USB\VID_0483 & PID_5740 - peripheral unknown

Similar Questions

• USB device not recognized. unknown device

  USB device not recognized, peripheral unknown.  I can not connect any USB

  If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

  General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

  MS - MVP - Elephant Boy computers - don't panic!

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• GANYMEDE + peripheral unknown network or Client AAA package

  Hi all

  I can do connect using the set of credentials to the ACS server, log it showed:

  "Reason for failure: 13017 receipt GANYMEDE + peripheral unknown network or Client AAA package."

  I know there are a few changes on GANYMEDE + room for new catalyst IOS, so I consult the guide and it is the end of my config:

  AAA server Ganymede group + TAC_PLUS

  the AUTH server name

  RADIUS server AUTH

  ipv4 10.10.21.251 address

  key xxxxxx

  AAA TAC_PLUS authentication connection group Ganymede + local line

  TAC_PLUS AAA authorization exec group Ganymede + none

  AAA authorization commands 15 default authenticated if

  accounting AAA periodic update 1

  exec accounting AAA TAC_PLUS start-stop group Ganymede +.

  network accounting AAA TAC_PLUS start-stop group Ganymede +.

  connect accounting AAA TAC_PLUS start-stop group Ganymede +.

  My platform is

  -C6500 running on IOS 12.2 (33) SXJ1

  -ACS 5.2.0.26

  Need advice on this subject, thanks

  Noel

  Hello

  What is IP IOS appropriate set to network devices and the AAA Clients for the candidate countries? If Yes, what IP address is indicated on the failure of the ACS that includes the error "GANYMEDE + unknown cover peripheral network or Client AAA? ACS reports as unknown IP address when it is already set appropriately?

  Kind regards.

• USB and DVD not recognize anything it shows that peripheral unknown.

  Original title: USD/DVD does not work.

  my USB and DVD does not recognize anything, it shows device unknown and does not work.

  Hi alexandrebernat,

  You did it all change hardware or software on your computer before this problem?

  For the question USB, you can follow this link & check if it helps.

  USB port may stop working after you remove or insert a USB device

  Reference: Troubleshooting tips advanced to General problems USB in Windows XP

  For the CD/DVD drive problem, you can follow this & check if it helps.

  Your CD or DVD drive cannot read or write media

  Reference: How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.
  Please post back and we do know.

• drive hard formatiado como memoria y conectado don't con useful usb, computadora no reconose el device, peripheral unknown port of codigo 43 usb

  El hard drive are model mja2160bh con SER. Nr. k49nta12tueh're laptpt toshiba, works probado en otra computadora UN

  Look at the entire Web page

  

  Look in the lower left corner of the page.

  

  Where we see English, click on it.

  Then select your language from the list.

  

  OR

  http://support.Microsoft.com/common/international.aspx

• Portege R700 - peripheral unknown in hardware

  Hello

  Win 7 Pro, after installation clean (I installed all the drivers Toshiba again), I have 2 unrecognized currencies left.

  1 a:
  AuthenTec Inc. AES1660
  Location: Port_ #0002.Hub_ #0003

  It works fine, but no driver is shown and it is not recognized by windows.
  Yes, I installed drivers for the fingerprint and Touchpad.

  2 a: unknown device
  Other devices
  on system compatible ACPI Microsoft
  The drivers for this device are not installed. (Code 28)

  Details: ACPI\TOS6205
  * TOS6205

  Any ideas? Thank you!

  The first should be fingerprint sensor and a second module BT. If you have installed BT stack installation activate BT (FN + F8) to complete the installation of the BT module.

