USB connection times

Similar Questions

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• Can I use USB connections and wireless on OfficeJet 6700?

  Only, we have installed a new Prime Minister to 6700 JO e-all-in-one by using the USB, one of our workstations. Is there a reason why we cannot set up wireless also, or do we first abandon the USB connection?

  I love the reliability of USB connection, but I would like to than others in the Office to use the features of the printer/scanner/fax too.

  Hi kreed,

  Yes, you can have the printer connected wireless and USB at the same time. Follow the document below to install the wireless printer. Have a wonderful day.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• Interruption of the USB connection when restarting a computer

  When the computer restarts, two USB DAQ devices are not visible in LV or MAX.

  To get these devices (USB-6210 and cDAQ 9211 with single chassis USB) for you sign up, I need to disconnect and reconnect the.

  Is there a way to get the LV to see devices without physically breaking and the USB connection?

  Carmen,

  It is a problem that we have seen previously, mainly when the OS loads, all the material is detected. In some cases USB devices are detected, but the BONE did not complete its driver loading process, causing a race condition. You are able to recover only when supply you either cycle the USB device or disconnect and reconnect the device.

  I had read the following article which explains how to force windows to delete and detect a USB device.

  http://digital.NI.com/public.nsf/allkb/1D120A90884C25AF862573A700602459

  Then I would create a batch file that runs each time the computer starts.

• use the usb connection or wireless connection?

  I have windows 7 64 bit.  My printer is Photosmart all-in-one model D8110a.  It came with an antenna for the wireless connection. I can't find a place to screw the antnna in. I have a modem to work with band wifi.  Once I've set up wireless can I use my usb on my desktop connection.  I have desktop and I have a mini I - pad. I would like to print from my I - pad and my office.  I do no network, just personal crochet patterns, recipes, etc. Any help would be greatly appreciated.  Thanks, MissPiggie

  MissPiggie

  Hello

  I did some tests about 18 months back to connect printers, USB connection or wireless at the same time with a few computers (only 1 connected via USB) and the tests worked. I can't find the model of your printer, so I can't say more.

  Kind regards.

• HP Deskjet 970Cxi: HP printers - install another driver in Windows 7 to print USB connection cable - PROBLEM

  Hi - I have a HP Elitebook6930P running Windows 7 Ultimate x 64 and a printer HP Deskjet 970Cxi with a USB connection.

  I try to get printing to work.

  There is a 970Cxi pilot in the laptop, but it won't work.

  HP have a support document - "HP printers - installing year Alternate Print Driver in Windows 7 for a USB connection cable" - and I tried to follow this exactly a number of times without success.

  The problem is that it is inaccurate and contains instructions that do not work and refers to procedures that do not exist in Windows 7.

  Therefore, I have no success in the conclusion. I can not communicate with HP for assistance, or no explanation as to why their document will not so blatant.

  Can anyone help please?

  This widget could not be displayed.

• 7520: trying to re-establich HP 7520 USB connection

  I moved and want o connect the computer to the printer. The printer appears offline. The printer also appears greyed out: not active. Why the computer does not recognize the printer on-line. I don't want wi - fi, as I am waiting for a new internet connection after the fact. I need to print some documents.

  Hello @avvocato48,

  Thank you for taking part in the community of HP, I would be happy to help you! I understand that you do not want to reconnect to your HP Photosmart 7520 to the computer running the Windows XP operating system. You want to use a USB connection this time.

  Please go ahead and start here: "offline" Status Message printer is

  Follow the steps listed, although it lists Windows 7, the same steps apply to Windows XP.

  Let me know the results. I look forward to hear from you.

