USB-8486 disconnects at random times.

I use a USB-8486 with a custom LabView program.  At random times in the execution, the 8486 to uninstall.  What happens on two different computers and three different 8486.  A software reset or a restart of the computer doesn't fix it.  He worked right for quite a while and now began to fail.  I use NI Communications Manager 4.1.1.  When the 8486 outside drops, the CM said that the interface has been removed.

Hello

Please update your software. The latest version is NEITHER-FBUS 15.0.You can download it here.

PS: If you use LabVIEW, please confirm the problem of compatibility before upgrading.  NOR-FBUS 15.0 would support LabVIEW 2012 to 2015.

Thank you!

Tags: NI Products

Similar Questions

  • Satellite L300 PSLBGE Vista 64bits - WLan disconnects at random times

    Hey,.

    I recently bought a Toshiba Satellite L300 (PSLBGE series) computer laptop. It has 4 GB of RAM, so I installed Windows Vista Ultimate 64 on that.

    Problem is that on the Toshiba site there are only drivers Vista32 and with those that I found online, the wireless adapter works, but it keeps disconnecting at random times. It works fine until it stops randomly, there is no message "Network cable" unplugged

    He let go the IP address but I tried to keep a 'ping t' on and it gives "the request exceeded" for a period of time and then it comes back.

    What should I do?
    Thank you

    Hello

    First of all, it would be interesting to know what you have exactly the WLan card.

    I know you could use some WLan drivers from this Toshiba WLan page:
    http://APS2.toshiba-tro.de/WLAN/

    In addition, I recommend turning off some options that affect the WLan in energy saving feature.

    First turn off in energy-saving WLan card properties. (device-> card Manager WLan-> properties-> energy saving)
    Then check the power options of Vista-> wireless adapter settings > power save Mode

    Here this Toshiba doc could be useful for finding these settings:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

    Finally and above all the Advanced tab in-WLan card-> properties > Device Manager contains some useful WLan settings that might increase WLan performance

    Welcome them

  • USB 3.0 Port at random times out the error "semaphore timeout period has expired.

    My USB 3.0 port randomly shuts down completely. I sometimes get a message that says "the semaphore timeout period has expired." I disabled USB selective suspend and verified that the port is functional (Device Manager) and even used my drive hard/USB stick/mouse wireless mouse in the regular USB 2.0 ports. 2.0 ports both products I work very well. Moreover, the stop device, is not related to the volume or type of media, that I'm going through. Yes, any driver alone on my computer is 100% up-to-date (from validation). How can I change this? I feel that I lost all the money on my new USB 3.0 hard drive.

    Windows 7, 64-bit.

    I also had the same problem and host controller Renesas usb3.

    I went to the site intel and downloaded this driver

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19880&lang=eng

    My driver usb3 was updated according to Microsoft and Lenovo.

    Former pilot was 2.0.32.0 according to Lenovo.

    My external drive USB3 now works correctly and not cut or hang PCs.

    No help on Microsoft or Lenovo websites regarding this issue, but it is a HUGE problem.

  • BlackBerry Smartphones USB automatically disconnects from the PC, you can't install OS

    Hello

    I bought a used blackberry 8320. I wanted to upgrade the operating system on it, so I installed the BB Desktop Software 4.5, installed latest OS BB8320m from blackberry.com (4.5.0.294) to my PC, connected my phone to the PC via the USB cable and tried to update the operating system, during the update, my phone automatically disconnected a few times when the installer said "Waiting for device to initialize. After that, he went up to "loading software system...» Stage of module rim.bb... «, then the phone unplugged USB and BB Desktop Software displays an error «a fatal error occurred during the update...» ». At this point, my device showed 561 error with a Windows 3.0 as a window with a triangle, square, and a circle in it. I read online that this can be corrected by wiping the phone using Jl_Cmder. I did this, then he displayead '507' on the screen.

    Now, I said that I can "easily" solve this by simply loading the operating system on the device. But whenever I try to load the operating system, the phone disconnects automatically during installation. It seems to happen at the same stage.

