Update of the STA100-2 Z30 Z30 BlackBerry blackBerry sagna

My Z30 has 10.3.1.1784 version and OS 10.3.1.2582.

When I look at the new updates at this link

US.BlackBerry.com/Software/smartphones/Update/blackberry10-OS.html

The site displays this message:

carloganesh wrote:

My Z30 is unlocked and still I did not put any leak update

I can't you how you got what you... all I can do is give you observations based on the information that you disclose here.

carloganesh wrote:

in fact I wanted to put the 10.3.2, version, but I'm afraid.

What are you afraid of?

The most important is that you be 100% sure that you know your credentials BBID... they are required to let you know that you must enter if you want to clean and put in place a different BBID. If the device wipes without substitute being entered, you will need to enter the same credentials BBID you reboot after the WIPE. This is part of the anti-theft functions that are now. I have all 3 of my devices on 10.3.2. now and actually it a little... in fact, I was not able to use my Z10 as a driver every day since about 10.2.2 and with 10.3.2 now I can still use it as my daily driver. So, for me, there are significant improvements in the 10.3.2 branch.

Also important is the fact that once you go to 10.3.2, you cannot go back to 10.3.1 or an earlier version. As part of the implementation of the function of protection against theft, had to block falling back as older versions do not include this function, and the existence of this function is required by some Governments and laws. Thus blocking the ability to retreat was also necessary to comply.

carloganesh wrote:
If I put a version of the leak and in the future, should launch a new update. I get the OTA Download in my Z30 or I have to always update versions leaks?

If you install a leak, which has no effect on future offerings. Normally, if you install a leak beyond what has approved your carrier (or one who is controlling your situation), then you will not receive any offer is until what they homologuent something beyond what you run. Same as if you were official.

In addition, be aware that not all things there are leaks. There are automatic Chargers created from the production code, as a way to succeed where to fail the official methods. For those who are not technically leaks... just practice tools created by users of smart and published for the benefit of third parties, but actually inspires exit of production code.

carloganesh wrote:

And I have a doubt on the version to download

My fone is Radio or "complete".

In this link have both, but I don't know what to download

Radio or full? If I decide to download...

Drive.bitcasa.com/Send/6tMMpRBzkQkxY_8w1sxMeaelgWiKjL3dTocYhTwQn6io#/EdsjV1utSlOWF-PATB15pg/

I always use Complete. The use of files only Radio is for people who want to install a hybrid OS, using the OS version and the Radio of another kernel. I recommend that stick you with only the files 'Complete '.

The resource is the one I use, btw, and most of what it contains are actually just Autoloaders of released real production code, not necessarily 'leaks' by themselves. True 'leaks' are OS versions coming out before their release of BB for carriers... once a version is published by BB for carriers, it is is more considered a "leak", even if it's source by ADF.

Good luck!

Tags: BlackBerry Smartphones

Similar Questions

  • Update of the Smartphones 9720 O2 UK blackBerry group 2994 not in DTM?

    Hi all

    I have a 9720 with OS 7.1.0.1083 (Platform 9.105.0.18) bundle 2910.

    Under software updates icon, it tells me there is an update available, bundle 2994, for O2 customers (which I am) to improve the battery life (which is currently only about one day max with a very light use).

    When I try to update on the phone, he fails to download always and said to do on DTM.

    The problem is that when I try to update on DTM, he says there is no update available

    The phone itself knows nothing, and I know online nerd 2994 search really is the last BONE of O2 for the 9720.

    And I really need so he can improve the lives of the shocking battery (Yes was a new battery sealed with the phone closed.

    Someone tell why his watch not the update on NCDS, and how can I get it?

    Thank you very much

    Well unfortunately no advice or support has been next-, but I solved it, so stick to the benefit of others having this problem

    Many thanks to overthedge on Blackberryos for the info it stuck, to the origin of John Clark of Blackberry forums, who saved the day!

    Following my post above, with links to downloads of OS for your carrier, they fail to speak of 2 main things to their instructions, and it is to delete the vendor.xml file.

    > The steps are NORMALLY:
    1. download and install Desktop Manager (if you do not - if make sure that it is done (closed) before the next step).
    2. download and install the OS of your choice for your device. (see my ealrier posts for links to downloads of operator OS BB).
    3. delete vendor.xml located in c:\program files\common research in motion\apploader.
    4. plug in the BB and open the Desktop Manager.

