USB 3.0 not detected on HP Pavilion H8-1030NL

Similar Questions

• WMCW Benelux Tablet case with usb Keybord is not detected

  WMCW Benelux Tablet case with usb Keybord is not detected

  on my Acer Iconia B1 - A71 / Android 4.1 Jelly Bean
  USB 2.0 driver installed

  can someone help me please.

  Welcome to.

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• NEITHER USB-6212 is not detected on the USB bus.

  Hello

  We use an NI USB-6212. We had installed it and works correctly on a test system.

  Now it does not work and what are the symptoms:

  -When it is connected to the USB the led next to the connector bus is not turned on.

  -MAX software does not detect the jury.

  Please, advice me on the steps to check if the Board of directors or eventually send it to repair.

  Thanks in advance,

  Diego.

  Hi Gary,.

  Following the expression "USB-Loader of Firmware" as a hint, I found the following link, related to my problem:

  http://digital.NI.com/public.nsf/allkb/2E02F8EC5D0197928625758C005FFD8D

  I got my computer the "USB-Loader of Firmware" service stopped, while it was "impossible to load the firmware information. Once started, it worked fine.

  Thank you

  Diego.

• USB Devices is not detected! Why?

  My Windows will not detect devices over USB on XP Pro SP3. I checked that a wireless keyboard and a usb flash drive in other PC and work very well! What should I do to try to solve this problem. All items in Device Manager appear normal.

  It turned out that when I reset the CMOS on the motherboard, the ports have started working again!   Thank you

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• USB port can not detect my new camera

  My usb port won't detect a device I have ever connect to the port, when I plug the new device, windows cannot install the driver... always failed... help me please...

  Hello

  1. What is the brand and model of the USB device you are trying to connect?

  2. What is the brand and model of the computer?

  I suggest that you try the procedure described in the article mentioned below.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-CA/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-CA/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Ports USB 3.0 not recognized on HP Pavilion G6-2245sq

  I recently bought a HP Pavilion 2245sq G6 and I encountered a problem with USB 3.0 ports. They are not recognized in the Device Manager. I installed some drivers (Chipset, graphic, Synaptics and so on) and it seems that it did not help with my problem. I confess that I have not tried all the solutions I found in the different posts here on the forum because I think that these specific solutions for laptop. Can someone help me please?

  Furthermore, I believe that I can't have the latest drivers because I am running Windows 7 Ultimate 64 bit and I can only find Windows 8 drivers on the official website.

  I also tried to find a driver for them using Windows Update Driver command in Device Manager and it says that it manages.

  Here is the USB 3.0 for Windows 7 64-bit driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

  Hi all:

  I have this problem on and outside.

  This time, it's ok and next time can be bad that the USB device is unable to detect Win 7 64 bit. It's OK to Win Xp all the time.

  I have referred to as the previous posts for this problem and remove the VID_0781 by REG_EDIT, also try to uninstall the device from the hardware in the computer and re - install the device. I also did the replacement of usbstor.inf in c:\windows\inf to another subfolder.

  from c:\windows\.

  The result is intermittent it's Ok this time and not okay at other times. It's really wasting a lot of time to try this or that, and the result is intermittent.

  Can anyone or Sandisk people leave a good and permanent solution to this problem?

  Thank you and best regards,

  tangsuan

  Hi all:

  I want to update this solution for this problem of Sandisk support.

  This solution may be different from one case to another, but if you have installed Samsung KIES in PC, then most likely it is the solution.

  If you kill the KiesTrayAgent.exe, the Sandisk can be detected smoothly whenever you plug it into my laptop.

  Thanks and respect of the best.

• USB key is not considered to HP PAVILION CORE I5 and MS 7613

  Hello

  I just got my new HP desktop HP PAVILION CORE I5 motherboard MS 7613 and im trying to install windows 7 without success, because in the BIOS the usb memory key does not START options. Don't see these settings in the bios to boot:

  Floppy boot priority group - not installed

  Group - HP DVD-RAM GH60L CD-Rom boot priority

  Group ST3100052AS HARD drive boot priority

  Network boot priority group - not installed

  More than that, I tried testing with two different usb sticks in different USB ports and the system could not start when trying to install windows 7. The two sticks were properly formatted and I have done some testing old NetBook of the mine and windows 7 have been successfully installed from two flash drives.