    Later, I realized that if I connect the device to the PC and just leave, it STILL disconnects randomly, almost every 2 minutes!

    How can I fix it? I want to install an OS on my blackberry.

    I tried this on two different machines, different ports and with + without the battery.

    Hi and welcome to the forums!

    A few places to visit: Blackberry 101   tips & tricks

    Have you tried another cable?  Also, be sure that you are connected to a USB at the back of the pc. not a hub or a monitor or at the front of the pc.

    Take a look at this article: troubleshooting USB connections

    Let us know how it goes.

    Great to have you here!

  • Satellite A30 does not start with the USB device connected at boot time

    Hello

    I have a Satellite A30 and sometimes it does not start.
    After turning on, not even the BIOS starts.
    even if sometimes the BIOS starts, but the OS does not load.

    I figured out that its related to USB devices connected at boot time.
    If no USB devices are connected, it starts without a problem.
    Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
    Its ok to connect USB devices later, once the system has started.
    I disabled "removable devices boot" and "network startup."
    just in case, but it makes no difference.

    BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
    printer, mouse and (self-powered) external USB hard disk.

    Is this a known issue?
    There is no known workaround solution?

    Hello

    I put t know why this happens, but it has to do with the BIOS.
    The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
    The only solution is to disconnect the external USB device during the boot process.

    RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

  • Satellite L300 PSLBGE network connection drops randomly times

    Hey,.

    I had this problem with my laptop because I bought 1.5 years ago.
    Now I launch Windows 7 x 64 with the latest bios (version 2.20 - WIN; day 25/02/10), chipset and wireless (the card is a: Realtek Wireless LAN Adapter 8187 B; driver version: 62.1182.0331.2010) drivers.

    The problem is that my network connection drop at random times.
    This produces both with my wireless lan card and it comes up with a variety of routers (at work and at home I use a linksys wrt54gl, but I tried it on all the other routers with the same result).

    I don't think it's a hardware failure, since the network seems to work very well under Linux (I tried Ubuntu 10). Also some time I took it for warranty service and they said that the material is fine, but I should "not use many programs at the same time and use Windowx XP.

    I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

    Thank you

    > From what I understand the different devices (card WiFi, network card, webcam, etc.) inside the laptop are connected to some kind of usb hub. My guess is that it is something wrong with this "hub", given that the webcam works as defective.

    No, the card WLan and LAN card are not connected to the USB just the webcam interfaces so it cannot be any USB issue.

    I think it might be a problem of Windows since Linux is OK

    I think you should check the power management settings in Windows 7 and card Wlan /LAN. This can be done in the Manager of devices-> WLan / LAN card-> Advanced tab properties.

    I also recommend upgrading from win 7 to the last installation of State all updates and patches

  • Micro adapter USB keeps disconnecting when I try to copy the files.

     
     
    Micro adapter USB keeps disconnecting when I try to copy the files.

    Hello

    I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

    Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

    Any help will be appreciated, thanks in advance!

    Hello

    1 did you change on your computer?

    2 did you receive an error message?

    I suggest you to check with the other USB port.

    Method 1:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Method 2:

    I suggest you to remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the Hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  • Request master password at random times

    request password to master at first, with just enough delay to be annoying, then seemingly random times asking once again, if you just cancel firefox continues to be merrily along, a feature really annoying

    This can also occur if you use the synchronization.

    The synchronization used in Firefox 34 version then use password manager to store the name (e-mail) and password to use to connect to the synchronization server.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • My Firefox keeps crashing at random times and becomes more common

    My firefox has been blocked for awhile now at random times. Now it does quite often. I need help to know what is the cause. Thank you

    Has collapsed since difficulty. Looks as it did. Thanks for all the help.

  • Firefox crashes at random times.

