USB WD My passport not recognized

Similar Questions

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• SanDisk Cruzer Mini 512 MB USB Flash Drive is not recognized on Windows 7

  When I plug my USB drive inside fails to update the driver. Is there anyway that I can download the driver manually?

  Hello

  You meet other USB problems on this system. The Cruzer works on other computers?

  Check with SanDisk support because they have excellent online support, including live Chat and documentation.

  SanDisk - Support
  http://KB.SanDisk.com/app/home

  See also the appropriate bodies of SanDisk:

  SanDisk - Forums
  http://www.SanDisk.com/SanDisk-support/forums

  Cruzer not recognized by the PC
  http://KB.SanDisk.com/app/answers/detail/A_ID/10/kW/Cruzer/r_id/101834

  ===========================================================

  Other troubleshooting methods:

  1 reboot to be sure nothing blocks the ports.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connected to the Portege 3500 USB DVD burner is not recognized correctly

  I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

  Hello

  Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

• HP TouchSmart 600: External Toshiba USB 3.0 drive not recognized on HP Touchsmart

  I have a desktop HP Touchsmart 600, and I bought a 1 to Toshiba external USB 3.0 drive and when it plug to the USB port, it does not, even tried the other port and restarted, but does not yet recognize, I tried to reload the USB Chipset, but no cigar. I am able to use it on my Sony laptop. I would be grateful for any help or suggestion. Thank you people.

  Hi @StevieB1,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the external drive not being seen. I'll be happy to help you.

  Please, try the steps in Troubleshooting connections USB (Windows 7).

  I hope this helps. Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Hard drive WD Passport not recognized.

  I dropped my external hard drive and now it is not recognized.

  It can be broken.

  If she does not turn when you plug it in, buy a new one.

  And try it in another computer

  See you soon.

  Mick Murphy - Microsoft partner

• WD Passport not recognized under XP.

  My XP SP3 has ceased to recognize my WD passport. I have it plugged into another computer running the same operating system and he showed fine. So what's my problem?

  Hey racerokc. First back up the data that is on the drive so you can connect it to another device. Then after following the advice of PML, if she does not turn out to be a bad USB port, you can try setting the reader a new letter. Here you can see how to do this on different versions of Windows: http://wdc.custhelp.com/app/answers/detail/a_id/137

  If this help not be you can try reinstalling the drivers for the HARD disk. If none of this helps you can contact support WD here: http://support.wdc.com/contact/index.asp?wdc_lang=en

  Hope that helps. Let me know if you have any questions.

  Boogieman_WD

• WD My Passport not recognized as drive external HARD on windows 7

  Hello

  I would like to ask if anyone has experienced this and how the address the issue:

  I just bought a WD My Passport Ultra 1 TB and tested on two devices (desktop to Win7 ultimate) and portable Win7 Pro. At first I used it on my desk and it it detected as required WDC but subsequently using the router as its update driver.

  -J' checked the Disk Manager, and he's not here.

  -J' checked Device Manager, it is detected as "Internet access server" (maybe the reason a router driver has been used).

  -J' tried to uninstall the server "Internet access" and restart the system to flush it out

  -The Office again the HDD detected as "Internet access server.

  -J' checked BIOS and it is clearly detected as external WD HARD drive

  After all this I tried on the laptop. No problem and did a reformat of the hard drive so that it can be detected as a disk of expenses by the office. Still no luck.

  Hope someone can help me here.

  Thank you

  Perry

  Hi Perry,

  First of all, check Device Manager to see if the WD hard drive status.
  Right-click on the device and click Properties to check the status of the device.

  Try to connect the WD Passport to another USB port.

  Kindly, follow these methods and check if that helps.
  Method 1:
  Try the Fixit from Microsoft Hardware:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us?WA=wsignin1.0

  
  Method 2:
  If this does not help, try to rescan the disks in disk management.
  a. right click "my computer".
  b. click 'manage '.
  c. Select 'disk management '.
  d. click Actions and click 'analyze disk '.
  e. find your player in the list in the lower pane. Right click and select "Initialize" and "Add partition".

  Method 3:
  If none of the steps help, then remove and reinstall USB controllers.
  a. disconnect all USB devices except the keyboard and mouse.
  b. click on the Start button.
  c. type devmgmt.msc and press ENTER.
  d. in the Manager device scroll down to USB controllers.
  e. right click each one, one at a time and click Uninstall.
  f. restart your computer now, each USB port is reinstalled.

  Now test the question.

  Let us know if it helps. If the issue persits, we will be happy to help you.

• DONGLE USB DVB - T is not recognized after 5 minutes of use.

  mo_941

  Hello Lady/sir

  I'm mo_941.

  I have a problem with my laptop

  Information for PC: computer toshiba laptop

  Model name: Satellite M115 S3094

  OS version: Microsoft Windows XP Professional 5.1.2600 Service Pack 3

  When I installed the device (DVB - T USB DONGLE) brand Q.best model No: M300S and software to watch TV blazevideo 6 I can watch Tv and I have no problem. But after 5 minutes, all disappeared and the Device Manager may not regcognize my device. How can you help me?

  Moreover, before everything is gone I see in Device Manager in the bus section series universal part controllers usb root hub changes to the composite usb device but after 5 minutes, it turns into unknowm apparatus

  Hi mo_941,

  1. Did you the latest changes on the computer?
  2. How do you get running again after that it disconnects?

  I suggest that you uninstall and reinstall all the computer USB controllers and check to see if it helps.

