Using the HP OfficeJet CM1312nfi Solution Center

Similar Questions

• OfficeJet 4500 all-in-One Printer G510h - can't scan using the printer or HP Solution Center

  When I tried scanning document/image of my desktop with the use of the HP Solution Center, by pressing the button scan, printer/scanner does not react but simply go back to the home menu. I've tried a few things: reinstall the printer driver, restart the computer, unplug and turn on the printer, but it's the same thing happens again.  When I tried to scan the document/image directly from the printer/scanner, the following error message appears on the HP Solution Center:

  "An error has occurred with the HP scanning application. Try the following steps after each step, try to scan the image.
  -Restart the program
  -Restart the computer
  -Reinstall the HP Photosmart software that came with the device. »

  However, there is no HP Photosmart software supplied with the unit.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  Click START > computer > C: > Program files > HP > Digital Imaging > Bin > right click on hpscnapp.exe, and then click SEND TO OFFICE.

  Back on the desktop, and then double-click the shortcut icon hpscnapp.exe , he would open the interface to start scanning.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• 4655 HP Office Jet: How can I fax multiple pages using the hp officejet 4500 desktop computer

  How can I fax multiple pages using the hp officejet 4500 desktop that you just bought

  can you please email me at [removed personal information]

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• C6180 scan works very well from the printer to the pc, but hp solution center gives error 4, [(3,42,0)]

  Photosmart C6180 wireless unit connected to your PC running windows 7 64-bit ultimate.

  Scan worked fine but after some update (I have not seen that and when) stopped scan from the hp Solution Center. It gives an error 4, [(3,42,0)].

  If I scan directly from the printer, it works fine, even if I send the jpg for the PC images\Mes traverses the directory.

  I already deleted the hp Solution Center and reinstall it using AIO_cda_FSW_Full_Win_WW_130_140.exe

  Thank you

  hasksm

  Hi there hanksm,

  I'm sorry to hear about your problems with your Photosmart C6180 and Windows 7 scan and notice you receive the error code. I studied the error and found a position with a person with a 'Solution', so hopefully this will help your situation.

  Please see JasonBlake7 post: scanning error

  Please let me know how it goes and if you need help!

  Thank you

• OfficeJet 4500 Solution Center says "disconnected".

  I got this HP Officejet 4500 since last October and he has no problem, but something that came just earlier, I get this message on the solution Center HP saying that the printer is disconnected, but everything IS linked and it works.  Y at - it no adjustment I could do short of re - install the software?

  I was on the point to re - install the software but I ran my registry cleaner first, and that solved the problem.  Thanks for your comments.

• OfficeJet 4500: Solution Center

  Sinds last update windows 10 wil het Solution Center van op geen some wijze openen, reeds opnieuw geinstalleerd maar dat van geen Holland. Weet iemand wel Holland?

  Hello

  Thank you for using the forum.

  Try this solution:

  1. Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.
  1. Click the appropriate option.
  1. Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.
  1. Click on Uninstall and work through all prompts.
  1. Once uninstalled, the HP Solution Center should work.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• OfficeJet 8500 Solution Center will not load

  Solution Center will not load.  Error message: "HP Solution Center cannot work because your installation of the device is not complete."  Solution Center has worked for 3 years and no recent update of the software of the printer have been made.  Solution Center has been removed and reinstalled using the CD of HP.  This does not solve the problem.  Model is A909g, number CB023A.

  Hi there @MarianGrad welcome in the community!

  I understand that you see the error 'Solution Center cannot work because your installation of the device is not complete'. I have a few links below for you to view other messages and forums with other users with the same issue. They can help. If the problem persists, let me know which operating system you are running and the troubleshooting steps you have tried.

  HP solutions Center can not run because your device installation is not complete. What should I do?

  "HP Solution Center cannot work because your device installation is not complete."

• Problem with the installation of photosuite (solution Center) windows 7

  Hello

  I have a new computer windows 7 64 bit laptop and lost the installation for my printer disc. (HP Photosmart C4180)

  I downloaded the necessary drivers etc HP which at first seemed to succeed only to find at the end of the installation, that should be deleted photosuite. (It could be called HP Solution Center) I need to be able to use the scanner.

  Someone at - it ideas?

  Concerning

  Sharon

  Hi sharon_love,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-74950-2&CC=US&DLC=en&LC=en&os=4063&Product=1141647&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• OfficeJet 6500 Solution center will not install/help files missing

  Hey community:

  Have tried several times to install Officejet 6500 with the solutioncenter does not.  When I click on the icon to get an error message that the solution center was not installing correctly.  I saw a flash quick a message about the flash player, but on uninstall / installs later may not get the same message.