    For several months now, Firefox has been crashing at random times. I've been ignoring most of the time, but it's happened more often these days, so I finally want to try to understand what is happening. I guess it has to do with the add - it and the extension of the conflict, but if so, I don't know which ones, and I don't know how to read the crash reports. I tried the update of Firefox (as well as my Add-ons and plug-ins) several times, but it did not help. And as far as I know, it doesn't seem to be something specific causing accidents. Sometimes, this will happen when I go to a Youtube link, and sometimes it's going to happen when I'm in the middle of reading plain text. And sometimes, when I don't do anything.

    I am currently using Firefox 24.0 on Windows 7 Pro 64 bit. I run malware scans regularly with MBAM and SUPERAntiSpyware, which none have done anything malicious in the recent past. Here is my latest 5 crash reports:

    Crash ID: bp-50ab1ac1-15de-440c-8470-7b74a2141006
    Crash ID: bp-62d19aa7-ac6d-4b37-a917-8c7422141006
    Crash ID: bp-94865f73-d8f6-4dc2-a58e-4e4972141003
    Crash ID: bp-ce3b2a65-ee86-4b1e-88a6-2d8752141001
    Crash ID: bp-6aa03c14-30ab-4b1a-ac82-04ede2140928

    Any help would be greatly appreciated. Thank you!

    Separate the issue;
    Shows details of the system;

    Plug-ins installed

    Adobe Shockwave for Director Netscape plug-in, version 12.1
    Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133

    Having multiple versions of a program can cause problems.

  • Firefox hangs at random times

    Firefox crashes at random times (especially when java or flash is launched), especially after some time
    killing a process plugin-container doesn't release not firefox, firefox trial of murder is the only solution for now
    I have catchy to launch ff console and use ff until is freezes, but no error is printed in the console or in the file wiritted when its freezes ecept standard warns and massages, I used "firefox & > ~ / temp/firefoxcrashlog.log.

