Unable to connect my laptop XP Prof on printer Officejet J6450 AIO usb (in network)

Similar Questions

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OfficeJet Pro 8610: Unable to connect 2 laptop HP Officejet Pro 8610

  I have 2 HP laptops each with Win7 (64 bit) SP1 and I'm trying to connect to the computer laptop 2nd in an OfficeJet Pro8610 to print wireless.  I tried using the CD rom and download the drivers online but I can connect this laptop to the printer.  I get to a point where the login process requires the printers claim id code but when I enter the code I got a message that this code is already in use (the other laptop is connected wireless) and in order to connect, I have to delete the other laptop.  I am at a loss here because I had both the same laptops connected to my old 6700 OfficeJet and could print without any problem installing wireless at all.

  What I'm missing here with the 8610?  Thank you

  Alkymst

  Alkymst

  The code you enter is likely to set up ePrint for the printer address.  Once this has been done it is not necessary to do it again.

  An alternative is that the laptop is connected directly to the printer with direct wireless wireless.  In this case, you will need to disconnect the laptop computer from the printer to use the other laptop.

  A better configuration would be to connect the printer to your router wither wireless or cable LAN cable.  It would give the IP address which you can find by pressing the front panel of the printer to the printer (if the printer is in mode "sleep"), then tap the wireless at the bottom of the screen.  This will bring up the LAN wireless status, where you can find the IP address of the printer.

  You should be able to set up the printer with the driver available at http://www.hp.com/go/toolsinstallation wizard.

• Unable to connect the laptop to the printer in a home network

  I just installed a HP Pavilion dv4 laptop, running windows 7 (64 k) and a router Linksys E-1000 of wireles in my home network, consisting of an HP pavilion a6150y desktop, running MS Vista Edition home premium (32 K), to which a HP Photosmart C4280 printer is connected via a USB port. All internet and e-mail functions work perfectly across the home network, except that I can't print from the laptop to the printer. I understand that the C4280 should function as a print server through the Desktop, but I can't print from the laptop. Heterogeneous operating systems cause inability to print from the laptop? Any suggestions?  The laptop has no problems printing to the C4280 when connected directly via a USB cable to the printer.
  Troubleshooting: I ran across the network installation procedure, but nothing helped. The printer has never worked since installation of network components House (e-100 of Linksys and the HP dv4 laptop) anyone can propose a solution?

  First of all, you need to set file/printer sharing and share the printer. If you have already done this and can successfully transfer a file both ways between the two systems, ignore the information of networking at the end of this post. Then you download from the site Web of HP for Windows 7 64-bit print drivers.

  http://welcome.HP.com/country/us/en/support_task.html

  Install the printer on Windows 7 computer and it should be considered during the installation procedure. If it isn't, then install the printer as a local printer instead. To do this:

  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

  If you have not already created your LAN file/printer sharing:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  The Windows 7 network type must be on "Home" or "work". The type of Windows Vista network must be on "private". "Public" is for when you are connected to an Internet connection 'foreign' as an Internet café, at Starbucks or a hotel, etc. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  In Vista, turn on password protected sharing.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. In XP, you can run the Network Setup Wizard or just enable file sharing / print in the Windows XP firewall exceptions. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  MS - MVP - Elephant Boy computers - don't panic!

• Unable to connect to the Dell 966 wireless printer.

  Original title: unable to connect to my wireless printer

  My laptop is a dell running windows vista and I have a Dell 966 printer all-in-one. I can't have printer to pick up the signal from my laptop wireless. Im not to share the printer also. All the indicators are on my laptop and printer. I also have no ip and not the gateway ip address.

  Hi gus,.

  Than you for your message.

  "I can't printer to pick up the signal from my laptop wireless."

  You use a wireless router to share your network?

  "I also have no ip and not the gateway ip address."

  Is - with reference to the computer or the printer?

  "The question is my cell phone and my printer can not communicate. My printer does not have an IP address.

  You try to get the laptop to deliver the IP address of the laptop?

