE: just upgraded to XP SP3, Vista home premium. Windows Installer fails, local print spooler fails. I need help, please.

  1. installation of some results of updates and things of the driver ' a network error has occurred trying to read the file:

  C:\Users\Owner\Desktop\SystemRequirementsLab_Intel_4.5.13.0.msi ".
  2. when I try to "add a printer" for my HP Deskjet 2512 get this: "Windows can't open add printer." The local spooler service is not
  running. Please restart the spooler or restart the machine. »
  3. also I get "Windows can't open add printer." Impossible operation completed (error 0x000006be)»
  Can someone give answers right in front, and if I need to use the command prompt to resolve, be thorough in the entries, I need to do.

  Hi Chris,

  1, the System Requirements Lab software is used to check a system configuration to see if some games have compatible hardware.

  For more information, refer to http://www.intel.com/support/siufaq.htm

  You can always reinstall this software and drivers required.

  No. 2 and 3 seems to be specific to the printer drivers not working not properly.

  You can follow these methods to check whether the problem is resolved.

  Method 1:

  Step 2: Update Windows.

  As you have just upgraded to Vista, there may be some Windows updates pending. Please refer to this article and install updates.

  http://Windows.Microsoft.com/en-in/Windows-Vista/install-Windows-updates

  Step 2: Update printer drivers.

  You can visit the system manufacturers Web site and download and install the latest drivers for Windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5231933&

  For reference. http://Windows.Microsoft.com/en-in/Windows-Vista/find-and-install-printer-drivers

  Method 2: Restart the spooler service.

  Check out the link and run the troubleshooter that will attempt to restart the spooler service.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab3&v4h=winxptab1

  Let us know the results of the above steps, and we will be happy to help you.

• Update Manager - Installshield problem ' an error has occurred. Error code # 5'

  original title: Update Manager - Installshield problem

  I'm having a problem with the Update Manager.  An error code is always popping up "an error has occurred.  No. 5 error code.  It then returns me a website www.consumer.installshield.com for more information.  I can't figure out how to stop this.  Any suggestions?

  Hi Lindieonlyme,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) when exactly you get this error message? When you perform a specific activity or even when the computer is idle?

  Method 1: Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: You can see the steps outlined in the article below, which addresses the issue of InstallShield

  InstallShield error messages

  http://support.Microsoft.com/kb/910816

  (Article apply to Microsoft games, steps applies to the issue at hand)

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updated level InPlace or repair Vista installation

  I have various problems with Vista that I think started after installing IE8. I restored it to the oldest restore point, I had & got rid of IE8, but not all of my problems. I guess I have corrupted files. I ran scan disk & system file checker. I had problems with SP1 does not install year last & Microsoft had me do a upgrade inplace & got everthing goes again. When I try that now I get the error that installation is more recent that I am trying to install. I've gathered having SP1 SP2 & installed causes this. Microsoft has an installation disc I can get which has updates on it or I have to uninstall and start from there. I've read about vlite, but I think it is a bit much for me to 1 install. Thanks for any help.  Ron

  Microsoft does not provide you with the Vista DVD updated.

  You have a problem with Service Pack level.

  Read the info below:

  Looking for a difference in numbers/Service Pack levels.

  If Service Packs came pre-installed on the operating system, there is no way to uninstall them.
  You will need to exchange the disc for a later version that includes the missing Service Pack.

  On your installed operating system Service Pack level cannot be greater than what is on the disk repair facility upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have install.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install installation upgrade repair > reinstall SP2.

  And run the repair installation upgrade of a family race Premium.

  See you soon.

  Mick Murphy - Microsoft partner