using ide hd SATA?

Similar Questions

• Should I use IDE or a SATA HDD in a Satellite A30 303

  Hi there, I was wondering what HARD drive I can get for my laptop A30-303 because the old is dying today being a machine for 4 years, so I would like to upgrade. Y at - it a maximum size of the machine, or I can put in any size of HARD drive?

  Also the HARD disk doesn't have an IDE or SATA interface?

  Hello

  As far as I remember the Satellite A30-303 PSA30E series came with a 60 GB 4200 RPM HARD drive.
  The laptop supports the Enhanced IDE (ATA-5). This means that you need to use the HARD drive that supports an IDE interface!

  But note; not all HARD drive sizes are supported. There is a BIOS HARD disk size limitation.
  I'm not sure on the compatible HARD disk sizes but in my opinion, you should be able to use 80 GB, 100 GB of maybe too.

  Best regards

• Can I start a PowerMac G4 733 Mhz 'QuickSilver' 2001 of a 128 GB SSD connented to use a PCI SATA card?

  HELLO, my name is Francesco and I have a PowerMac G4 733 Mhz "QuickSilver" since 2001. Inside of it, I have two IDE hard disks and I want to upgrade to a 128 GB SSD. The problem is that: the G4 only has not connectors SATA, so if I install a PCI SATA can I boot OS X 10.4.11 her? Can someone suggest me a specific type of PCI SATA card to use?

  Thank you very much

  Fancesco

  Hi Francois,.

  Some PCI SATA cards are not bootable, you have a link to the one you had or have decided to do?

  While not as fast as a SATA card, a szimple adapter can be an option...

  http://www.eBay.com/ITM/2-in-1-SATA-to-IDE-HDD-IDE-to-SATA-serial-ATA-100-133-ad apter-converter-cable-/ 381394886475

• IDE to SATA

  I bought an adapter IDE to SATA so trying to use one of my PATA133 of Maxtor HARD drive on my new Inspiron 530 which only has SATA connections.  I searched the forums and see that it is a common recommendation for this situation.  In my situation, it does not work.  The device does not appear on the system and if I go to the startup configuration, the SATA 4 and 5 positions of show .  I know that this may be a problem with the adapter, but I was wondering if there is a Vista driver I need to install or a setting I have to change to enable the SATA 4 and 5 connections or whatever it is in the same direction.

  
  

• Satellite A210-103: drive hard IDE or SATA controller?

  I can't find any information in the user manual what type of disk controller internal A210-103 has: IDE or SATA.

  I discovered that it is an IDE controller. No chance to change the hard drive in an ssd.

• IDE or sata

  I have a Compaq nc6220 laptop and want to know is the DVD, an ide or sata drive?

  Bay slim 9.5 mm with IDE connector...

• IdeaPad Y560 dvd drive ide or sata?

  Is Y560 dvd drive ide or sata? I want to replace it with a hard drive so I need an IDE HDD is ide?

  _Aurora_ wrote:
  Thank you very much for the answer BUT, I took out the DVD player and its connection to the motherboard does not resemble regular connection of HDD at all.

  Hello

  All connectors/ports sata may not look the same but will serve as the data transfers. The Sata ports are different for different devices, for example the odd and HDD.

  You can see the attached picture in the spoilers below.

  Link to photo

  This a port hard drive

  Link to photo

  I hope you get now why the odd port and the port of hard drive are different.

  Concerning

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

• Adding to use a PCI SATA for Inspiron 3847

  I used all 4 of my SATA ports and want to put all my HARD drives on a controller SATA card and use the onboard SATA connectors for my SSD. I had also a map to the office laying around so I jumped it however windows 10 didn't saw that he logged in the Device Manager. The BIOS supports by adding a card to allow for more SATA drives?

  If they had to do a review of material to work with Win 10, then I guess you have your answer. Your card is not compatible with Win 10.

  Not much you can do except get a compatible card Win 10...

• I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

  Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

  Hello

  Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

  WARNING: Unable to verify timestamp for ewusbwwan.sys
  ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
  Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

  ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
  or a device attached to it.

  BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

  WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
  Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

  c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

  This driver update.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  ========================================================

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and drivers of separate devices (see methods of updating driver below).

