[Urgent] E3276 USB Dongle is unable to connect to RV325

Similar Questions

• BlackBerry Smartphones Urgent help, code 102 error, unable to connect with BB Desktop software

  I got the message on the screen error 102 reload software and go to the site Web of BB more 102.

  I followed the instructions but he asked mainly check software was last updated. Can't do anything if my 9810 is not visible when connected to my computer at home with the BB Desktop Manager

  To reload the software in my phone, I first, get a cenection between PC and phone I guess and download from RIM or BB site.

  Is that someone here has experienced the same error code 102 and remember how it was resolved.

  Thank you and I hope a quick answer, it's so nice weather outside...

  Here is the link where I found the instructions on a French-language forum for reload applications using the DOS commands, even if your PC does not see your smartphone when connected. The error occurs when the phone is disconnected from the prosecution, which is starting the program causing the software down and release the error code 102.

  I think that the same procedure can be used for many different with phone software problems when it fails

  http://www.Forum-BlackBerry.fr/showthread.php?1437-sauver-UN-BlackBerry-crash%E9-non-reconnu-par-le-...

• Too slow internet USB dongle connection

  Hello.

  I use the usb dongle for my internet connection at home and I always face problem of idle, I heard that if I disable usb energy saving plan then the dongle are still working on 100% and he can help solve my problem. I understand that for most problems come from the radio part of my internet provider, but they do really anything to solve my problem, but everything is the same, and I try to check the speed of other factors dongle is 14.2 Mbps but mine is very unstable, sometimes even 50 Kbps. Please explain to me how the power of affect to my dongle USB port works.

  Hi AshotMnatsakanyan,

  ·         Have you checked the problem in safe mode with networking?

  Try the following.

  Method 1: Start the computer in safe mode with network and see if the problem persists. Report of the results.

  Method 2: Check if the problem persists when energy saving is disabled.

  a. connect your power adapter. Click on "Start" on your computer screen, then select "Control Panel".

  b. double-click the icon "Power Options." Click the "Power management" tab and select "Never" under "Turn off hard disks, standby system, System Hibernates and turn off monitor" none of these devices will prevent energy saving mode.

  c. click the "Hibernate" tab and uncheck the option 'Enable Hibernation'. Click 'OK' to save your changes

• Unable to connect to the USB Dongle (Aladdin Knowledge Hardlock USB 1.02)

  I use a RIP that requires a USB Dongle (Aladdin Knowledge Hardlock USB 1.02). I am unable to connect to the device. As soon as I check the "USB connection" he shoots himself. If you would like more information, I would be happy to provide it.  Other USB devices work as expected.

  I'm running a guest XP Pro and the latest version of Fusion and tools.

  TIA,

  Laurent

  Laurent-

  If you perform a search in the forum on e00002c5 (the error in the log), you will find several messages stating that some process host has control of the device and is not giving up on it. There are some discusson about uninstalling drivers OSX to allow the virtual machine to grab the device, but it is probably best that you look at and avoid having to misquote me!

  This mistake, by the way, is OSX. We are just reacting to a return of zero by a function call down in Mac-land.

  Hope it will be useful.

  Kevin

• Unable to install Internet dongle, error: failed to install the software & unable to connect.

  Original title: failure of the internet

  not able to connect to internet with zte mf 190 dongle Mr. the problem began when for some reason any I uninstalled the software of the electronic key. Now when I re - insert the dongle it doesn't show signs of usb. In addition, I deleted the software so I can not connect to internet unless the usb dongle is displayed. He said: software installation failed & unable to connect. Maybe there is a problem with the windows drivers. Need help.

  Hello

  I can understand the inconvenience caused to you and I appreciate your efforts to resolve the issue.

  This issue may be caused if one of the many reasons as USB driver are corrupt or unstable PC requires an update for problems that could conflict with an external USB hard disk, Windows may be missing other problems hardware or software updates.

  I would like to know;

  1. What is the brand and model of your computer?

  2. Have you checked with other USB ports?

  3. The problem occurs with other USB devices?

  I would follow the methods below and check if that helps.

  Method 1: Run the Fixit

  Tips for solving common driver problems

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. Press the Start key on the keyboard.
  2. Go in Panel.
  3. Go to Device Manager.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer, it automatically reinstall the USB controllers .
  7. Plug in the removable USB storage device and test to make sure that the problem is solved.

  If the problem persists, follow method 3.