    Step 3 is basic - I found this file in the Programsx86 folder, if (running 64-bit win7), "programs" folder - check them both.

    BUT the problem is: >... When you open the Desktop Manager, you get no prompt to update, you're supposed to. When you open the Application Loader your new operating system is not listed!

    That's exactly what I faced, as stated in my previous post, it was not right there, no update is available, even if I had just downloaded - exactly the same thing that happened at the beginning (until I find the download page of the OS from my operator even).

    > The problem is the new automatic Office Manager ' Check for Updates '. This feature uses your internet connection to search for OS updates for your device from your carrier. When it loads a second virtual vendor.xml file in the temporary folder on your computer.
    > So, even after you remove the normal which is installed with the operating system and Office Manager, auto "check for updates" charge one another based on the brand of the device you've got plugged into the PC.

    Therefore, the two delete Vendor.xml.

    In addition to the location of the file in step 3 above, I found my temp as below, as well as a ghost of bit 0 provider/xml file:
    >: \Users\\AppData\Roaming\Research Motion\BlackBerry\Loader XML

    Delete the file vendor.xml here and in the common folder (step 3). DTM for not having the updates auto value (for this process)
    Then when I restarted the DTM and connected my phone, then automatically found and advised me of the update ready (previously downloaded and installed on the PC) and I could click to update as usual.

    Perfect.

    States of the article on changing the DTM settings through Control Panel, or reinstallation of DTM. But I have this bit and it worked-I simply uncheck automatic updates in DTM, delete the 2 files started vendor.xml DTM, plugged the phone, told me I had a new update!

    Hope this helps

    The full post is here http://www.blackberryos.com/ general discussion / 25830-when-desktop-manager-cant-find-latest-os-you-just-loaded.html

    called "DTM when cannot find the last OS update you just loaded.

  • Version of the restore software Z30 blackBerry 10.2.1.2102 a downgrade to prove if the camera back is defective.

    Dear community,

    Having just bought recentlly the Z30 once connected to the internet immediately, he went for an upgrade of software to 10.2.1.2102.I then continued to test all the features on the phone to see that my rear camera did not work. I immediately jumped on a forum and found there are others who have experienced a few problems too. I thien tried in vain to reload the software, soft and resets hard have been applied, but to no avail. I have no idea whether or not the rear camera is defective. Then I tried the BBVE and it failed the test of the camera back. Incidentally when rear camera mode it says mode scren failed, camera not found or flash failed. I then need ot a hardware reset in FLIGHT by applying the flight towards the top and the low UNLIMITED to perform a reset which releases all of the applications in use.

    I also read that there could be problems with the memory card so I removed this option to eliminate the problem.

    Not sure if there are defective batches of stock out there but I bought my phone on ebay and he said: PRD-52977-013 manufactured in Mexico 5110913.

    I don't know if the machine worked before the software load went in asking so therefore how to recharge the old version of the software to a version where I can see if the device works or not.

    p.s. The phone I bought was sim free and I use it on the Vodafone UK network and the box was sealed if the seller would have no prior knowledge of the handset, as it was purchased New.

    Thank you

    Allan

    I think you're right. The problem is with the hardware. I see nothing else to try, diagnostics say camera problem. Maybe the seller may exchange it?

  • The real world Z30 blackBerry battery

    What is the use of the normal battery of a Z30 (can it last a full day with moderate to heavy use)? I have a Windows Phone 8, battery life is very good (was able to go more than 30 hours with moderate use). Before Android, battery wouldn't last more than 12 hours (on average), with light to moderate use.

    I get two full days of use with my Z30, and with her being on it during the night. I was not able to kill the battery in one day, no matter how hard I tried (and tried). You will NOT be disappointed with the Z30 battery... it's one of the features of the phone sale.

    See you soon.

  • Replacing the screen LCD Z30 blackBerry for Z30

    I can't find the support Web site of the spare parts for my 30 Z in the Blackberry.ca. I am looking to buy a replacement screen LCD for my BlackBerry 30 Z if possible or any company that sells official part, I can do it myself, I just want to buy, thanks

    As Leslie said, eBay and Amazon have them, I've seen them for $45 - $70 each.