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• Install HP Officejet 5740 & USB connection problems

  I recently bought a HP all-in-one OfficeJet 5740 printer for my desktop Dell XPS 8700-(Windows 8.1) and attempted to install, using the USB connection option. I was informed by the instructions of configuration to go online to a Dell website for the latest version of the installation software to download if I had access to the internet. I have DL'ed software and it apparently installed OK-(aucune erreur ou quoi que ce soit pour indiquer qu'il n'a pas abouti). Once finished with the installation of the software, I got to the window option connection-(wireless, usb cable ethernet cable). I chose the option of usb cable, however after having to then connect the USB cable to the printer and the computer via the usb cable, it tries to connect, but alerted me, stating; "Failed connection to printer, printer was not able to connect successfully via the usb cable. I tried this several times-(par moi-même et remote assist avec Support ordinateur Dell). I had the same problem last week when he tried with my old HP Officejet 6100, which I wanted to replace. I ran the program of doctor printing/scanning HP on the 5740 and it lists the printer and the software installed, however the HP printer install lists assistant the complete software package for the printer is not installed and some basic features drivers may be missing or damaged. Also when I go into Control Panel, then devices/printers, it displays the icon of 5740, however after rt - by clicking on the printer icon, instead of the regular menu that comes up to the top-(showing the complete properties, select this printer as the default printer, etc.), it displays a menu of smaller selections very-little (who don't understand not the "select as default printer"). I tried downloading the printer software two ways-(via the HP website on line 1, and then click the installation CD supplied with the printer, the same results. The printer was purchased 11/15/2014 and seems works very well-(tirages test-page, page d'alignement, etc.), but I can't print anything, and apparently it can not connect via the USB-(* j'ai acheté un nouveau câble usb 2.0 hier et, utilisé pour écarter la possibilité d'avoir un mauvais câble). My Dell computer is only 10 months old, and I upgraded to 8.1 Windows back on 25 October.  The USB ports on the computer all seem to work properly when connected to another USB device other than the 5740 printer.  What is the software apparently is not fully installed, with some missing drivers or, possibly, USB drivers should be updated? Any help would be appreciated. Thank you!!!

  Thanks for responding, but I was able to get the printer installed with the help of diagnostic, remotely in line with my computer manufacturer support staff. He was determined to be a software problem because of a recent update of Windows 8.1. Thanks for the effort!

• Differences in use vs. Canon Pro-10 Wireless USB connected

  To test my new Canon Pro-10 I have connected via the USB port, last night and printed with it.  The Quick Menu was "compliant" with all the bells and whistles that are showing in the 'corner' box  When I printed it gave me a lot of options for quality and the media - various types of paper, including Canon paper and other documents.  Now that I have connected successfully wireless, my paper options are limited to "photo paper" and "plain paper" and the corner box has only a few icons in and I get a message that a driver is missing for the Quick Menu.  I have re-installed Quick Menu on the Canon site and I still get this message.  Impressions, that I got last night via a USB connection were good - a bit dark but good quality.  I had chosen "another matte paper" because it was a brand of third parties.  Today, I used the same paper and printed one of the same images and it was greasy and completely unusable.  I went to Canon paper and print the same image.  It was much better, but way too dark to use.  I can probably modify the image to fix it, but I wouldn't not to...

  VERY pleased with my Canon experience so far - use an Epson for 8 years, thought it was time for an upgrade and I wanted wireless due to constraints of space around my office.  I would not wait for wireless quality photo prints?

  I have three of these printers in this line.  The 9000, 9500 II amd Pro-100.  Not a Pro-10, however.

  They are all printed differently, but after a bit of tinkering with settings, they all did very well.  They are great printers.

  First of all you do not leave the printer defined anything.  Cut each little out of control there.  You can do it with the Canon My Printer the printer settings tab.  Do you know how?  I think, Yes, for the moment, but if you don't come back to me.

  Secondly, you must have your photo editor to manage all settings and corresponding color.  You know how to do this?

  And finally, it is essential that you get some settings on your monitor which corresponds somewhat to the prints.  Your printer can do exactly what you say to do, and you don't know, it's because your monitor is turned off.  If you don't do this step, you can forget the other steps.  However, there are only a few things that must be addressed.  You don't need for any fancy additional modules to do this.  No also added or gadgets, etc.

  But you must get very narrow gray-scale.  You must get very close brightness and you must close contrast.