  Method 3:

  Follow the instructions in the given article:

  Install a USB device

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Unable to connect my Qosmio without Virgin dongle

  Hello

  I recently changed my ISP to the Virgin, but I am unable to connect to my laptop without the aid of a dongle that Virgin provided.

  Is there a way I can connect without it?

  And what about Virgin support on this issue?

  I assume that your laptop works properly.

• Satellite A205: Bluetooth USB dongle will connect is AirCable

  I plugged a dongle Bluetooth USB generic on my Satellite A205 and used for several hours over a period of three days to connect to a Bluetooth Serial AirCable to run my telescope controller. The generic dongle worked after downloading a stack of Toshiba.

  Whenever I turned the Bluetooth it incremented COM port numbers
  My telescope controller will not recognize the Comms above 20 so I deleted the Comms that really were not used.

  Connects the USB Bluetooth dongle is no longer the AirCable Bluetooth series. * It worked before and will not work

  I tried three Bluetooth USB dongles different, including TrendNet, AirCable and credits.
  I can not connect the telescope controller AirCable series Bluetooth with all the dongles.

  _ * Someone can suggest a monitor Bluetooth that will work, or suggest a way to get my A205 to work with one of my Bluetooth USB dongles? * _

  Don

  What battery Bluetooth has been bundled with your Bluetooth adapter?
  You must use it. If it was the Toshiba Bluetooth stack while I would use the custom Mode of it to set up the COM port that you like, for example, COM6.

• Chromebook C720 - no mobile internet connection with my usb dongle - even not recognized.

  Hello

  Your help please. I use an Acer C720 Chromebook bought in England but I am now at the Brazil and I can't access my mobile data plan - the operator is TIM and the dongle is Olivetti, Olicard 160. I can access the WiFi from the nearby square, but this means I have to perch on the edge of 3 inches from my room window, is not comfortable. I have an Acer Aspire One D255 with me as a return to the top (good job, I) and it uses the same USB dongle without any problems - but in 3 years much more slow and clumsy as the chromebbok for inernet - but it works. Back to my problem, why when I plug the USB to TIM with SIM in my Chromebook C720, is it not recognised? All opinions more welcome, because I'd use this Chromebook sitting at my table, if possible to the Brazil! Thank you very much, Baldocci - a semi luddite.

  Not a lot of support for this kind of material in Chromebooks. I've heard more support cell adapter is coming, but I've heard that for a while. Many even dongles are not working with Mac so your best option is a personal mobile device, MyFi. In this way, you can connect your Chromebook through the WiFi of this adapter part.

• EA3500 unable to connect USB printer

  I'm unable to connect to a printer using the USB port on my new Linksys EA3500 router.

  I followed the instructions here: Support Page , but my version of Cisco Connect not not the option "connect a USB printer»

  I'm on a macbook pro OSX 10.7.4 and my version of Cisco Connect is 1.4 (12005.2). Version of the firmware on my router is 1.0.30.126544. A screenshot of what I see after having clicked on "Add a device" in Cisco Connect is below. The printer is a HP DeskJet F4280.

  

  Please notify.

  Thank you.

  I began to question my purchase of this router, as it was rather costly unitl a mod contacted me and asked me to try to update my firmware again. This time, there was an update available installed tonight firmware Cisco Connect Cloud (version 1.1.38.138143) that I was able to connect my USB printer. I know that this sounds like a commercial of Cisco, but the Cloud Connect software and interface is amazing! It's a management tool complete recommended router on the web making it pretty useless old Cisco Connect.  Cisco thank you, I am happy that I now have a refreshed and awesome router! (which printed on my printer usb too)

• Unable to connect my laptop XP Prof on printer Officejet J6450 AIO usb (in network)

  Due to some problems of scanning, I have reinstalled my AIO on my USB port of office instead of the old Dell (Windows 7-64) ethernet link. However, I'm unable to connect from my laptop with XP Pro. I downloaded and installed the latest version of the software of full J6450 and can do a test print, but cannot access the printer through the center of Solution, that's why the scanner and other features are not available from the laptop. Also, is anyone know hence the hp software file is extracted to so I can re - run the Setup file?

  The IOA has a w/l button, so I'll try an instalation w/l on the laptop.