  One of my usb stick http://www.amazon.co.uk/PNY-Transformer-Attache-Flash-Drive/dp/B009J0HM94

  Second removable disk is named pro usb drive

  Also two usb keys are seen in the bios on the USB PORTS SETTINGS

  Any direction to help me to windows on my machine is very appreciated.

  Thank you, Bobby

  Check in the BIOS for Secure Boot settting_it must be disabled before the CMU machine can boot from any source in addition to the hard drive. Also activate the Boot legacy. Save & Exit.

  When starting with the USB key, press ESC immediately after turning on. This should bring up the boot F9 option where you use the arrow key to move to the low to highlight/select USB Flash. Press on enter.

• USB port does not detect the USB storage

  Hello

  My company gave me a Lenovo ThinkPad L420 and whenever I connect the USB external storage, I am not able to see it on my computer but I can see the unit on Control Panel devices and printers. Please let me know how activate or activate?

  Thank you

  Sayed Toufiq.

  You can google for it!

  http://pcsupport.about.com/od/Windows7/HT/change-drive-letters-Windows-7.htm

• USB flash drives not detected on the Windows XP-based computer

  Original title: flash drives

  I have win - xp on a dell 2400 platform its flash USB 2.4 G & 533 Mhz. readers and cameras are no longer rec. of my USB ports on comp. I formatted & restarted win - xp on the computer to fix this problem without success. Can anyone help?

  Hello

  1. what exactly happens when you connect USB devices to the computer?

  2. you receive an error message when you connect the USB to the computer?

  Check the status of the USB device in Device Manager:

  a. click on start

  b. click on run

  (c) in the Open box type devmgmt.msc

  d. in Device Manager, expand universal serial bus controllers

  e. double-click the device and check if an error message or error code is listed

  Method 1:

  You can run the fix provided in the link below it to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2:

  Remove and reinstall all USB controllers

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

• USB ports do not detection devices

  Hello

  My USB ports are sensors not when I their connection. I hear the noise, which indicates a device has been connected, but when my laptop is trying to install the driver, it gives me an error Code 39.

  I see an icon in Device Manager yellow triangle-shaped when a device has been plugged in. I tried to uninstall and reinstall my driver and running fixit (said mass storage device USB has a driver problem and can't fix), but no luck.

  I'm running Windows 7 Home Basic Edition and tried to insert a USB Hard Seagate Drive, Kingston and a Sandisk USB key (they all work fine on other computers).

  Help, please!

  Hello Marilou,

  Thank you for your response.

  What is the brand and model of your laptop?

  I appreciate your efforts to resolve the issue.

  I also appreciate the fact that you ran Microsoft fixit.

  However, due to USB devices, I suggest you to try the following methods and check if it helps.

  Method 1:
  Uninstall and reinstall the USB controllers and check. Please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.
  (b) in Device Manager, expand 'USB Bus controllers'.
  c. a device under "In Bus USB controllers" right click and click on Uninstall.
  d. perform the same step for other devices. Once completed, restart the computer.

  All USB controllers will reinstall automatically.

  If this does not help, use method 2.

  Method 2:
  Turn off the "selective suspend" feature of the USB hub driver and check the issue. Please follow these steps:

  a. press Windows + R keys, type regedit into the run window and press ENTER.
  b. look for, and then click the following key in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  (c) in the "Edit" menu, point to 'New' and then click 'DWORD'.
  d. Type "DisableSelectiveSuspend" and press ENTER.
  e. in the "Edit" menu, click on 'change'.
  f. type '1', and then click ok.

  Note: This setting affects all USB host controller drivers in the system.

  For Windows update number, I suggest you try using the steps described in this article and check.
  Reference:
  Error 0 x 80070005 in Windows Update when you try to install updates
  http://Support2.Microsoft.com/kb/968003

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Thank you

• "Two on 4 USB Ports is not functioningon my HP Pavilion Notebook PC dv9605ea.

  Problem: I have connected my lap top port Via a USB to a model helicopter to recharge its battery (3.7VLi - Poly battery). The USB port has stopped working. It's the same thing when I tried to use another USB port. The rest 2 USB ports still work correctly. My OS is Winows Vista 32 bit.

  How can I solve them?

  Is your laptop still under warranty?   Check the warranty HP web page

  There is no quick and easy solution.

  To regain the use of ports for laptop motherboard must be replaced.

  With the help of a USB hub that is not externally powered can cause the same results on any laptop or PC laptop.

  You can always check the power used by the USB ports on your PC as in the follwing Windows 7 screenshot.