  To be honest I n don't know what is wrong you but here's the Win7 installation order. All the things listed must be installed in this order:

  Win 7
  USB3.0 Driver 1.0.20.1
  Driver USB-Serial 1,00,000
  TOSHIBA Assist 4.00.00
  Security TOSHIBA Assist 2.0.8
  TOSHIBA Bulletin Board 1.6.08.0
  TOSHIBA ReelTime 1.6.06.0
  Infineon TPM software professional v3.60.2071.00
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.00.40.1215
  Intel AMT 6.00.40.1215 software
  Driver Intel 8.15.10.2125
  Driver Intel Rapid Storage Technology 9.6.1.1001
  Realtek Audio Driver 6.0.1.6083
  Driver Intel LAN 14.8.3.6
  Synaptics Touch Pad Driver 15.0.12
  TOSHIBA value added package 1.3.12_64
  Ricoh 2.08.03.04 card reader
  Wireless LAN driver
  ConfigFree 8.0.30
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
  TOSHIBA Fingerprint Utility 1.0.2.27
  TOSHIBA Web Camera Application V1.1.2.13
  3.1.3 TOSHIBA face recognition
  Bluetooth Stack for Windows by Toshiba
  TOSHIBA eco Utility 1.2.12.64
  TOSHIBA HDD_SSD 3.1.64.6 attention
  TOSHIBA HDD Protection 2.2.0.4
  TOSHIBA Service Station 2.1.40
  TOSHIBA PC Health Monitor 1.6.2.64
  TOSHIBA Sleep 1.4.1.3 utility
  TOSHIBA Disc Creator 2.1.0.2 for x 64
  TOSHIBA Media Controller 1.0.80.7
  TOSHIBA Media Controller plugin 1.0.5.10
  UPDATE2 PCIIDEREG - 1.1
  Update3 FixFPService_REG_1.0
  Update4 TosVolRegulator_x64_1.1

• Re: Satellite L300 - peripheral unknown in Device Manager

  Hello

  Satellite L300 OS - Vista 32

  I installed again software to use the USB port to connect the Council and this Council during this installation program that some things went wrong and all my USB port does not not or does do not at all...

  When I checked the Device Manager it shows like any other device-> unknown device...

  I have install the Toshiba download chipset and still I can t solve the prob...

  my USB all the port does not...
  My WiFi is not working...
  my camera does not work...

  rest of all work, I guess that any suggestion to solve this problem?

  Hello

  Would it be possible that the 3rd party software that you have installed to use the USB ports has tangled up the whole system?

  The driver for the unknown device that appear in Device Manager can be identified very easily.

  I recommend this HowTo:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  You have the Vendor ID and the device ID and the use of these two IDS in pci database would help you to find the right driver.

  By the way: If your Wlan and cam n t work, install the drivers matrix, you've already tried this?

• Satellite A200-1The - peripheral unknown in Device Manager

  I have the suite listed under question marks in my device manager:

  ? Multimedia controller
  ? Network controller
  ? Unknown device

  I installed the sound and it works
  I installed the network card and it works

  What are the above devices?

  Stand by. Which operating system you are trying to configure?

  Have you checked on the Toshiba download section if the installations Instructions document is available? If you follow this document you will install everything you need and everything will be OK.
  Anyway, multimedia controller can be peripheral multicard reader, network controller is probably wireless card. I can't say what unknown device because I know not what drivers you have installed.

• HP Envy 15-J104el: Periferiche sconosciute knew HP Envy 15-j104el - peripheral unknown

  English:
  These are the unknown devices:
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG

  I have Windows 64 bit Pro 8.1 and connected to my laptop it is just a USB hub, a mouse and a keyboard that works perfectly

  Italian:
  Salvo sewn questo post in merito ad a problema del mio HP Envy 15 - j104el, this sound system 2 periferiche sconosciute ed una che funziona not correctly, ecco uno che screenshot makes meglio Torino
  http://brain89.altervista.org/Periferiche_sconosciute_HP_Envy.PNG
  You can help a risolvere?
  Ho 8.1 Windows Pro 64 bit e periferiche pc sono hotels al con UN hub mouse e una tastiera perfettamente rilevati e funzionanti.

  Hello @Matrix89,

  Thanks for the quick response!

  Try to review the following resource and let me know if you have a bit of luck:

  How to find drivers for unknown in Device Manager devices (Not a HP website supported).