  I propose to move the printer closer to the network router to isolate the interference problems.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Unable to connect the laptop to the TV via the s-video port

  I was able to connect my PC toshiba laptop (windows XP) to our old TV using an s-video cable.
  We have improved tv to another TV (pdp-507xd) and I can't the link with the laptop.

  I tried the s-video and also a RGB. The RGB show on 'view', as if I'm linking to a PC. The s-video looks ok but no display on TV.

  I miss something really simple, but any ideas please?

  Hello

  To my knowledge on many television s-video option must be activated first.
  I put t know your TV device and I m really not a TV expert, but check the user manual and check if this option should be enabled before using it!

  Then again try the FN + F5 key combination to switch to the TV device!

  Good luck

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• Unable to connect to laptop after name change

  I have a laptop on my domain name that I use RDP to configure. I just took the laptop out of the field to change the name, now that the laptop has been postponed on the field, I can connect is using the name of the computer.  However, I can connect using the IP address assigned.  What can I do to be able to connect via the name?  Thank you

  Hello

  You need to change the name on the server, to associate the new name with the old IP.

• Unable to connect to laptop E1200 Vista.

  I recently installed a router E1200 to a friend.  We have all two laptop computers HP running Vista.  Mine connects wireless ok but its not working.  Network and share on his watch Center a connection between the laptop and the router, and the router is identified correctly.  But the link is broken between the router and the internet.  I made a little troubleshooting before I ran out of time.

  I have configured the router using the Cisco Connect cd.  Did not have a USB key, I went to every computer laptop and added a profile wireless to the router using the same Type of security (WPA Personal), Type of encryption (AES) and security key.  Mine connects, the sound is not.

  IPCONFIG/ALL shows that the two laptops got IP addresses in the DHCP of the router range.  The list of DHCP clients on the router shows the same.  I tried to reboot the router, remove and add new profiles, the same results.  Apart from the IP addresses and mac the IPCONFIG/all are identical.

  I won't be able to get there for a few days. I have a list of things to try and hoped that someone would have other suggestions.

  His laptop is Vista SP1 and mine is at SP2 and other patches because I run automatic updates.  I intend to bring his laptop to the latest patch levels.  Our wireless adapter models are also different, so I'm going to download the latest drivers for its.

  I'm going to update the firmware on the router if necessary and return the router to its default configuration.

  I'll use Cisco Connect to reconfigure the router and change the SSID and the installation time keys create.

  I'll set up two laptops using the setup button and see if they connect.

  I read something about a broadcast flag DHCP between some routers and Vista problem.  There is a registry edit fix for the problem of Microsoft, but it does seem to apply in this case because the IP addresses are assigned correctly

  Any help will be most appreciated.

  Install the Atheros HP sp48070.exe patch solved the problem.

  Thanks for your help.

• Unable to connect to laptop using the microsoft account

  Try to connect to computer laptop microsoft account and he said: I can not connect at this time. Change password etc. After several attempts can usually be connected but so annoying - try again now after 50 minutes. You have to go on another computer (apple!). What is going on. I want more convenience

  Hello

  I'm sorry to know that you can not connect to the computer. Let me try and help you with this problem.

  (1) you have an active network connected to the PC?

  (2) did you do with the last changes made to your computer before this problem started?

  (3) are you able to connect to Microsoft online account? https://account.live.com/

  (4) using an Internet connection wired or wireless?

  This happens usually if there is a network connection problem or it could be a temporary problem.
  
  First, if you are a using a wireless connection, please connect your PC to a wired connection and check if you are able to connect.
  If this does not help, you can reset the password and check that helps. You can connect to the Microsoft website https://login.live.com/ account and reset the password, and then check.

  Let us know the result. If you have any other questions, we will be happy to help you.

• Unable to connect TV laptop with Intel WiDi 42VL963G

  I wanted to ask you kindly a helping hand because I'm having trouble connecting my computer to the TV via intel WIDI.

