connect to HP Lazerjet 4 L on USB port with cable converter

Similar Questions

• Windows detected new hardware wizard appears each time I try to connect an external hard drive via the USB port.

  Whenever I try to connect an external hard drive into a USB port, Windows detected new hardware wizard will appear. He then not recognize the external drive at all. It does not appear in disk management. In Device Manager, it is listed as a 'device' USB bus controllers not. Under "other devices", there the question mark yellow and says the device is not configured correctly (code 1). External hard drive works fine on other PCs. It's a plug-and-play device. Port and USB cable work fine with other devices. Just this external hard drive has never worked on this PC.

  Hello

  I suggest that you try to remove USB controllers to the clean boot state and control.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  See also:
  http://support.Microsoft.com/kb/310575

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• Via a USB port with a network printer

  Hi all

  I have a peculiar problem.  My company has Win7 and locked our laptops.  Can I install USB printers but not network printers.

  I have a LJ 425 MFD dn, who worked as a champion for the last couple on my network ofyears domestic.

  What I want to know is, if I can now connect to the rear USB port and also use it to print?  The machine will do both?  If this is not the case, can I connect to print, and then sign out and let him return to the networking features or do I have to restore it on the network every time I'm doing this (fixed IP).

  Thanks for any help.

  Jim

  This will depend on how tightly locked down your business is portable.

  To tell you the truth, you should check with your company system admins to see if what you want to do is possible before searching and mucking with equipment of the company.   We recommend that you violate your company computer policy just for the convenience of printing at home.  If its for work, then it can wait until you're on the job to print.  If you have a reason to print at home, then your company should be responsible to provide you with a printing solution that is approved.

  Thing to know is the software that is installed by default by HP.  If your newly guarded work computer running inventory on the applications that are installed you could be marked for a software not authorized by your IT Department.  The only pilot facilities are a little safer, but you will have to rely on 3rd party applications provided by your company in order to avoid stepping on the toes of scanning.

  You say you can install USB printers so we will assume that you are willing to take the risk and the computer is allowed to add printers custom.  You'd have to do is to download and install the drivers/full software solution for your operating system and personal printer.  Locate the drivers and the download page for your printer from here: http://support.printers.com. Once the files on the computer, and then run the installation and perform a normal USB installation according to the steps in the installation wizard.

  A printer can be the USB connection or network connected at the same time.  If there are job never contradictory in the queue of the printer will just print them on a first come, first served.  There should be no need to unplug the printer from the network to print via USB after correct installation.

  Hope that answers your questions.

• EA3500 unable to connect my HP LaserJet P1005 through the usb port on the router

  Hello world

  I just bought an EA3500 router.  I did all the settings, smart intsaller Linksys wifi...

  Now that everything is done, I try to install my printer but it does not work...

  When I try to connect to the ICAS application Cisco VSUB printer, the application tries to connect the printer, but the application is blocked at this stage...

  After you perform a search on the forum, I found that someone have uninstall the printer, reinstall the printer driver and it work for him but not for me...

  If anyone has an idea to me...

  Thanks a lot for you suggestions...

  Benoit

  I think if the VUSB Installer runs through without any problems then you shouldn't have this problem.  I think it would be useful to disable the firewall or any internet security on your computer for the installation to be successful. Do try this and post back here for no results.

• No Audio or USB ports with Port Replicator 3 and Portege R600

  I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

  I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

  A few things to try:

  Reinstall the Toshiba Value Added Package.
  Use system restore to restore Windows to a previous state.
  Check the connector for docking station for damage.
  Back up your data and perform the recovery.

  If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

• USB port with reader of flesh in dosen't work in format ReadyBoost

  Flesh of 4 GB disk used on USB for ready boost on Windows Vista Premium generates this massage: device is connected to an unsupported interface. Ready boost is to boost the prossesing power. I have updated BIOS and run Microsoft Fixit without change. I have no idea what this interface, or what to do about it. Prayer does help. Thanks to this smart one that can help you.

  Hello

  There is a chance that the drive that you want to use is too slow or has a problem of memory even if
  It passes the speed control (many have a quick memory in front of a lot of memory slow and those
  will pass the speed control but will not work correctly). See the end of this message for car
  recommendations.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your thumbdrive (s) or similar.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  =================================================

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
  many of them are or stretching at least the truth. Look at the sides of the player below and buy
  a you know is FAST.