  Once you do these things, you can make adjustments to your impressions by looking at just your screen.  Because you know that the monitor and printer are on the same level.  Another point, you cannot get a printer to print all colors exactly as you saw.  It is not possible because all the colors and adjustment in effect all the others.  My goal is to get the right tones.  That's what notice more.

  For example, I know that my most recent Pro - 100 tends to print darker than what I see on the screen.  So I automatically know to set it's prints a stop brighter in Photoshop, in my case.  It also prints with a warn a little tone.  Most of the time, with in particular, protraits cela if OK, but sometimes it is not.  In this case I set the 'temp' slightly cooler setting in PS.

  Make sure that you have the correct ICC profile and that you are using Canon brand ink and paper until you get well with the printer.  Very, very important, otherwise you don't know if the printer does exactly what you say it or not.

  In addition, use the USB connection until everything is just right.  You just add another problem when you try to configure printing a nd the wireless at the same time.  As the use of Canon branded products until it is gone.

• m277dw: m277dw scanning network vs usb connections

  I have my new m277dw put in place with a wired network connection.  All right.  The "scan to network" function works well, but it is pretty basic.   for example, no preview, crop, on mode settings flying, etc..  Does anyone know if direct scanning software used with a USB connection has all the extra features?  If so, I could try to add the USB connection on the nearest computer.  BTW, does anyone know if the printer supports a USB connection AND network at the same time the same computer?

  Thank you.

  Hi @botbswco,

  Welcome to the HP Forums!

  I see that you have some questions analysis about the printer HP Laserjet m277dw, on Windows 7. And I'm happy to help you!

  The scanning software would be the same software you use now, if you have changed your USB connection. You could possibly install the printer using the two connections, but it is not recommended, because you can confuse the computer on which connection printer you use. And still will not print correctly. Would you choose manually on the computer, printer, print every time you print. For example, you may have a printer named HP Laserjet m277dw (USB) and the other named m277dw of the HP Laserjet (network).

  If you are looking for different scanning options, you can always try scanning without using HP software and try to use the third-party scanning software instead. Please, consult this guide, scan from Windows 7 without software HP for HP Multifunction printers, for instructions.

  Hope this information is useful and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Mouse USB, connection loss

  I have a HPE170F of desktop running Windows 7 Home.  About a week or two ago I noticed that the USB devices are briefly drop their connections.

  There are a number of ways, it is the case, but the most common is a slight hiccup in my mouse works.  It is even more obvious and boring everything at stake, there will be a break in the mouse works before returning to normal.

  Usually, but not always, accompanyed with the light sensor / on the bottom of the mouse, go to offshore.

  That usually doesn't happen until the program and a computer were aired for a while, and it feels like it is becoming more frequent, more I play, and breaks to lie down in the long term.

  Sometimes I have to disconnect a USB device and plug it back again so that it can work.

  Sometimes, even unplugging / plugging does not work.  Usually when this happens, all USB devices stop working and the computer must be restarted with the power switch.

  I tried several mice in different USB ports (front and rear) with no difference.

  The USB keyboard and a USB drive have similar traits (the player will suddenly disconnect and reconnect).

  I tried with no peripheral USB connected other than the keyboard and mouse.

  I went into Device Manager, removed and hubs USB again detected and disabled the option to allow the computer to turn off the devices.  It made no difference.

  I have run virus scans, auditor system files and verified that everything is up to date.

  Am that I up to this got to be a motherboard problem?

  Thanks in advance.

  Thanks for the suggestion, but it led naturally to a little problem of chickens and eggs.  This HP desktop computer has only USB (wells and firewire) ports, so at some point during the withdrawal of all USB devices, I eventually remove those for the keyboard and mouse, which means of course I have to restart with the power switch.

  I think I can have tracked down the problem, and I think it was a number of things.  I think that my mouse original (the HP base that came with the computer) crumbles.  I don't know why it does this, but my registry contained dozens of entries for my HP mouse (perhaps even one for each time it was unplugged and reconnected).  All entries in mouse are perhaps why the other mice were who have disorders.