    but I have firefox causing g and used until freez and look what I got

    hav0ck@hssm:~$ firefox -g
    GNU gdb (Ubuntu/Linaro 7.4-2012.04-0ubuntu2.1) 7.4-2012.04
    Copyright (C) 2012 Free Software Foundation, Inc.
    License GPLv3+: GNU GPL version 3 or later <" rel="nofollow">http://gnu.org/licenses/gpl.html>
    This is free software: you are free to change and redistribute it.
    There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
    and "show warranty" for details.
    This GDB was configured as "i686-linux-gnu".
    For bug reporting instructions, please see:
    <" rel="nofollow">http://bugs.launchpad.net/gdb-linaro/>...
    Reading symbols from /usr/lib/firefox/firefox...(no debugging symbols found)...done.
    (gdb) start
    Function "main" not defined.
    Make breakpoint pending on future shared library load? (y or [n]) n
    Starting program: /usr/lib/firefox/firefox
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1".
    [New Thread 0xb4132b40 (LWP 6922)]
    [New Thread 0xb3221b40 (LWP 6923)]
    [New Thread 0xb26ffb40 (LWP 6924)]
    [New Thread 0xb1d3ab40 (LWP 6925)]
    [New Thread 0xae4ffb40 (LWP 6938)]
    [New Thread 0x9f3ffb40 (LWP 6939)]
    [Thread 0xae4ffb40 (LWP 6938) exited]
    [Thread 0x9f3ffb40 (LWP 6939) exited]
    [New Thread 0xae4ffb40 (LWP 6940)]
    [New Thread 0x9f3ffb40 (LWP 6941)]
    [New Thread 0xa00fdb40 (LWP 6942)]
    [New Thread 0x90efeb40 (LWP 6949)]
    [New Thread 0x902ffb40 (LWP 6950)]
    [New Thread 0x8fafeb40 (LWP 6951)]
    [New Thread 0x8f2fdb40 (LWP 6952)]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0x8a6e0b40 (LWP 6975)]
    [Thread 0x8fafeb40 (LWP 6951) exited]
    [New Thread 0x8fafeb40 (LWP 6976)]
    [New Thread 0x886ffb40 (LWP 6977)]
    NOTE: child process received `Goodbye', closing down
    [Thread 0x8fafeb40 (LWP 6976) exited]
    [Thread 0x886ffb40 (LWP 6977) exited]
    [New Thread 0x873ffb40 (LWP 6991)]
    [New Thread 0x886ffb40 (LWP 6992)]
    [New Thread 0x8fafeb40 (LWP 6993)]
    [New Thread 0x86efeb40 (LWP 6994)]
    [New Thread 0x85affb40 (LWP 6997)]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [Thread 0x85affb40 (LWP 6997) exited]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0x85affb40 (LWP 7171)]
    [Thread 0xa08feb40 (LWP 6934) exited]
    [New Thread 0xa08feb40 (LWP 7172)]
    [Thread 0xa08feb40 (LWP 7172) exited]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0xa08feb40 (LWP 7210)]
    [New Thread 0x9067cb40 (LWP 7220)]
    [New Thread 0x9e0ccb40 (LWP 7222)]
    [New Thread 0x8ea6fb40 (LWP 7223)]
    [New Thread 0x898ffb40 (LWP 7224)]
    [New Thread 0x898aeb40 (LWP 7226)]
    [New Thread 0x8985db40 (LWP 7229)]
    [Thread 0x918ffb40 (LWP 7219) exited]
    [New Thread 0x918ffb40 (LWP 7251)]
    [New Thread 0x81fb0b40 (LWP 7684)]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [Thread 0x81fb0b40 (LWP 7684) exited]
    [Thread 0x85affb40 (LWP 7171) exited]
    [New Thread 0x85affb40 (LWP 7708)]
    [Thread 0x85affb40 (LWP 7708) exited]
    [New Thread 0x85affb40 (LWP 7714)]
    [New Thread 0x81fb0b40 (LWP 7724)]
    [New Thread 0x8138ab40 (LWP 7729)]
    [Thread 0x81fb0b40 (LWP 7728) exited]
    [New Thread 0x81fb0b40 (LWP 7734)]
    [Thread 0x81fb0b40 (LWP 7734) exited]
    [New Thread 0x81fb0b40 (LWP 7735)]
    [Thread 0x80b89b40 (LWP 7740) exited]
    [New Thread 0x81fb0b40 (LWP 7744)]
    [New Thread 0x80b89b40 (LWP 7745)]
    [Thread 0x80b89b40 (LWP 7751) exited]
    [New Thread 0x80b89b40 (LWP 7753)]
    [New Thread 0x706ffb40 (LWP 7754)]
    [New Thread 0x85affb40 (LWP 7846)]
    NOTE: child process received `Goodbye', closing down
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [Thread 0x706ffb40 (LWP 7844) exited]
    [Thread 0x85affb40 (LWP 7846) exited]
    [Thread 0x80b89b40 (LWP 7845) exited]
    [New Thread 0x80b89b40 (LWP 7911)]
    [Thread 0x80b89b40 (LWP 7911) exited]
    [New Thread 0x80b89b40 (LWP 7912)]
    [New Thread 0x85affb40 (LWP 7913)]
    [Thread 0x85affb40 (LWP 7913) exited]
    [Thread 0x80b89b40 (LWP 7912) exited]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0x80b89b40 (LWP 7917)]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0x85affb40 (LWP 7954)]
    [Thread 0x85affb40 (LWP 7954) exited]
    Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
    [New Thread 0x85affb40 (LWP 7964)]
    [Thread 0x85affb40 (LWP 7964) exited]
    [Thread 0x80b89b40 (LWP 7917) exited]
    [New Thread 0x80b89b40 (LWP 8013)]
    [New Thread 0x85affb40 (LWP 8014)]
    [New Thread 0x706ffb40 (LWP 8015)]
    [Thread 0x706ffb40 (LWP 8015) exited]
    [Thread 0x80b89b40 (LWP 8013) exited]
    [Thread 0x85affb40 (LWP 8014) exited]
    [New Thread 0x85affb40 (LWP 8016)]
    [Thread 0x85affb40 (LWP 8016) exited]
    [New Thread 0x85affb40 (LWP 8018)]
    [New Thread 0x80b89b40 (LWP 8019)]
    [New Thread 0x706ffb40 (LWP 8020)]
    [Thread 0x80b89b40 (LWP 8019) exited]
    [Thread 0x706ffb40 (LWP 8020) exited]
    [Thread 0x85affb40 (LWP 8018) exited]
    NOTE: child process received `Goodbye', closing down
    [Thread 0x81fb0b40 (LWP 7755) exited]
    [New Thread 0x81fb0b40 (LWP 8062)]
    [New Thread 0x81fb0b40 (LWP 8114)]
    [New Thread 0x81fb0b40 (LWP 8151)]
    [Thread 0x81fb0b40 (LWP 8151) exited]
    NOTE: child process received `Goodbye', closing down
    [Thread 0x85affb40 (LWP 8123) exited]
    [New Thread 0x85affb40 (LWP 8158)]
    [New Thread 0x81fb0b40 (LWP 8159)]
    [Thread 0xa00fdb40 (LWP 8113) exited]
    [Thread 0x81fb0b40 (LWP 8159) exited]
    [Thread 0x85affb40 (LWP 8158) exited]
    [New Thread 0x85affb40 (LWP 8167)]
    [New Thread 0x81fb0b40 (LWP 8172)]
    [Thread 0x81fb0b40 (LWP 8172) exited]
    NOTE: child process received `Goodbye', closing down
    [New Thread 0x81fb0b40 (LWP 8175)]
    [New Thread 0xa00fdb40 (LWP 8176)]
    [Thread 0xa00fdb40 (LWP 8176) exited]
    [Thread 0x81fb0b40 (LWP 8175) exited]
    [Thread 0xa08feb40 (LWP 7210) exited]
    [New Thread 0xa00fdb40 (LWP 8190)]
    [New Thread 0xa08feb40 (LWP 8191)]
    [Thread 0x85affb40 (LWP 8167) exited]
    NOTE: child process received `Goodbye', closing down
    [New Thread 0x85affb40 (LWP 8614)]
    [Thread 0x85affb40 (LWP 8614) exited]
    [New Thread 0x85affb40 (LWP 8618)]
    [Thread 0x85affb40 (LWP 8618) exited]
    [New Thread 0x85affb40 (LWP 8619)]
    [Thread 0x85affb40 (LWP 8619) exited]
    [Thread 0x90efeb40 (LWP 6949) exited]
    [Thread 0xa00fdb40 (LWP 8190) exited]
    [New Thread 0xa00fdb40 (LWP 8621)]
    [New Thread 0x90efeb40 (LWP 8622)]
    [New Thread 0x85affb40 (LWP 8623)]
    [New Thread 0x81fb0b40 (LWP 8624)]
    [New Thread 0x6faffb40 (LWP 8626)]
    [Thread 0x6faffb40 (LWP 8626) exited]
    [New Thread 0x699ffb40 (LWP 8627)]
    [Thread 0x699ffb40 (LWP 8627) exited]
    [Thread 0x916ffb40 (LWP 8112) exited]
    [Thread 0x90efeb40 (LWP 8622) exited]
    [Thread 0x81fb0b40 (LWP 8624) exited]
    [New Thread 0x81fb0b40 (LWP 8629)]
    [Thread 0x81fb0b40 (LWP 8629) exited]
    [New Thread 0x81fb0b40 (LWP 8634)]
    [New Thread 0x90efeb40 (LWP 8635)]
    [Thread 0x90efeb40 (LWP 8635) exited]
    [New Thread 0x90efeb40 (LWP 8643)]
    [New Thread 0x916ffb40 (LWP 8662)]
    
