Using updates after the crash of the system!

Similar Questions

• Problems with the updates after the system recovery

  Hello.

  After about a week after the system recovery, my computer tried to install updates 110 and stuck on number 56 for more than 3 hours.

  If I disconnect the battery and restart the system stuck halfway through the Configure updates - again for several hours.

  Someone knows what's the problem?

  Regards Terry

  Hello Terry,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because corrupt Windows Update files or parameters.

  I suggest you run the Windows update troubleshooting tool and check if that helps. Please follow these steps:

  a. press Windows + C keys and click on research.

  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'Windows Update'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, please reset the Windows update components and check.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  https://support.Microsoft.com/en-us/KB/322756

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Acer iconia a b3 - a30 errors after the system update

  Hi my Tablet conducted an update of the system. Everything is fine, but now I get errors for the portal app Acer and Opera app unexpected error please reboot if I restart the app it crashes again.

  Also is it possible to change ro_debuggable to 1, so I can use root adb shell thank you

  Robb

  Hi Robb,

  In regards to the error continues to Acer portal on your Acer device, I suggest that you can try to uninstall Acer Portal updates and reinstall by downloading the Acer Android portal according to its online help.

  If the problem persists, I will really appreciate if you could provide us with more information below. Thank you!

  1. Please send your comments via the portal Acer Acer BYOC applications support.
  
  
  2. Please capture that a screenshot of the error message occurs on the Acer site and we send it to the best solution.

  Acer BYOC Apps support

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Text tearing does not correctly after the system update. Any ideas?

  For the last two days the text on my PC (Windows Vista) has not been made properly. The problem seems to apply in all programs, including IE, Chrome and Word. The text is not unreadable, it seems just to have the missing pieces of some characters. Some policies are pretty clear, others (such as courier) are very bad. The problem seemed to start after an update of the system. Unfortunately, the system restore never worked on my computer, so this isn't an option. Any ideas on how to solve this problem would be welcome.

  Thank you.

  Rob

  Hide the update until there is a good solution to this problem by SM.

  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  Edit: Please read the latest entries of Susan Bradley.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/kb3013455-MS15-010-causes-font-corruption/8640d38d-19BD-46b6-9af0-6213c05107d3?page=21

  There seems to be a fix, some good news and bad news - it is only available in the Download Center. The links are displayed in his thread.

  K

• Why my wireless stop working after the last update of the system?

  My wifi worked perfectly before the last update of the system.  Now, it will not register, but a bar of signal and nothing works.  How can I fix it?  Makes unnecessary internet on TV, because I have not a wired connection is close.

  My TV is a model NSX-46GT1.

• Windows Update blocks the system off, it

  I shut down the system, while it has been updated of the system (Microsoft Update). Now it crashes, saying that this update no. 11 of 13 is busy

  What should I do?

  The operating system is windows 8.1

  The system should be able to launch an auto repair.

  First you must do a full stop down to Win 8.1 as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  After that, you must restart the laptop... Usually the system would start an auto repair procedure that should solve the problem of update.

• After the system restore, clock is located one hour before because of DST

  Because of a logon error, I had to perform a system restore.  After the system restore has completed, I noticed that my clock is set ahead one hour (DST).  I think that TimeZones eventually applied twice to the clock.  I can put back an hour, but I rather it would be correct.  I tried to re - download the patch for the DST, but that did not help.

  Have you tried to reset the clock -

  "With the time server Sychronising Internet?

  Have you checked your area etc

  TaurArian [MVP] 2005-2010 - Update Services

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• Notification of update of the system

  How can I get rid of the update of the system of Xperia to Marshmallow in the notification bar without the updat? I use the last version of lolipop and not interested in the update for the moment and do not want to be constantly reminded.

  You cannot by default, you can erase data for the software update application, it will remove the notification, you must restart your device.

• After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

  After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• No output on the monitor after the system resumes

  After the system goes into hibernation mode, then the mouse is moved or no key is pressed, the monitor does not come to the top again. On the keyboard it no NumLock light at the moment, although num lock is also pressed. If at this time monitor is turned on, it displays "VGA input No Signal" and monitor goes to sleep. Only way is to force a reboot of the system

  Hi AnjanaKumar,

  There are a few things to possibly resolve this problem.

  1. you'll want to make sure you update your video drivers directly from the video card manufacturer's Web site.

  2. it could be the power plan that you configured is not compatible with your configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Update of the system - will never spent 15%

  ThinkPad Edge E431; Windows 8.1

  I run Center solution and then system-> software updates. I then start the update of ThinklVantage system 5. It opens and when I start it, it goes for updates to the agent and stops @ 15% full not saying no applicable on the system package, it's whenever I do this. What prevents the update of the system function?

  THX

  I finally fixed it. I've been to download and re - install system update (after 5 attempts at installation). He now works and integrated into the solution Center.

• After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  Pls I need help to resolve this error message.

  Concerning

  Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

  Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

  If this isn't Atheros, install the Broadcom bluetooth driver.

  Here is the page of the driver for your laptop and Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218666#n311

  Bluetooth drivers are in the category network drivers.

  Let me know what happens.