    Make sure that you don't get the Verizon version, you want the GSM model which is more common.

    I replaced mine and helped a friend with a replacement, it is a very simple process to remove the 8 screws and using a pry tool to open the back, disconnect the ribbon cable and then turn everything above.

    Good luck.

  • BlackBerry 10 Cant update to the new version, still running 10.0.9.2372

    Hello

    I want to know how can I update my Z10 I buy one unlocked from UK and I use T-Mobile service, I can't update via the Web site, wifi, or blackberry link, when I try a message pops up saying that there are currently no updates.

    I'd appreciate your help, thank you

    Follow the instructions in this link below and take note of the first chip in particular.

  • Software of blackBerry operating Z30 will not update to the latest version

    10.3.2.2474 according to the link for Blackberry is available to update me. Despite goes 4 or 5, it stops at 7% and says check connection, or try again. I've done both. It's maddening that she does. Moreover, the phone says there is no new update - contradiction!

    If you take the SIM card out of the camera and reboot, you can get notification of update of the software on the device.

  • Problem recording network Z30 blackBerry in Z30

    I have model STA100-2 Z30. I use it in India with BSNL network. The problem I face is re-registration of the network. Every time that I lost network connection, it couldn't not re - register in the network. I need to restart the phone to re connect. Even I tried g manual network and to connect to my network, but he could not, I even tried the other service provider like Vodafone and idea SIM card but the same problem occurs. When I reboot the phone it connect with the full signal strength at the same place. It was later updated to OS 10.2.1.2977. Now what should I do to make it perfect?

    I suggest get a free exchange of SIM of your mobile operator. You may just have a bad SIM card.

  • 3/10/11: Vista update story reported that an update to the Blackberry smartphone failed to install. How can I get this update or at least know why it has not installed?

    Here are the associated error message.

    Research in Motion - other hardware - BlackBerry Smartphone

    Installation date: 10/04/2011 03:00

    Installation status: failed

    Error details: Code 800F020B

    Update type: recommended

    Research in Motion, another update of the software of hardware released in April 2008

    More information:

    http://winqual.Microsoft.com/support/?DriverID=20165724

    Help and Support:

    http://support.Microsoft.com/select/?target=hub

    Hello

    If Windows Update error 800f020b while trying to install updates, an update that you are trying to install applies to a device that is not connected to the computer. Make sure all your devices are connected and turned on, and then try to install updates again.

    Refer to this article for more information:
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Update of the marshmallow blackBerry Smartphones AT & T private OTA were frozen and will not accomplish

    The AT & T OTA update for the marshmallow has not completed on my phone.  I let it run for about 2 hours and then a message appeared that I intrepretated like done, but it was not installed.

    The updates will appear a message with two boxes in gray:

    "Check for Updates".

    "Continue update"

    'BACK' is below which rejects the window.

    The phone seems to work fine with 5.1.1 always active.

    SO, can I recover from this and get the OTA installation or what I need to do a factory data reset or do I have to install the automatic charger for AT & T on Crackberry?

    Hi @jgrobertson

    Perform the workaround steps in this KB and let me know the result. Thank you!

    38162 PRIV blackBerry seems to have frozen on reboot after upgrade to Android 5.0 lollipop to...

  • Problems of updating the app with a new BlackBerry ID token for the signature

    Hi all

    Since may 2014, I have an application that I update often... This may 2015 my BB ID token expired, so I created a new one with the same BlackBerry ID account, that I have used before. However, I am facing some problems to make a new update, I got the "file bundle (votre_nom) was rejected. Package ID is required for all .bar file. "If this is an upgrade, ID of Package must match the ID of Package original batch file."

    The thing is, my application has been signed with the same BB ID account and keep the same package name, as always.

    Circumvention of this topic (link here) say contact at BB Vendor Management Support to update my application, but is not guaranteed retain the same downloaded application to the BB world.

    My question is: if I generate a new BB ID token with the same account ID to BB, and I keep the same name of packgane, how can I do to update my application without losing my users?

    THX

    The account name or package BlackBerry ID has changed.  It is the only cause of this error.  Here's how you can verify that it has changed.