    (firefox:6918): libnotify-WARNING **: Failed to connect to proxy
    [New Thread 0x699ffb40 (LWP 8663)]
    [Thread 0x699ffb40 (LWP 8663) exited]
    [Thread 0xa00fdb40 (LWP 8621) exited]
    [New Thread 0xa00fdb40 (LWP 8702)]
    [New Thread 0x699ffb40 (LWP 8703)]
    [Thread 0x699ffb40 (LWP 8703) exited]
    NOTE: child process received `Goodbye', closing down
    [Thread 0xa00fdb40 (LWP 8702) exited]
    [New Thread 0xa00fdb40 (LWP 8737)]
    [New Thread 0x699ffb40 (LWP 8738)]
    [Thread 0x699ffb40 (LWP 8738) exited]
    [New Thread 0x699ffb40 (LWP 8739)]
    [Thread 0x699ffb40 (LWP 8739) exited]
    [Thread 0xa00fdb40 (LWP 8737) exited]
    [Thread 0x81fb0b40 (LWP 8634) exited]
    [New Thread 0x81fb0b40 (LWP 8787)]
    [Thread 0x81fb0b40 (LWP 8787) exited]
    [New Thread 0x81fb0b40 (LWP 8790)]
    [New Thread 0xa00fdb40 (LWP 8791)]
    [Thread 0x81fb0b40 (LWP 8790) exited]
    [New Thread 0x81fb0b40 (LWP 8792)]
    [New Thread 0x699ffb40 (LWP 8793)]
    [New Thread 0x68fffb40 (LWP 8807)]
    [Thread 0x68fffb40 (LWP 8807) exited]
    [Thread 0x699ffb40 (LWP 8793) exited]
    NOTE: child process received `Goodbye', closing down
    [New Thread 0x68fffb40 (LWP 8815)]
    [New Thread 0x699ffb40 (LWP 8816)]
    NOTE: child process received `Goodbye', closing down
    