  Don't forget that the readyboost max cache is 4 GB. If your device is more than you can use it to
  storage. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  USB Flash Drive speed - driving tests size
  http://usbspeed.NirSoft.NET/

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• iPod 4th generation not recognized when connected to a USB port.

  Original title: question

  When I connect my ipod 4th generation in the usb port a message out saying that it recognizes not it. I tried everything and it still refuses to recognize my ipod. What should I do?

  Hello

  Check with iPod Support and Forums for more information if necessary.

  -IPod support
  http://www.Apple.com/support/iPod/

  iTunes and iPod Support
  http://www.Apple.com/support/

  Each iPod - iPod help & Technical Support (part 3)
  http://www.EveryiPod.com/iPod-help/index.html

  ---------------------------------------------------------------------

  For most MP3 players that can and will be able to be synced to WMP - iPod syncs not natively for Windows.

  Set the MP3 MTP Mode for WMP sync - mode MSC to treat the MP3 as a reader.
  (Now its set to MSC)<-- this="" is="" for="" mp3="" in="" general="" and="" ipod="" will="" not="" usually="">

  Your MP3 player should have 2 settings - MSC which should allow the player to be used as an external symbol
  drive and PSG that is the parameter to use to sync with WMP. Remove the MP3 and charge it the
  computer. Change the MP3 in MTP mode - it power off and plug it in.

  ======================================

  There is a plugin to let WMP sync music to an iPod:
  http://thewelltemperedcomputer.com/SW/WMP/sync.htm.------

  WinAmp supports iPod
  http://www.Winamp.com/

  How to use Winamp to manage your iPod
  http://www.SimpleHelp.NET/2007/07/07/how-to-use-Winamp-to-manage-your-iPod/

  WinAmp - Forums
  http://forums.Winamp.com/

  6 ways to synchronize your iPod to computer without iTunes
  http://www.MakeUseOf.com/tag/6-ways-sync-iPod-computer-iTunes/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Aspire Switch 10: Keep connect-disconnect keyboard-HARD drive repeatedly while using the usb port

  Hi all
  IAM facing this problem months ago
  It is very disturbing especially iam fan of mouse normal (I hate the touchpad), last week he keeps disconnection/connection too.
  I think that there is a software bug that connect the usb port with usb 3 connecting the keyboard/HDD

  Then
  Please help me.

  update BIOS to the latest version if you have not already:

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_1.08_A_A.zip?acerid=635639807628234039&S...

  Update Firmware on keyboard too if you have not already:

  http://global-download.Acer.com/GDFiles/patch/firmware/Firmware_Acer_D12_W81x86_A.zip?acerid=6355820...

• No access to the personal files of Windows 7 to the disc format hard using a new computer that connects with a USB 2.0 cable to SATA/IDE in Windows 8

  I have a HDD that has been removed from a computer that does not work and I try to access my files staff on it. When the drive is connected, it appears as two items in Explorer: 'system Reserved (f)' and 'disk space (g) '. This drive has been connected to my new computer using a USB 2.0 to SATA/IDE cable.

  I can see all the program files and public folders in the path (g), but not one of my staff, including music, documents, photos, etc.. The path (f) does not seem to access anything whatsoever.

  My new computer using Windows 8, the hard drive, I'm trying to access Windows 7.

  This seems to be a security problem, that I have no idea on how to fix. I tried enabling 'total control' in the tab 'security' in the properties, what has not changed the situation.

  All solutions/advice would be much appreciated.

  Thank you.

  Hi David,

  1. What is the brand and model of the hard drive?

  2. do you get an error message/code?

  3 have you tried to connect the hard drive to a different USB port?

  4 have you tried the search for files by using the search function?

  This problem may be caused by the virus or files might be hidden.

  Method 1:

  Scan the hard drive for viruses:

  Reference:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

  Follow these steps and check:

  a. press the Windows key + X

  b. Select Control Panel and folder options.

  c. in the view tab, select Show hidden files, folders and disks and click on apply and then OK.

  d. check if you can see the files on the hard drive.

