USRobotics 56 K USB Faxmodem suddenly stopped woreking

Similar Questions

• My USB Ports suddenly stopped working

  Hello

  I connect a second hard drive on my desktop (hp dc7600 sff) and everything was going well until I was prompted to press F1 to save changes to new material. I realized my mouse and my keyboard are not 'read' via connected USB ports. I tried to change the ports but still nothing, so in the end, I was unable to choose the F1 for the recording of the new HARD drive. I tried all the other ports, but still, nothing.

  I am now faced with a dilemma, I can't go through the login screen because none of my input devices can be connected to the PC, as all modules are connected USB.

  Help. I need to return to my beloved PC usage.

  Hello

  According to the description, I understand that the USB ports do not work.

  I would like to know some information.

  1. Have you tried using the keyboard of the screen?

  Try to use your computer using the keyboard of the screen and check.

  http://Windows.Microsoft.com/en-us/Windows/type-without-keyboard#type-without-keyboard=Windows-7

  We can refer to the suggestions by Mohammed Raieed said on June 1, 2011 and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/why-did-my-USB-ports-stop-working-suddenly/11303612-0809-4A3B-a2ba-c0c6b1234e97

  You can also check:

  https://support.Microsoft.com/en-us/KB/953367

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• USB mouse suddenly stopped working, what should I do to make it work?

  I have a dell Inspiron 630 m and I am using dell MOC5UO mouse. I did the difficulty of recognition by Microsoft fix center USB drive but the mouse is not always answered / work. Even if so corrupted windows files system so I wonder how can I reset my system to factory settings.

  Please help if you have answers to these problems.

  Hi PramSai,

  1. Did you the latest changes on the computer?
  2. When was the last time that the mouse was working fine on the computer?
  3. You are able to use other USB devices on the computer?
  4. What happens when you connect the mouse to the computer?

  Method 1

  Check the status of the mouse on the computer by using the Device Manager.

  I also suggest that you test the mouse on another computer.

  Troubleshooting of conflict of devices with Device Manager

  http://support.Microsoft.com/kb/310126

  Method 2

  If the mouse works on another computer then check out the Microsoft article below and try the steps mentioned, check if it helps.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  method 3

  If none of the above steps work then I suggest that you check with Dell technical support if there are new updates for the mouse.

  Contact Dell technical support

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&CS=19&l=en&s=DHS

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• USB ports suddenly freeze and stops working for 10 sec after power off or powered speakers

  Original title: Usb Ports stop working for 10secs after power off or powered speakers!

  Hello

  I have no why, but my usb ports suddenly hangs for 10secs when my speakers turned on or off the power in case of operation of pc... And I have a usb mouse usb wireless keyboard and... with this problem that I can not work properly... and some times my mouse work in early upward and then I should use my keyboard to restart the pc... Then it works very well! Help me please. !

  Hi Thierry,.

  This issue does not appear with Windows that even after you perform a clean installation. So for me, it looks like a material damage. I would recommenmd get you in touch with the manufacturer of your computer and to do the repair.

  Do not hesitate to contact if you have problems with Windows in the future.

• USB mouse and keyboard suddenly stopped working

  My USB connected Microsoft USB Bluetooth mouse and keyboard suddenly stopped working today. After researching everything I could, I didall that I could find as a possible solution that has been:

  • Update of the chipsets
  • Uninstalling usb in Device Manager and reboot devices
  • Updated via Device Manager, usb devices
  • Reformatting and reinstalling Windows 7
  • Stop, unplug and allow the card mother "reset".
  • Try multiple ports
  • There is no 'connect' button on my mouse so I can not sure try this
  • Replace the batteries in my mouse
  • Obviously both devices have been connected
  • Updated the software for the mouse

  I have tried literally everything I could think of or read previously and I am out of options. Oddly enough however, after reformatting and reinstalling windows, my USB storage device is found and is working, but the keyboard and mouse are not. Please don't bother not suggest anything I listed above, I obviously already tried and found no chance.

  Update
  I have solved my problem. For later use, if anyone has this problem and no other solution seems not work; That's what I did.

  I bought a USB 2 ports PCI card and installed in my computer, then go back to Windows XP. While my original front and rear USB ports still recognize a flash drive, they do not recognize the keyboard or USB mouse, make ports PCI card. I had also updated ALL the updates of windows on the site, not the auto update available on the desktop. Although I don't know the cause, I am certain that somewhere, something was is altered by the hardware or software, and my default USB ports do not recognize mouse or keyboards.

  Another piece of knowledge in case anyone is interested; I use a card mother gigabyte s-series and my nvidia video card GeForce previously is no longer recognized in the port, it would cause my computer go into a State of hibernation and the monitor would go into "Analog Power Saving Mode". The only solution was to spend a friend with my video card. (Its graphics card is a GeForce 9800 GTX, mine was a GeForce 9800 GT. No reason why it should make a difference.) According to me, even if my computer is less than two years old, I was sold a bad mother. I read online cases in other forums for technical support of people having the same problem. Gigabyte motherboards stop random ports for no known reason.

• Satellite L300 - Built In webcam suddenly stopped working

  Hello

  I have a Toshiba Satellite L300 with a built-in USB 2.0 camera and a windows operating system 7, the camera suddenly stopped working for about 2-3 weeks ago with unknown reason!