    Program received signal SIGPIPE, Broken pipe.
    [Switching to Thread 0xb26ffb40 (LWP 6924)]
    0xb7fdd424 in __kernel_vsyscall ()
    (gdb) 

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • iTunes automatically checks all my pieces purchased at random times

    It absolutely makes me in the wall. For some reason I don't understand quite, iTunes checks ALL the songs that I bought in iTunes which seems to be totally random times (but it looks more whenever I do something with iTunes these days, it happened twice this week for example).

    For example, earlier I ripped a new CD in iTunes and I wanted to download on my iPhone, but I got an error message because there is not enough room. Well, as you know, there is not enough place because all of a sudden, every song that I bought on iTunes in the past is now checked, even if I uncheck them the other day because it's the same thing; I don't really know why a check mark appears in front of all these songs. I can't even begin to express how sick I am that. I don't really like wasting my time because the software Apple apparently has a mind all of its own... What could be causing it? I would be really grateful if someone could help with that because it makes me crazy...: \

    This new audit of the slopes unchecked seems to be a bug in the current generation. In some cases, it seems to affect purchases and may be triggered by a timing device.

    The purpose of the check indicator is not primarily to control what is synchronized. It's more than a flag 'ignore this track, unless I deliberately chose to play. The verified status is a poor synchronization control mechanism. The flag can easily be changed by mistake if you accidentally Ctrl + click on a checkbox while trying to select the tracks for other purposes, can prevent play you the content that you are out of your device and don't cut any if you have several devices.

    I recommend that synchronize you with selected playlists. You can make a list of everything you want on the device, or make a list of everything that you want to exclude, and a list of smart playlist which is all in the music that is not in the list of exclusions. The second approach means that new acquisitions are always added to the device without extra effort.

    TT2

  • Equium A300D computer laptop completely shutsdown randomly times

    Equium A300D computer laptop completely shutsdown randomly times
    It could be overheating.
    He really can not cope when you try to restore the i-phone - I was unable to do what the laptop is not long enough
    Reading and / or burning media is also a problem
    Any thoughts on how to fix would be appreciated

    You are right. It may be overheating problem.
    Mobile is also pretty hot when suddenly stops?

    In my opinion you should clean it.

    A friend of mine had the same problem with its A350. After laptop cleaning problem has been resolved. With other words, laptop has been disassembled and cleaned properly.