  I declare that they are in possession of a TV TOSHIBA 42VL963G accompanied by key dongle WLM-20U2
  The COMPUTER AND ' a LENOVO... S300 fully compatible with the intel wi - di. "I also downloaded the updated firmware TV proposed by you. So all is good.

  Now, I describe the steps that I followed and where it gives me problems:

  1 APRO TV AND AFTER LAUNCHING THE APP WI - DI MI NORMAL SCREEN IS SHOWN FIRST CONNECTION

  2. AT THIS POINT AS SUGGESTED APRO APPROX. COMPUTER WI IT WORK BEGINS TO LOOK FOR THE ADAPTER.

  3 ADAPTER IS RECOGNIZED AND IS REGULARLY PRODUCED IN THE PC OF THE SCREEN. WITH THE NAME OF "TOSHIBA LCD TV' AND DO I select ' START THE CONNECTION.

  4. at this POINT on TV, I get security to 4-DIGIT NUMBERS THAT I insert, AS suggested on THE PC THEN I click on CONTINUE

  5. HERE "START THE PROBLEM: THE SCREEN FOLLOWING INSTEAD OF"
  HOW DOES the DEVICE TV, MI IS a DEVICE BEARING THE NAME OF "Mstar-TSB."

  6 PROVO OTHERWISE CONTINUE WITH WHAT IS RECORDED
  * THE PC if you click on THIS TEMPORAL CODE 8 FIGURES MADE BY PC as instructed ' CONTINUE it BUT NOTHING...

  I tried and tried everything I get is always the same device instead of TV 'Toshiba LCD TV' and the computer cannot of course REGISTER AS A LINK.

  Hello

  In order to use the Intel WiDi the Toshiba Dual Band
  Adapter WLAN WLM-20U2 is necessary.
  Do you use this adapter?

  Also you can find here in this manual detailed step by step instructions how to use the Intel WiDi (page 56)
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/VL963-424755-English-specific.PDF

  In addition the name of the device TV Intel Wireless Display he is editable.
  a preferences menu, press B or b to select Setup and press OK.

  b press B or b to select Intel® Wireless Display Setup and press OK.

  c select Intel® Wireless DisplayName, then press OK. The software keyboard window will appear.

  d enter the name of the Intel® Wireless Display device using the software keyboard (see page 46). Press the BLUE button.

  e highlight done and press OK to save your settings

• Unable to connect to the internet through hp5510 printer

  As the subject line says:

  It's a printer Photosmart 5510. It prints and scans perfectly and all four laptops I installed it, the hp update downloaded software.

  When I first set up the printer, I was able to access additional applications online. After about half an hour, I lost the internet connection through the printer.

  I had installed using the automatic ip address selector and he gave me an address of 169.254.xxx.xxx.

  I have re-configured manually with a 192.168.xxx.xxx and even if the printer was working well with the PC it still wouldn't connect with internet.

  I have reset to factory settings and automatically and manually configured without success. Also, I restarted my router and changed the wireless channels.

  I can not yet use the eprint service anddownload any apps.

  My son tried to use a proxy, but it still wouldn't connect.

  As I said... .it worked for a short time and then stopped.

  Is there any solution for this?

  Thanks for any answers

  Hello

  Please try to manually set the DNS addresses in the EWS page:

  From your web browser, go to the EWS by typing the IP address of the printer.

  Enter the network tab.

  Click Network

  Click on the network (IP) address

  Under the DNS address Configuration, select manual DNS server and provide the following parameters:

  Define DNS preferred as 8.8.8.8

  and the alternative e-mail address 8.8.4.4

  Click on apply and try to access the Web Serives again.

  If the connection still does not work, and that the configured proxy address, enter the Web Services tab.

  Click the Proxy settings.

  Uncheck the option button, make sure that any field is left blank and click on apply.

• Unable to connect to the internet through the router using Linksys N - USB

  network connection

  I have a Linksys G wireless router on my computer and a wireless adapter Linksys N - USB on my wife's computer. Wondering why she can't get on the internet via my router? Thank you

  Thanks for the response, took the computer to the PC Nerddss and they had all connected it in a few minutes. All right