  Hello Tracer_C

  Thanks for responding. The error was 'the scan cannot be performed because another program or computer uses... ". "The w/l installation was successful, after that several unsuccessful attempts. (I accept the blame for it). After 2 or 3 tries, I noticed the obligation to connect the printer to the USB port of the laptop to install the drivers. Apres_que the drivers have been installed the software it reset the network, and it does not connect until I plugged in the printer on the desktop).

  I thought I could do a no-w/l installation, but it is just as well, because I don't often print the laptop anyway, so I can keep the w/l off on the router function until I need to print from the laptop.

  I found the installation for Xp folder: C:\Documens and Settings\Temp\7Z***.tmp\Setup.exe Settings\nom of utilisateur\Local.

• Unable to connect USB key

  I've recently updated to 2.2 view Horizon and I'm unable to connect a USB to the client workstations.  The command I run at startup is:

  "c:\Program Files (x 86) \VMware\VMware Horizon view Client\VMware - view.exe - connectUSBOnStartup true - connectUSBOnInsert true - name of domain mydomain - serverURL . https://VDI.mydomain.org

  All works except the USB 2 options.  What I am doing wrong?

  Thank you

  Yes, it was a stupid mistake on my part.  I forgot to include the USB redirection when you install the client from the view of the Horizon.  I have a task sequence in SCCM 2012 that installs the Windows 8.1 base image, copy the installation in c: drive file and then running the install command.  I've included the option USB redirection, so now the command looks like this:

  C:\VMware-horizon-View-client-x86_64-2.2.--1404668.exe /s /v /qn INSTALLDIR = "% (x 86) ProgramFiles% %\VMware\VMware Horizon view Client" REBOOT = ReallySuppress VDM_SERVER = vdi.mydomain.com DESKTOP_SHORTCUT = 0 QUICKLAUNCH_SHORTCUT = 0 STARTMENU_SHORTCUT = 1 ADDLOCAL = Core, USB/l C:\vmsi.log

  Also part of my task sequence SCCM, for those of you interested, is the creation of a generic local user account and I'm getting a local administrator.  I have a .reg file that makes this car to user log when the computer starts and the will of computer auto start the client from the view.  In this way, all the bishoprics of the end-user is the window to view customer logon and they just have to go in there Active Directory username and password.

• Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hi, I have a camcorder Sony TRV 356 I am unable to connect on vista or windows 7 via USB

  Hello Sajid,

  The community here is about the countries United States, Canada and Asia-Pacific. Your DCR-TRV356E model is a model British camcorder.

  However, to answer your question,.

  The DCR-TRV356E USB streaming function is not compatible with the operating system Windows Vista and Windows 7. You can connect the camcorder to the computer using the A / V cable connection or using an i.Link cable.

  You can visit the European Forums of suggestions regarding the transfer of videos to Windows Vista or Windows 7 computer.

  http://www.Sony.co.UK/discussions/community/en/support/cameras_and_camcorders

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Help! Unable to connect USB with the computer!

  Hey... I use bike g 2nd GEN recently, when the options of connectivity usb came... I have disabled by error two options... And now, when I connect my phone with cable USB WHAT DO not come connectivity options to the top! And only charges the phone!
  
  I also tried the check in the phone settings... But no use... Help, please!

  Go to settings > storage > tap the icon at the top right (3 vertical points) > Connect usb to the computer, you can select the USB options.

• Windows XP crashed, now unable to connect to the net cause usb 760 not register

  Windows xp installed 2 GB high speed, downloaded 99% vzam, froze, rebooted, frozen, restored before installation, froze, now run anything? What should do? Unable to connect to the net cause usb760 will not register...

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  See the article and check if that helps:

  To establish an Internet connection

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Unable to connect to the ftp to EA4500 usb storage device

  I am unable to connect to my hard drive on the EA4500 from a remote device (pc or mobile) using the ftp protocol.

  The drive is a WD 1 TB and is supported. I use cisco smartwifi to set it up. The player is accsessable on my local network, capable of map and data flow of the connected player on all LAN devices. I have ftp on and implement a file secured with username and password. I tried to connect with the "filter anonymous internet customers' on and outside. I have reset the router 3 - 4 times. Maybe im does not connect make properly. WiFi Smart Displays the FTP server: ftp: / / 172.30.1.19:21. Whenever I try to connect to 172.30.1.19 port 21 in a web browser or ftp program, I get "cannot find server message. I've read through the forums and have not been able to find a solution. Help, please. Thank you.

  So the fix for MY problem was just re-aranging my network would invest and the linksys as being the first unit WAN/LAN on the network of front loading.