  1. Click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  2. Click the hardware tab.
  3. Click the Device Manager button.
  4. Expand Bus USB controllers.
  5. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  6. Restart the computer and reinstall the USB controllers.

  Check if the problem persists.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• (Redirected) usb 3.0 does not (recognized) in windows 8.1 (inspiron 15R 5521)

  Hello

  I have dell inspiron 15R 5521 touch screen core i7

  I used windows 8 before and it was working fine but I installed windows 8.1 a few weeks ago, everything works well except the usb 3.0 port. System does not recognize the ports. When I move all USB device like mobile it begin to charge the phone but not connect as it should be, but on the other hand, it works fine with usb 2.0 ports. I have attached the screen shot of the Device Manager please let me know the solution if one of you knows that.

  Thank you

  

  desiredproject7

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• USB 2.0 drives not recognized since the latest Windows updates

  I tried 4 different USB 2.0 on 4 different and no computers drives won't recognize readers for the latest Automatic updates.

  1 PC with Win 7 64-bit all service packs

  2 computer laptop w / Win 7 32 bit all service packs

  3 laptop w / Win 7 64-bit all service packs

  4 desktop w / Win XP Pro 32 bit all service packs

  All versions are professional, all devices are fully patched and recognise the mouse USB, HD', other USB devices.

  3 of the flash drives are Sandisk Ultra USB 16 GB sticks, one is nine of its packaging.

  1 is a 8 GB generic to Symantec given as a promo, but it is brand new.

  All these discs worked in these devices before the last major thrust of update.

  There is no splat / exclamations in the Device Manager.

  If all the USB controllers are removed and reinstalled, it does not address the issue.

  Difficulty of MS it detects no problem.

  USB 1.0 drives work!

  None of these devices are equipped with USB 3.0 ports

  Hi Laurence,.

  Please keep us updated on the status of the issue and apologize for the lack of communication.

  As you mentioned that this problem occurred after installing Windows updates, then I would suggest you to restore your computer to a restore point that was created before the date and time when you started to notice the problem.

  To do this, please follow the steps from the following link:

  Restore system files and settings

  Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  After restoring the system, try to manually install the Windows updates (try to install one by one) to identify what update caused this problem.

  To do this, please follow the steps from the following link:

  Install Windows updates in Windows 7

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• Satellite T110 - powered by USB CD/DVD drive not recognized in BIOS

  I have the T110, I can create recovery disks in Windows but when I restart the computer and press F12 it shows no CD/DVD drive in the BIOS.

  So I can't restore to start or boot from external CD/DVD drive.

  Help!

  Hey,.

  I n t have the laptop in front of me but check the BIOS if you can find an option called USB legacy support. If Yes, you need to activate this feature that your laptop can recognize the external hard drive.

  You can boot from a USB? I mean that you can also create files recovery on a USB key, so it would also be an option to restore factory settings.

• My external USB hard drive was not recognized. Difficulty?

  The subject line says all this.

  It is important that I have access to the XHDD. That I am I missing that will make this happen via a USB connection?

  Ok. When you connect your XHDD for the WinXP, you should be able to see it using the workstation.

  You should also see an icon and icons for your CD-ROM, disk, nextwork and speaker in the lower corner of the WS7 similar to the following.

  Right-click on the icon XHDD next to the "speaker" icon and select Connect (disconnect from the host) for you disconnect from your XHDD of the host (WinXP) and connet to the virtual machine (WS7). You can also right-click on the icon and disconnect (connect to the host) to return the XHDD to the WinXP.

  I hope this helps.

  -Allocation of points if you think it is 'Useful' or 'Correct '.

• Equium A60 - Generic not recognized USB Hub

  Equium A60, XP Home Edition SP3.

  My Tevion USB 2.0 combo card reader is reported as being a USB device fails, is not recognized and implemented in the device as an unknown device manager.

  Here's the riddle:
  When I plug it into the same old PC under XP Pro SP3, it is recognized and works.
  When I plug it into a new PC running Vista Home Premium, it is recognized and works

  And finally, and especially:
  When I plug a USB 1 Hub 4 ports on the A60 Equium and then plug the Tevion USB2.0 card reader this Tevion card is recognized and works. There are a lot of bleating like a lost sheep on the run faster if connected to a USB 2 port, but if I plug it directly into the port from Toshiba it does not at all.

  Any ideas to solve this problem or similar experiences?

  Wizzer

  Is the gap of 4-port hub powered by the USB port of your satellite or is it a KVM?

  If self-powered it s then it s obviously needs a lot of power combo card reader which can be provided by all of your computers, but not the satellite.

  It is a theory that might make sense... :)

  Welcome them

• DCR-TRV460 USB connection not recognized

  Connection USB DCR-TRV460 is not recognized by Windows 7 Home Premium.

  According to Sony, it is not supported and no downloads are available.

  My daughter was married last week. His entire marriage is recorded on the tape in the camcorder above. Not realizing there is a problem downloading the pictures stored in the computer, I'm mortified loss. I expect to transfer, edit, and create several DVDs for the family.

  Please, can someone help me with a solution to this problem? I'm desperate!

  Thank you for your message.
  The DCR-TRV460, unfortunately, is not compatible with the windows operating system 7. If you used a stick of memory to record the video, then you can just insert the memory stick on your computer. Assuming that you used the Ribbon, your other option is to connect the camcorder to a compatible PC and transfer the video files to a memory stick or CD. You can download the files on your own pc to edit and make more copies. I suggest to use the memory stick in the camera so that you can easily download files on your home pc