Updates from the front panel

Similar Questions

• Want 5530: want to scan from the front panel of the printer computer

  Hello

  I am not able to use the scan to computer function from the front panel of the printer to a PC recently updated.

  On the front panel, I press 'Scan', then 'computer '. The name of the computer to which I want to scan is listed, so I select it. The scan preview screen appears then I press 'analysis '. After a standby display told me that the computer does not have to check the cable, etc...

  The PC is turned on, and the connected user.

  Printer is connected directly to the PC via USB cable.

  PC operating system is Windows 64-bit 10.

  Printer is 5530 want all-in-one.

  HP Print and Scan Doctor no problem.

  I tried with a disabled firewall.

  I uninstalled and reinstalled several times (using a new download of HP).

  When I open the printer software 'manage the scan' is not listed (only the Scan item is 'search for a Document or a picture", that works).

  Test page will print from PC.

  Another PC (running Windows 8.1, connected via a network) seems to work.

  Any suggestions?

  Hello

  Thank you for using the HP Forums.  You can try this:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1 uninstall the software from your computer

  Try this program to uninstall Microsoft

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  If you are installing via a USB connection, connect the USB cable only when prompted by the software.

  Let us know if it works!

• my hp phtotsmart d110 series is no longer able to scan to PDF from the front panel.

  my hp phtotsmart d110 series is no longer able to scan to PDF from the front panel. How can I solve this problem?

  Hi Jaci17,

  1. open the Solution Center, and then select settings

  2. select scan settings

  3. delete the shortcuts on the right side

  4. click on the device to update, and then close the scan window

  5. open again the scan window

  6. add shortcuts on the left side to the right side

  7. click on the device to update

  8. try scan from the front panel of the printer

  

• How remove the border from the front panel when vi is running?

  How can I run a vi without its grey border front?

  Or how can I color border of the Panel front black in order to run it on a desktop computer whose color is black?

  In the attached vi written in labview8.6, I would like to launch a vi and display an image, a checkerboard, for example, without the white border of vi.

  I hope not to have to the size of the vi to a size greater than the size of the screen that I would like to move the front panel of the vi to different possible positions on the monitor.

  Thank you

  Rob

  In the properties of the category VI "Appearance of the window", go into customize.

  In the appearance of window customize, uncheck the check box allow the user to resize the window. It will be useful.

• Stop an application of loop within an event from the front panel

  Hi all

  I was asked to add a stop button feature to a vi wrote to someone who is no longer with us. They wrote a "loop" feature is to crunch some data and adds it to a file during each iteration of the loop for. They put that inside a structure of the event. Is there a start button that when pressed triggers the event containing this loop. The program takes a long time to run each iteration of the loop (sound using serial communications to transfer data, it crunches and then add to the save file). If the wrong file, this can take a long time to run in full. If you stop there, other issues with resetting devices, what it is communicating.

  I need to add a stop button to close the event at the end of the next iteration of the loop for. is possible for the 'down' in the loop inside the event information once it has been triggered? I have very little experience with the structure of the event other than Basic programs to test.

  See you soon,.

  Alex

  If this description does not describe the problem, I can publish a modified version of the .vi showing the basic idea of what they have done and what I want to achieve. I am unable to put the real .vi due to NDA issues.

  You can right click on your for loop and add a conditional terminal:

• Windows update fails when it is opened from the control panel.

  I have a very annoying problem and critical. After install correctly update windows, now I can't open "Windows Update" from the control panel. If I click it, the windows unresponsive and freeze. Help, please.

  ... Even when I update windows is not running except Windows Defender antivirus.

  Unfortunately, that does not necessarily mean that another application of Norton didn't was not preinstalled on the computer when you bought it.

  Given that you use Norton Online Backup and have no intention of buying it, see if the correction of several next step solves your Windows Update problems. [Note: nothing in my dose can damage your computer.]

  ACTIONS

  [You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all steps in one uninterrupted session! [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications.

  3 uninstall Norton Online Backup via Control Panel | Programs & restart. See: http://www.technipages.com/windows-8-uninstall-applications.html

  4. right click on the file that you saved in #1 above and select run as administrator to run the utility, and then reboot again.