  All proposals/solutions.  Am disappointed right now with the Hp Printer.  Online tech solution was to place shortcuts to scan ap and says the printer works perfectly like her without the Center as well as the fax, but cannot fax from word doc.

  In addition, I don't have the help files to set up the printer.  Any help on that would be great.

  There could be two questions

  1. your computer does not have a more recent version. Please download and install. Now reinstall the hp software

  2. if above does not work. disable the firewall (including the windows firewall) and check the solution Center.

• After the software update HP Solution Center has only 3 activities

  After update the software and drivers for my HP Photosmart Premium C309A for my operating system of Windows 10, the House HP Solution Center has only 3 activities: image Scan, scan a Document and send a fax.

  Hi @jwilliamp and welcome to the community of HP!

  The Solution Center behave differently on Windows 10, somethings such as printing of CD are no longer supported in the new OS.

  Other CD print is there anything else that you see as missing that I can help you to find a workaround for? If you try to print on CD, you will need to find a 3rd party software that allows it.

  I'm sure this isn't the answer you were hoping for, but if it has solved at least your request, please click on the I accept as Solution button below to report your post as solved.

  If there is anything else I can help you with please do not forget to post again, I'll look for an answer.

  Thank you.

• Re-install the HP Windows 7 Solution Center

  My all-in-one printer is a HP C410a. It comes with software called HP Solution Center. I've had the printer for 3 years and played well until a few weeks ago. The HP Solution Center does not work and I can not reinstall it, either form the CD or the HP website.  One had a similar problem?

  You have the installed device driver? The current driver installation may be corrupted.

  Completely uninstall and then reinstall the solution Center HP can solve this problem.

  If you are having problems reinstalling HP install the driver full features, download and install

  Windows 7 (hppiw.exe) printer installation wizard

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW&JumpID=ex_r4155/HHO/IPG/ccdoc/PIW/

  Download the full functionality driver from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4059652&task

• Director of HP, or other software that allows me to use the scanner OfficeJet G55 on Windows 7 64 bit

  Hello!

  Does anyone know if there is HP Director, or other, available software that allows you to use the scanner on an OfficeJet G55 attached to a 64-bit Windows 7 system?

  Just found out: the driver supplied with Windows 7 does support analysis thus and scanning feature is located under "devices and printers".

• HP officejet 2010 Solution Center gets removed from my computer

  MY CENTER of SOLUTIONS HP 6310 officejet 6310 receives constantly deleated from my HP Pavilion 6838f computer. The problem is not with the printer or the connections but with Windows VISTA or a corrupted hard drive.

  So you install it, it works for awhile, and then it disappears?  Are you sure that the program is gone and not just the shortcut to the program icon?  Go to start / Control Panel / programs and features and see if the program is on the list.  Then, go to the actual executable file in Program Files (everywhere where it is installed) and see if the files are there and in turn on the executable file will open the program.  If so, the problem is to get the shortcut to stand where you place it.   If she's really uninstalled, then I have no idea why this is happening.  Are you sure that the program is compatible with Vista?  Will always be the printer print a test page for the start / Control Panel / Printers without the software (that is, the drivers and firmware and printer are always installed).  The printer even still appears?

  I recommend that you contact HP Techhnical support http://h10025.www1.hp.com/ewfrf/wc/product?product=1119598&lc=en&cc=us&dlc=en&lang=en&cc=us orhttp://h10025.www1.hp.com/ewfrf/wc/contacthp?lc=en&dlc=en&cc=us&lang=en&product=1119598 because it's their software, and they may have some suggestions - maybe download a updated version or install a patch or something like that.  The software and the driver are tied together and, assuming that you have a version 32 bit Vista, run fromhttp://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=1119598#N688 where you can download and try to install this version instead of what version you are using now.  This can solve the problem.

  I hope this helps.  If HP cannot or will not help you and reinstall the sottware update don't reolve the problem after back and we will see if there is anything else, we can try - but it is a HP software and they know a lot more on this subject than we do, they should be of more assistance here.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Portege Z30 - problems of USB - error Code 10 using the disk external HARD - SOLUTION

  Hello

  I wanted to just connect a problem and the solution I just got/found. It's about a Z30 with an installation of Windows 7 32 bit and a 1 TB mSATA SSD.

  I was unable to get any USB 2.0 drive Flash or any (if USB or USB 3.0) external HARD drive to work. They would try to install but I'd end up with a yellow warning triangle in Device Manager.

  After various attempts of a workaround - I spotted alongside the driver.sys and usb.sys load - there was a mysterious driver which I finally tracked down the wizard of related software.

  After uninstalling the magician - all USB keys and external HARD drive worked perfectly.

  Do not have this problem with an other Toshiba with a standard SSD EVO and magician - so not quite sure that the installation is triggered it.

  However problem now * solved.*

  Thanks for sharing!