  I cleaned the registry and I changed to a mouse of difference and so far I have not seen the problem again.

• U2413, no USB connection, insert an SD card

  The issue seems to be the same as in this link:
  en.Community.Dell.com/.../19629584

  I got the Dell Ultrasharp + X-rite i1 Display Color Calibration work for some time (I use a Dell laptop), but now the calibration SW complains about the connection of the USB cable between the monitor and the computer so I can't start the measurement. I reinstalled the SW DUCC (the Windows 10 Monitor driver, both of the "drivers & download" section of Dell), reset the screen (using the attached link procedure above). I even bought a new USB cable between the computer-screen, but it does not help.

  Please note that the screen works as such by the displayport and the DUCC SW recognizes the measuring instrument real i1 Display, as it says that the device is ready.

  I have been upgraded to Windows 10 since the last time I performed calibration successfully, but as I downloaded and installed the compatible files (see above), it should be ok. SW DUCC did a check for later versions of file and I was prompted to install v1.5.12.18922 | Version of DRX: 2.4.0.1, but the problem remains the same.

  Please advice, I count on this to my ongoing photo project.

  / Benny

  After some reading more, I discovered that someone has managed to solve this problem by inserting an SD card into the slot of the monitor. Magically, this in fact active USB connection between the monitor and the computer. Now everything works normally (i.e. both the SD card is inserted).

  You can close this ticket.

• How can I get updates from HP printer to my C310a if I am not using a router but a USB connection

  See the subject line, it says it all

  You can't really.  Updates are via the web interface, directly to the printer.

  However, the printer will support the USB connection or wireless connection at the same time.  You have a wireless network?

• BlackBerry Blackberry Q5 Q5 undetected in link (USB connected)

  Hi, I have a new blackberry Q5 for 1 week and I used Blackberry Desktop to transfer data from my previous BB Curve 9100. Then I installed the BB link for my BB set Q5 upgraded to the latest OS 10.1 (at the time). Everything worked fine on my Windows 7 Enterprise 64-bit laptop, USB connected.

  Then, today, I wanted to connect my BB Q5 via USB because I got a notification to upgrade to Mac OS 10.2. But when I connect the BB to my laptop USB port, nothing is really happening, even the Windows Device Manager does nothing.

  I tried with 2 different USB cable and same problem. Also, (perhaps another problem), when I connect the USB cable, my BB Q5 tells me "you should use the charger supplied for accusing him faster" (a kind of message)... Even when I connect using the charger provided in the socket...! ? ! (WTF)...

  I've rechecked setting and under the link 'Blackberry' and it is activated: I
  the 'Mobile use network' is disabled, of course I don't want to use the 4G Mobile to connect with link BB and I can see the name of my laptop displays at the bottom of the screen of option 'Link BB' on my BB device.

  But on my laptop, inside the link, it says that the device is not connected as well, under settings, in the storage and access, the USB connection is set to Windows (has been resolved on 'auto' before, but still without success).
  WiFi access is disabled: o
  USB storage device is activated: I

  If my device is not detected in the Link BB software and even not detected as a USB storage device in Windows.

  I uninstalled the Software Desktop BB and BB link, then reinstalled BB link without success... I'm stuck now.

  Any help, thanks.

  I finally got it to work:

  -J' have completely stop my Blackberry Q5 terminal and disconnected from the USB.

  -In Windows Device Manager, I can see the virtual private network of Blackberry in the Group of network adapters, which is correct. But the Terminal Blackberry did not appear.

  -Plug the USB cable into my device Blackberry Q5 and I turned on with the switch on the top.

  -From there, Windows has detected the terminal and installed the drivers from the Terminal Blackberry (automatically supplied with the BB Link software)

  - And link began to say automatically that the BB is correctly connected via USB.

  -When I turn on the USB mass storage, it works as well (and disconnect link at the same time), so I have to stop mass storage USB in BB Q5 settings do connect to Link via the USB cable.