  • 8.1 Windows hangs at random times on Satellite C50D-A-133

    Hi all

    I had this problem for awhile now.

    I bought a new laptop Toshiba C50D-A-133 with 8.1 Windows pre-installed in December.
    The problem is that Windows 8.1 hangs at random times.

    More frequently, watching a movie in Media Player, listen to music or browsing Web sites.
    The only thing I can do during a freeze, is to move the cursor.

    But I can't click on anything - it does not.
    Time to 'freeze' varies - it may take 30 seconds or even up to 5 minutes.
    After that, he usually "unfreezes" and everything works well again or restart the laptop on its own.
    There are times, I have 3-4 freezes for an hour and there are times that there is only a single gel in eight hours.

    All drivers (graphics, card WiFi, sound card, etc.) are up to date.
    I checked the system for malware and viruses - it wasn't all.
    I have all the Windows updates.

    I don't know, what is the source of this problem?
    It's really annoying.

    I will be grateful for any advice.

    I guess that no one will be able to say exactly what is the source of this gel.

    From my point of view, you should first check if this isn't software related issue.
    In many cases of system problems could lead to as annoying behavior for laptop and this is why I would recommend you to Reset (to recover) the system back to factory settings.

    From my understanding in the case where the gel is related to the problem system, return to factory settings should to fix this

  • Satellite C660-184 freezes at random times while playing a game.

    Laptop freezes at random times while playing Football Manager 2011. The game is not graphics intensive and worked for about a month with no problems, just recently it started to freeze, and the only thing I can do is to turn off my laptop by the power button.

    I have a

    Satellite C660-184
    Windows® 7 Home Premium 64-bit authentic (pre-installed, Toshiba-HDD recovery)
    -Intel® Core i3 - 380 M processor
    SuperMulti DVD + r (Double Layer)
    -RAM (1066 MHZ) DDR3 4096 MB (2048 + 2048)
    -39.6 cm (15.6 ") TruBrite® HD (1366 x 768) high brightness display with LED back light with aspect ratio 16:9
    -Intel HD Graphics, display memory: 1 696 MB

    My graphics driver is up to date, said my last is 28/07/2010.

    I am at a loss to explain what is happening.

    Help and advice would be greatly appreciated.

    Hey Buddy,

    > The game is not graphics intensive and worked for about a month without any problems, has recently started to freeze
    This could mean that the laptop is overheating
    The reason for overheating is the dust that blocks the fan for laptop gets hotter

    I recommend to clean using a jet of compressed air to blow the dust from the cooling fans. You can do it without disassembling the computer so it is very easy and takes only 5 minutes.
    Just remove the battery and unplug the AC adapter before doing this.

    For example I clean my laptop every 4 months because a lot of dust is coming so it s worth it.

Maybe you are looking for

  • cmd + tab

    After the upgrade to Sierra, cmd + tab for switching the app does not work like it used to El Capitan and the previous OS versions. When I select an application using cmd - tab, it just goes to show that the app name in the menu bar, but the window i

  • What does this error mean?

    I received an error message stating this: RobloxStudio cannt open because of a problem. Check with the developer to ensure that RobloxStudio works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the u

  • VERY slow photo - does not load

    I have constant problems with Apple TV.  I have the latest model and the software. Photos will generally display thumbnails of all the pictures, but I can't ever see when selected.  She just a spinning top trying to load them and never stops and it n

  • Add lines - which method is the fastest

    I work with data in data acquisition and I need to add lines. I came up with two methods of getting that and as I work with pretty big blocks of data I wonder which approach is most effective. Thanks for the help.

  • unknown device driver - problem

    I have problems with the installation of 2 drivers. they are listed as unknown device in Device Manager... "The drivers for this device are not installed. (Code 28) » ACPI\VEN_HPQ & DEV_6001 ACPI\HPQ6001 * HPQ6001 ACPI\VEN_ASD & DEV_0001 ACPI\ASD0001