  BiosVersion = F.03
  BiosReleaseDate = 07/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = PC HP Pavilion Sleekbook 14
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087F1000003B5900000310100
  SystemSKU = C0P30PA #ACJ
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 18F9
  BaseBoardVersion = 82,12

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• drive hard dv1375EA (Pavilion DV1000 series): IDE or SATA?

  Hello

  Could anyone who has accurate knowledge let me know DV1375EA has a drive hard IDE or SATA, so I need to get a replacement (not not jumped the laptop cover again, so to speak). I think it's IDE, but I assure you.

  Thank you!

  It is the IDE.

  I hope this helps.

  Pete

• Hard drive upgrade from IDE to SATA for Precision 360

  Hi all

  I need help.  I have a Dell Precision 360 with two hard 40 GB IDE disks.  I would like to move to a WD Caviar 640 GB hard drive and throw the other two.  The WD hard drive is a SATA connection.  I'm sure I need to purchase a controller card, but I don't know what kind to get.

  I've read other messages concerning an upper limit of 137 GB, but I think that referred to as prior to Windows XP Sp2.  I also read that do not mix disks hard IDE and SATA hard drives, DVD IDE burners mix with SATA drives?  Any advice would be greatly appreciated for this kind of upgrade.

  Thanks in advance,

  Feliuscat

  Precision 360

  Intel Pentium 4 2.8 Ghz 3 GB Ram

  Windows XP SP2.0

  nVidia Quadro FX 500

  21 in. Dell Sony Triitron CRT monitor

  
  

• Equium M50-235: IDE or SATA HDD?

  Does anyone know if the Toshiba M50-235 using an IDE or a SATA hard drive?

  Thank you!

  Hello

  I can confirm the information. The HARD drive has an enhanced IDE (ATA-6) interface and you can also us ea 60 GB HARD drive

  Good bye

• Windows problem with hard drive changed from IDE to SATA connection.

  After a full rebuild (new MB, CPU, graphics and RAM) and install the new copy of Windows 7 Home, everything is great, until I try to connect an additional internal HDD. The boot and then crashes to the windows logo. Additional HARD drive is SATA, but it has already been used on an IDE connection.

  The bios recognizes the drive, but obviously, there's some kind of conflict in Windows (I think the reader can contain a backup of the previous generation system).

  System;

  MB ASUS M5A97 R2.0

  CPU AMD FX6

  Gskill 8 GB of RAM.

  Any ideas on how to fix the problem please?

  Thanks, Chris

  Usually means a player has failed/problematic

  You say sata drive but used on a connector IDE does that mean you are using a cable converter, because the type of interface is completely different, or do you just mean the parameter for the connection of the bios?

• Want to use AHCI with SATA SSD on tiny 1000 (1151NR)

  Hello

  I have a Mini 1000 (1151NR - embedded Verizon 3G model of modem).

  HP product number is: NM123UA #ABA

  I recently installed an SSD, and I hope that I can switch the mode of the IDE in AHCI mode to improve performance.  I tried to use the instructions in this thread - http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/SATA-drivers-for-XP-solution-on-0x000000...

  However, once the Windows installation starts at the top, nor the F6 option for drivers or the automatic detection of storage provides an option to use the SATA/AHCI drivers.

  I am aware that the BIOS for this product does not have a SATA option, but I hope that there is always a way to allow this, because I know that the Intel chipset is able to support the SATA AHCI.

  Can someone tell me if this is possible (or, Alternatively, certainly not possible)?

  Thank you

  John

  If the XP installation does not have a hard drive, then the AHCI is enabled in the bios.

• How to connect an IDE and SATA drive on my computer

  I run windows XP Pro on my computer, it's a Sata hard drive, I also have to plug an IDE drive, but also a return to the top. Whenever I put the disc in, my computer can not see a reason any. Please help an old man if you would.

  Thanks in advance for any help

  Richard, welcome to the forum.

  Here are the manuals for the computer:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual&lang=en&cc=us&docIndexId=64180&TaskID=101&prodTypeId=12454&prodSeriesId=410112

  On the Service reference Guide, 3rd edition, P. 59 it states the following: "HP does not support hard drives PATA (IDE) when the SATA drives are installed on the computer.

  If your problem is solved, please click "accept as a Solution.