WMCW Benelux Tablet case with usb Keybord is not detected

Similar Questions

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• NEITHER USB-6212 is not detected on the USB bus.

  Hello

  We use an NI USB-6212. We had installed it and works correctly on a test system.

  Now it does not work and what are the symptoms:

  -When it is connected to the USB the led next to the connector bus is not turned on.

  -MAX software does not detect the jury.

  Please, advice me on the steps to check if the Board of directors or eventually send it to repair.

  Thanks in advance,

  Diego.

  Hi Gary,.

  Following the expression "USB-Loader of Firmware" as a hint, I found the following link, related to my problem:

  http://digital.NI.com/public.nsf/allkb/2E02F8EC5D0197928625758C005FFD8D

  I got my computer the "USB-Loader of Firmware" service stopped, while it was "impossible to load the firmware information. Once started, it worked fine.

  Thank you

  Diego.

• USB Devices is not detected! Why?

  My Windows will not detect devices over USB on XP Pro SP3. I checked that a wireless keyboard and a usb flash drive in other PC and work very well! What should I do to try to solve this problem. All items in Device Manager appear normal.

  It turned out that when I reset the CMOS on the motherboard, the ports have started working again!   Thank you

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• USB port can not detect my new camera

  My usb port won't detect a device I have ever connect to the port, when I plug the new device, windows cannot install the driver... always failed... help me please...

  Hello

  1. What is the brand and model of the USB device you are trying to connect?

  2. What is the brand and model of the computer?

  I suggest that you try the procedure described in the article mentioned below.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-CA/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-CA/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• USB 3.0 not detected on HP Pavilion H8-1030NL

  I have a desktop HP Pavilion H8-1030NL, which are the two usb 3.0 ports are more detected after installation of windows 7 (instead of 8, which came with the PC).

  I checked and could not find the update of TI which is mentioned on the forum, so this probably isn't the problem.

  I would really appreciate expert advisor.

  Thank you in advance,

  Rochus Zeevaarder

  Hi Jaco,

  The doors of USB 3.0 are now detected.

  Thanks for your help. I appreciate that very much.

  Best regards

  Rochus Zeevaarder

• SanDisk Cruzer Blade USB key can not detect properly by Win 7 64 bit

  Hi all:

  I have this problem on and outside.

  This time, it's ok and next time can be bad that the USB device is unable to detect Win 7 64 bit. It's OK to Win Xp all the time.

  I have referred to as the previous posts for this problem and remove the VID_0781 by REG_EDIT, also try to uninstall the device from the hardware in the computer and re - install the device. I also did the replacement of usbstor.inf in c:\windows\inf to another subfolder.

  from c:\windows\.

  The result is intermittent it's Ok this time and not okay at other times. It's really wasting a lot of time to try this or that, and the result is intermittent.

  Can anyone or Sandisk people leave a good and permanent solution to this problem?

  Thank you and best regards,

  tangsuan

  Hi all:

  I want to update this solution for this problem of Sandisk support.

  This solution may be different from one case to another, but if you have installed Samsung KIES in PC, then most likely it is the solution.

  If you kill the KiesTrayAgent.exe, the Sandisk can be detected smoothly whenever you plug it into my laptop.

  Thanks and respect of the best.

• USB ports do not detection devices

  Hello

  My USB ports are sensors not when I their connection. I hear the noise, which indicates a device has been connected, but when my laptop is trying to install the driver, it gives me an error Code 39.

  I see an icon in Device Manager yellow triangle-shaped when a device has been plugged in. I tried to uninstall and reinstall my driver and running fixit (said mass storage device USB has a driver problem and can't fix), but no luck.

  I'm running Windows 7 Home Basic Edition and tried to insert a USB Hard Seagate Drive, Kingston and a Sandisk USB key (they all work fine on other computers).

  Help, please!

  Hello Marilou,

  Thank you for your response.

  What is the brand and model of your laptop?

  I appreciate your efforts to resolve the issue.

  I also appreciate the fact that you ran Microsoft fixit.

  However, due to USB devices, I suggest you to try the following methods and check if it helps.

  Method 1:
  Uninstall and reinstall the USB controllers and check. Please follow these steps:

  a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.
  (b) in Device Manager, expand 'USB Bus controllers'.
  c. a device under "In Bus USB controllers" right click and click on Uninstall.
  d. perform the same step for other devices. Once completed, restart the computer.

  All USB controllers will reinstall automatically.

  If this does not help, use method 2.

  Method 2:
  Turn off the "selective suspend" feature of the USB hub driver and check the issue. Please follow these steps:

  a. press Windows + R keys, type regedit into the run window and press ENTER.
  b. look for, and then click the following key in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USB

  (c) in the "Edit" menu, point to 'New' and then click 'DWORD'.
  d. Type "DisableSelectiveSuspend" and press ENTER.
  e. in the "Edit" menu, click on 'change'.
  f. type '1', and then click ok.

  Note: This setting affects all USB host controller drivers in the system.

  For Windows update number, I suggest you try using the steps described in this article and check.
  Reference:
  Error 0 x 80070005 in Windows Update when you try to install updates
  http://Support2.Microsoft.com/kb/968003

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Thank you

• USB port does not detect the USB storage

  Hello

  My company gave me a Lenovo ThinkPad L420 and whenever I connect the USB external storage, I am not able to see it on my computer but I can see the unit on Control Panel devices and printers. Please let me know how activate or activate?

  Thank you

  Sayed Toufiq.

  You can google for it!

  http://pcsupport.about.com/od/Windows7/HT/change-drive-letters-Windows-7.htm

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• USB flash drives not detected on the Windows XP-based computer

  Original title: flash drives

  I have win - xp on a dell 2400 platform its flash USB 2.4 G & 533 Mhz. readers and cameras are no longer rec. of my USB ports on comp. I formatted & restarted win - xp on the computer to fix this problem without success. Can anyone help?

  Hello

  1. what exactly happens when you connect USB devices to the computer?

  2. you receive an error message when you connect the USB to the computer?

  Check the status of the USB device in Device Manager:

  a. click on start

  b. click on run

  (c) in the Open box type devmgmt.msc

  d. in Device Manager, expand universal serial bus controllers

  e. double-click the device and check if an error message or error code is listed

  Method 1:

  You can run the fix provided in the link below it to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Method 2:

  Remove and reinstall all USB controllers

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Brand new Dell R520 with Broadcom 5719 does not detect installed NETWORK adapters for

  Trying to install ESXi 5.1 on a new R520 with 2 Broadcoms onboard and a quad prot 5719 and install it gets all the way to the end and just which indicates that there is no NETWORK adapters on the system. All BIOS and life cycle the NETWORK maps show. 5719 are on the hardware compatibility list. Ideas, any help would be appreciated.

  Thank you!!

  use iso Dell for your 5.1 installation

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-R620?driverId=XWYR5&osCode=XI51&FILEID=3005015335

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!