    1. Open your original BAR file with a utility like WinZip archives.
    2. Extract of the MANIFEST. MF file in the META-INF directory.
    3. Repeat this procedure with your new file BAR.
    4. Open the manifest files in a text editor.
    5. Compare package-author-Id and the name of the Package in the manifest.

    If the package-author-Id is different, the application was signed with a different account.  If the Package name is different, then that changed.

    If you find that package-author-Id has changed and you do not know what account has been used send me the package-author-Id in a private message and I can watch it for you.

  • Z30 Z30 blackBerry and Blackberry Travel

    When booking a flight with Westjet or Air Canada online as soon as the confirmation e-mail gets Blackberry Travel is updated and flt details etc are in my camera. However when I book a flt with wear nothing happens. Can someone tell me why? Y at - it a setting I need to change?

    Thank you

    Pat

    The address should be [email protected]

    In addition, you must send to the address that is registered with BlackBerry Travel.

    If the route is not sent automatically, might be you had the itinerary sent to a different email address of your BlackBerry Travel email address and that's the problem.

    In addition, you can add multiple email addresses to BlackBerry Travel. But you must send one of them.

  • BlackBerry Smartphones Priv - updates in the game... store?

    I've read about updates online via game store.  Is there something that we do to check the updates in the store, or its all pretty automatic?

    OS updates will be get pushed automatically, but you can check manually. For example, if the update is online at 12:01, it may take a few hours before it grows automatically on your device in order to manually check to get it immediately.

    App updates such as the BlackBerry Hub, keyboard, launcher, etc come from the game store. These must be automatically updated on your device according to the parameters

    The reason for this division is so that we can update the various BlackBerry applications when necessary without having to do a full update of the OS.

    I hope this helps!

  • Mixture of blackBerry software does not not after update on the device

    I got an update for mix today on my phone in the world of the BB.  Updated correctly.

    Now, the desktop version requires an update, but there is none is available.  Therefore, the desktop version will connect is over the phone.

    Seems strange that BlackBerry was going to release an update for the phone before a compatible version of PC.

    Hi @ssbtech & @bbbl67

    Thanks for your patience! The mix Web site will be updated soon

    You can download the software to put office to update right now, but using the direct links below. Thank you!

    10 BlackBerry Desktop Software for Windows > http://blck.by/1LSxTLF

    10 BlackBerry Desktop Software for Mac > http://blck.by/1HOGVb1

  • Away you smartphones blackBerry 7.1 update on the Torch 9810

    I just did the update for the new bundle of 7.1 from my PC. Twice he has lost the connection to the phone after the restart and comes up with an error 507.

    Fortunately www.blackberry.com/507 tells you how to recover your old operating system.

    It works very well, so there is nothing wrong with my phone or computer - it's the * beep * update which is screwed!

    I just found out (I only got the torch for a few months) that "restore" from the desktop software is not restore your applications! I hope it will work http://www.ehow.com/how_5864947_restore-blackberry-apps.html

    I restore all the bundle 7.0 for the second time.

    A great way to waste an eveneing...

    jbraner wrote:
    Well, it's not particularly useful - is it?

    You've upgraded to 7.1 without problems?  YES

    It will not install. There may be something wrong with the phone or the PC or desktop software - or it wouldn't restore to 7.0.

    Of course, it takes something like that to get a 'full backup' account with the desktop software does not save 3rd party applications!

    Well, another night spoiled...

    You can back up the applications but is not a native function

    Basically, you make a switch unit and once saved, copy the files and cancel the switch.

    Itinerary here

    http://CrackBerry.com/BlackBerry-101-backing-3rd-party-applications-your-BlackBerry

    I use the Desktop Manager as much as all my apps can be downloaded from the app world, but I know that some have collected more special and above will help you in the future

    This is how to update an operating system

    Manual device OS upgrade instructions:

    1. start by searching for your operator and the system operating file that you want to use.

    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

    2. make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

    3. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

    4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

    5. This step is not necessary unless there is a problem on the next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a full backup), then after you get the 507 error (no OS installed) then proceed to step 6

    6 remove the internet connection for PC and reboot the PC.

    7. plug the BlackBerry and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file was in.

    8. If you did step 5, restoration of the back upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

    Take advantage of the new operating system.

Maybe you are looking for