  5. download/run scripts appropriate of the following trusted Source (my colleague IE MVP Kai Schatzl): http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  Note-online scripts are good to IE10, too,

  Tip: The file named ie8 - rereg.all.zip contains both scripts below (more than one third that you will NOT use).

  6. close all open applications (i.e., anything with an icon on the taskbar), and then double-click the file named ie8 - rereg.32on64.cmd to run the script.

  6. close all open applications (i.e., anything with an icon on the taskbar), and then double-click the file named ie8 - rereg.64on64.cmd to run this script then restart.

  7. reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [1]

  8 manually reset Internet Explorer (do NOT use the Fix It!) by the specific Win8 section on this page: http://support.microsoft.com/kb/923737#method1

  9 restart the computer.

  10. run the tool for troubleshooting Windows Update from start to finish by the instructions on this page, then restart once more-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  11. start a manual check for updates. Assuming that KB2813170 is available once again, see if you can install it with success now; Follow all the instructions.

  12. in response to this post with a status report. [No emergency]

  =========================================================
  [1], when we completed this thread, feel free to one of your browsers alternating reaffirm as a default again if you wish.

  [2] full Disclosure: run the troubleshooting tool Windows Update deletes yourhistory of update but not the list of installed updates.

• Best way to share/update buttons on the front panel

  Hi y ' All!

  I am a beginner in LabVIEW (2 years experience: 1.5 academic year and a team of the FRC and professionnellement.5 of mentoring as a new graduate in a startup).

  We develop an application using LabVIEW which is intended to be user-friendly touch screen and we have so many front-facing button with which we are dealing. In order to make the code more readable in force and easily scalabe, I will like to know if there is an effective way to process orders from the front.

  To illustrate, let's say I have this UI:

  

  

  The real way we propagte these controls is to create a cluster of the reference of all controls (it's where I wish we had LabVIEW 2012-_-) once unbundle that we need in the appropriate section of the code (means it's a large number of sons everywhere...)

  

  So are there better ways to achieve the same goal?

  Thank you!

  I'm talking about a Controller of GUI in this thread. This can give you an idea.

  Ben

• pause button on the front panel

  Hello.

  I try to run synchronous, continuous analog conversion of 2 cards of PXI-6259, and capture the State of the several digital at the same time.  I managed to get everything is configured and working properly, however I have a problem if the user presses the button "pause" on the front panel.

  From what I can tell, acquisitions of data will continue to run in the background (I'm using a task DAQmx and stop was never called).  For my analog inputs, this is not a problem.  However, the digital inputs always generate a ' 200010 - on-board memory overflow error. Due to the limitations of system and/or the bandwidth of the bus, the driver could not read data the device enough fast to follow the flow of the unit. »

  Is it possible to register for an event of user interface that is generated when the user presses the button "pause", so that I can stop the acquisitoin of data before the error occurs?

  Thanks in advance,

  -Rich

  NormPgh wrote:

  I thought to add my own button "pause" / control, but my users have become accustomed to hitting the pause on the front panel button, and it will be difficult to get them to change.  I guess that the error would remind them :-)

  Well, that's easy to fix - change the appearance of window properties if the toolbar is not visible, while the code runs, and there will be a pause button for your users to click.

  Many of our applications have a function somewhat like this.  My colleague implementation in a very simple way: he put the graphical indicator within a box structure.  Connect a Boolean control "pause" to the structure of the case, and that's it.  Data acquisition runs constantly but will only update the chart when the pause button is false.  This approach might work for you?

• Outsourcing of the controls on the front panel for a panel floating Subvi

  Hello!

  I already found a few similar topics, but I still don't know which is the best way to solve my problem. I will try to describe my problem in detail first: I have a main VI that acquires data from a device and displays these data in a large waveform graph. I have also a few controls on the front panel to control my device. First, I placed all of these device controls (digital, sliders, etc.) as well as the chart inside the front of my main VI. However, due to limited screen space now I would like to make the largest possible graph and so decided to "outsource" some controls out of the main façade of VI to several panels front-end Subvi.