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Portege A600 - peripheral unknown after Windows 7 installation

  All the g ' Day.

  I've got an A600 (original Vista) I recently installed Windows 7 Professional 32-bit (reformat/reinstall). I was careful with the installation order. All right except the built-in camera does not work and there is managing an unknown controller PCI Communications Simple in the device. Without a doubt, the two are linked.

  I tried to reload the drivers for the chipset without result. The unknown device is bus PCI 0, device 3, function 0. Is it possible to determine what this device is so I can find the missing driver?

  Hey Buddy,

  Can you post the vendor and the device of this unknown device ID? It would be useful to identify it.
  => [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  But the PCI communication controller could mean the webcam in your case I would try to install the driver for the webcam of the official website of Toshiba. After installation, you should be able to start the webcam software, and use the webcam.

• Install Win 2000 on Tecra S2 - peripheral unknown

  Hello

  I try to install win 2 k on my Tecra S2.
  I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.

  I try to check all devices such as:
  -Modem
  -Lan card
  -Wireless network card
  -Card bus
  -Audio

  etc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)

  I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.

  Please can someone help, please

  The only solution for you to find your way through this download one
  Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.html

  This program will allow you to easily locate the correct device description as well as the
  pilot coresponding.

  Hope this will sort things

  Concerning

  chain

• Equium L10: Windows Vista Beta2 - peripheral unknown

  Hello

  I have a Toshiba Equium L10 with Windows XP loaded as default but I installed VISTA Beta2 "public dissemination" on this issue and because it is only 1.5 GHz Celeron CPU with 512 MB of RAM, it worked fine, but I have a problem that I hope I can get help with users in this forum, and especially those who have the same or similar Equium model as I have?

  Okay, after VISTA installation, I checked in the Device Manager and noticed "unknown device". After checking the info given in its properties, I've detailed below:

  Geographical area: ACPI Microsoft compatible controller built-in
  Value: ACPI\ACPI 0001 * ACPI0002

  When I reinstalled XP again, I went to the Manager of devices/batteries/Microsoft SMART Battery, the entry for Microsoft SMART Battery subsystem 'ACPI\ACPI0002\6 & 28CA 2229 & 0'.

  Notice the "ACPI0002" info given for the "unknown device" in VISTA is the same info given for "Microsoft SMART Battery subsystem" in Windows XP. So I'm left wondering if the unknown device Vista is Microsoft SMART battery subsystem and if yes, why VISTA installed the driver for it?

  Can someone help to find a driver for the "unknown device" in VISTA?

  Concerning
  Brave

  Hello

  The unknown device appears because the driver is missing.
  Unfortunately, at this time you will not find any what Toshiba supported drivers for Beta 2 of Windows. It is a beta and not official version on the market.
  I think that if this OS will be official, supported so you will also find the necessary drivers.

• Re: Satelite Pro - 1 5 - C850 peripheral unknown - ACPI\TOS6205

  Hey people,

  I bought a "new" satellite pro c850 - 1 d 5.
  It came with win8 (pooooh) and I installed 32 bit win7 with all ms updates and toshi.
  everything works fine - until a little thing:

  unknown device - ACPI\TOS6205
  help Google and I found that it should be the 'cpu to pci bridge'.
  on another site was recommended to install the toshi driver "tc00474200k.exe".

  tadaaaa: bluescreen ;-)

  restore the last working config, ok.

  and now? advice or a suggestion?

  thxsalot
  Mike

  This unknown device is bluetooth laptop adapter. You can download the right driver from http://aps2.toshiba-tro.de/bluetooth/

  Check it out.

• Satellite L500D - peripheral unknown listed in Device Manager

  Hello world

  I have a Satellite L500D and in other devices under Device Manager, I have unknown device listed. I installed all the drives listed on the Toshiba page without success, anyone had this before and if so please can you me how to fix it.

  Can you please tell us what OS you are using?

  Anyway, how to identify an unknown device in Device Manager, you can read here
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Please, check and send comments.