  I hope this helps. If the problem persists, you can write to us and we will be happy to help you further.

• iPhone 7 will not play audio via the USB port on the car.

  When I plug my iPhone USB port 7 more in my car (15 Jeep Grand Cherokee), the artist/song/podcast information appears on the screen, but the sound plays through the speakers of the phone.  I have confirmed that my settings are all the same as they were on my 6s, who played without any problems via the USB connection.  Bluetooth streaming works fine - no problems at all.  Any ideas, or is this a problem similar to that people have with CarPlay?

  Welcome to Apple Support communities, kevo.mac!

  Congratulations on your new iPhone 7 more! I see that you connect with your Jeep Grand Cherokee using the USB port. Everything seems to work fine, except that the music plays through the phone instead. I'll be happy to help you to get this working.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  If you are using USB playback

  Restart your iOS device and your car.
  Connect your iOS device to another stereo USB port (if you have one).
  Try another USB cable.
  Update your iOS device.
  Install the updates to the firmware of your car radio.
  Test of audio playback from a different application. If you can not play audio from a specific third party application, contact the developer of the app for help.
  If you can not play audio from an app Apple, contact Apple technical support.

  Enjoy your weekend!

• What the USB port allows for?

  I noticed a USB port on my AppleTV... .but port is mentioned nowhere in the User Guide. It would be wonderful if it could be used, for example, to connect a USB or even an external hard drive with images, which could be displayed on the connected TV.  What this really usable USB port for? Anyone know?

  Thank you

  Tahunga

  You can connect it to a computer to recharge the system software. In the specs, it says "maintenance" or something like. It does not support a file system. Too bad.

• Satellite A200 - USB Ports stopped working

  Hallo, I am DESPERATE for help, please.

  I have a Toshiba laptop Satellite A200 series with 32-bit Windows.

  My USB ports give me major problems.

  I use a USB Internet Modem on multiple computers and it works fine on all computers, including Toshiba.

  A month earlier, Internet USB would suddenly and constantly disconnect itself from the Internet, when I use it in the USB one. When I use USB port two, he recorded no more. The port does not have the device.

  Two USB ports work well when used by other USB products.

  I had always used Internet USB into the USB port, with a cooling for my laptop fan, USB 2 port. Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I did the following:

  1. start an anti-virus
  2 uninstall, re-install and update all the drivers for the USB, chipset famlies, Internet Modem ports, EVERYTHING.
  3. I checked with my Internet provider, the problem lies in my PC, not them.

  I don't know what to do, I'm tired.

  Help, please!

  Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I think that it is a problem of USB power.

  The USB 2.0 port provides 500mA, and in some cases more than USB ports can be connected to the same power supply to the motherboard.
  In case the USB device connected (in your case fan) would need more than 500 ma, it could be that other USB devices do not work correctly.
  I recommend you go to Device Manager and select the properties of USB controller.

  The last "Power Management" tab contains the option to turn off the device to save power.
  This option should NOT be checked. It should be disabled.

  Check it out.

• Re: Satellite S50-B-15F - mouse not working not not on 3.0 or 2.0 USB port

  I have this mouse Steelseries Sensei, who works on all other computers I've tried, but on this laptop, it doesn't.
  Plug into the port 3.0 does not work and plug it into the port 2.0 makes this kind of work but skips working for seconds and after 20 seconds, it stops working at all. This is a new laptop with windows 8.1.
  The mouse is supposed to be plug-and-play like all software runs on the mouse itself.

  These are things I've tried:
  -Installation of the drivers. The mouse is not recognized.
  -Flashing new firmware with utility Steelseries. It crashes at halfway through leaving the mouse unusable. The flash of the firmware can be done on other PCs
  -Adjustment of the power load 1.5 turned on in the bios.
  -Eco mode off.
  -Disabling usb selective suspend setting in advanced power options
  the mouse still does not work

  I just discovered the mouse works fine on the laptop connected via a usb hub 2.0 in 2.0 or 3.0 port, if it is not a great solution

  Just a question at the beginning: you tested the functionality of USB ports with other USB devices?
  Are any other external devices such as USB keys or mobile phone connected correctly recognized?