  I would then press a button in my main VI and it would open the Panel before the floating of the Sub - VI corresponding with outsourced controls when required. However, everything must be absolutely transparent. It is important that floating panels to run in parallel with my main VI, that is the main VI must continue to operate. That way I'll have my data constantly updated in the chart in my main VI while I can change some settings of the device through the controls placed in my SubVIs. These changes will be immediately applied (for example as soon as the main VI calls this slot - VI in its main loop).

  It is important to the visibility of the outsourced optional control panel, i.e. If the Subvi front panel opens with the user that it will pop up and the user will be able to change the paramers device using the. But then the user should be able to close the front panel (hide) the Subvi to see the entire chart again without the Panel floating in front of her (of course control values must be maintained when the Subvi front is not visible). Then the new button is pressed in the main VI that opens the dialog box not modal Subvi containing controls and it can redefine new values of device.

  Advice how to do this are welcome. I don't know if I need something complex like VI server or asynchronous screws or I can solve my problem by changing some settings simple Subvi? Thank you in advance for your help!

  Best regards

  Anguel

  AStankov wrote:

  How about using a global variable for the VI at VI communication instead of a queue?

  A global variable will, also.  Write you in one place and read the value frequently to somewhere else (in the election). So you can see easily to any value change.  However, mark will waste a lot of time processor.  This is why I have proposed to use a queue or a notification utility.

  AStankov wrote:

  Would be the last option that you mentioned, i.e. finish the Subvi at each change of value, I would keep the Subvi front open as needed until things from the user to hide? Or would there be inevitable flickering Panel or any other drawbacks?

  Yes, the Subvi can keep the façade open until the user closes. And there should be no flickering.  The biggest drawback I see right now is that when you expect an event in the Subvi, the mainVI cannot stop without talking to the Subvi to stop.  So you'll need another channel of communication (again a global, a queue, a declarant or an event) to tell the Subvi that she must stop.

• How to scroll through the front panel when running

  Hello

  I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

  -Thanks in advance

  Hi, Mary,

  Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

  I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

  For example, "quick and dirty" implemented:

  

  Andrey.

• Cannot resize the front panel

  I can't resize the front panel to a smaller window.  I put in (0,0) minimum window size, unchecked maintain proportions and to scale all objects.  I had originally put the size of the minimum window to 1012 x 616.  When I close the window property and re - open the settings still collated (0,0) while they are saved, but I am unable to reduce the size of window smaller than 1012 x 616.

  Also, there is open space on both sides in both dimensions, so I'm not running in the front panel objects.  What property/properties miss me that locks the minimum panel size?  One last thing is that I'm able to resize windows from any SubVIs I the same project and edit the minimum window size them and they respond as expected.

  Thank you

  Very strange

  comics ctrl + A, ctrl + C, ctrl + N, ctrl + E and ctrl + V solves everything.

  NOR should open with a debugger that vi... Oh where is that entry again heep peek ini thing...

  [Edit: here]

• Export the graph on the front panel to the Clipboard

  Hello

  I want to export chart (image not simplified, but exactly as in the front panel) to the Clipboard. Then, I'll paste the contents of the Clipboard to the MS Word document.

  How to export the chart image to the Clipboard?

  Thank oyu.

  If you're using Windows, you can also use the library in the attachment from the message.

• How can I insert a jpeg image in the front panel

  Hello

  I'm new to labview and have written a vi using a data logger NI USB-6008 reading from a sensor that performs a calculation and then displays a value. I am trying to put the logo of our company on the front screen when running, but can't work out how to do it. The logo is a jpeg file.

  I use the trial version 2010.

  Thank you

  Andy

  Hello

  Drag / move your jpeg file from windows Explorer to the front panel of your VI should work.

  Hope this helps

• How to get rid of the reference lines on the front panel

  I forgot how I created a couple of horizontal and vertical lines on the front panel. It seems that the original on the front lines. When I move my program to another monitor with a different resolution, the layout is messed up because of the reference lines cannot change the resolution. Everybody respected this before? How to get rid of them?

  Attached are the 2 creen shot of facades.

  Thanks in advance.

  Ah, I figured out. I accidentally selected the "scale with objects pane" from the context menu of a button in the tab. This is whence the reference lines.

  Thanks for all your guys help and advice.

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.