  I tried the system restore, uninstall and reinstall the camera driver, preformed a complete analysis by kaspersky internet antivirus 2012 (updated) and I also ran a complete system and drivers troubleshooting... and the problem persists...

  When I use windows live movie maker it gives me an error saying: can t record audio or video of the selected camera. Make sure that the device you are trying to use is properly installed and not currently in use by another program.

  The microphone works well on Skype, but the camera does not open!
  Please tell me how to solve this problem, what missing am me?

  > I tried the system restore

  You got the device using the Toshiba Recovery disk?
  In this case the cam should work

  Otherwise I would say that this unwanted material s.

  Some users here in the forum have reported a webcam problem and the reason for this was a loser between the cam module and the motherboard connection.
  The webcam is connected to a USB controller on the motherboard.
  If the connection does not exist, the webcam does not appear in the Device Manager it does not appear in your case? Check this box

• Toshiba Canvio basic 500 GB its suddenly stopped working

  Toshiba CANVIO 500 GB V63700-A BASIC
  I (full) support for 2012 and used, it can time.

  Now, it has suddenly stopped appear on my PC, sometimes showing message saying "device not recognized".
  About 2 months ago I bought a new PC with windows 8 (previously 7).

  All others under a new external storage devices works fine
  I also have 593400-a 500 GB 08/11 that work very well.
  also DTP110 1 TB 07/13 and DTP110 1 to 07/14, plus 3 more other make also works very well.

  Thanks for your help and advice

  Each HARD disk belongs to "wear".
  What does that mean? Well, sooner or later each HARD drive is going to die... and in most cases, these questions appear suddenly and are surprising.

  This HARD drive is a device of simple plug ' n play... This means that you have to connect it to the USB port and it should work...
  If this is not the case, the unit may malfunction and usually it is not repairable.

• My finger that print Scanner suddenly stopped

  

  PLEASE HELP ME SOLVE THIS PROBLEM... IM OUTTA SOLOUTIONS z:

  Hi SAMIxxx,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your computer HP laptop and suddenly stopped fingerprint reader. The fingerprint reader is not USB, I'm not sure what this device into your USB port. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices and restart your computer. The fingerprint is listed under human interface devices. I would recommend a system restore. That should reset everything that has interfered with your player. I'd be happy to help you if necessary. How can I find my model number or product number?
  Please respond with an operating system that you are running:
  Operating system Windows am I running?

  Please let me know.

  Thank you.

• Photosmart B110 suddenly stopped printing (Mac user)

  Photosmart B110 stopped printing (mac users)

  My printer, which worked very well last week suddenly stopped working. It is not configured for the wireless, but is connected by cable to my Mac (OS 10.6.8). The printer is turned on, the computer attempts to send that message printer is put on the queue. Then it disconnects. But befoee does, it does not print the last piece (5 lines), text file, then a line of gibberishg.

  I went through the page, deleted in case of problem, printer drivers according to the instructions but then realized I couldn't add them back again. The Mac can't "see" the printer with the USB cable. And there seems to be no way to add them to the "add a printer". It is empty.

  So now, I can't even all print.

  Would appreaciate any help I can get. Thank you.

  Hello

  Try to restart the Mac and printer and check any change.

  So make sure that the most recent driver is installed by clickign the icon Apple, then software update.

  If this does not help solve the problem try to reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now go to Applications > Hewlett-Packard > utility device, follow the HP installation wizard and try to print again.

  Please let me know if this is useful,

  Shlomi

• 6500 E709n: All-in-One has suddenly stopped working

  My printer suddenly stopped printing. In addition, don't copy or scan. I installed the new print cartridges, cleaned, heads unplugged and replugged, etc.. It is connected to the computer by a network, but I also tried USB cable.

  When I try to print or copy the leaves come out of the totally blank printer. But when I do a test of color, all the colors print correctly. When I try to scan to the office, the scanner shows the inage scanning but it does not appear on the desktop.

  It worked perfectly until today.

  Hi @donkaul,

  Welcome to the Forums of HP's Support. I understand that you are no longer able to print or scan. I would like to help.

  Have you tried to reset the printing system?

  Reset the printing system:

  1. Click on the Apple icon ( ), then click on System Preferences.

• Wi - Fi and network suddenly stopped... Local only (Vista).

  I basically solved my problem. I'm writing this in case someone else has this problem.  (I was without any networking capability for about a month after a failure and request Windows update several uninstals due to a malfunction stopped responding - don't know if any of these are related?)  The computer couldn't even * is * on the network.

  First, I eliminated material as being the cause.  My suspicion is that a firewall was still in force, even if I completely uninstalled my Antivirus and disabled the Windows Firewall already.  Then I tried to disable the Base filtering engine (the "Services"), and * voila! * all returned.  I immediately installed a temporary, caught up firewall on Windows Update and reinstalled my Antivirus.  Everything's fine now, as long as I keep the Base filtering engine.  Rebooting it stops all the networks again.  I don't know if there are risks to let off, but for now, I'm happy.

  ******************************************************************

  Sorry if it's verbose.  I was no longer able to use networks of any type for about 3 weeks on my laptop Vista Home Basic.  Are wired and wireless down (I use different routers to a cable and Wi - Fi), while my Office XP continues work as a champion using a router.

  Everything had been working fine for a year or more until what all of a sudden stop.

  I also can't connect to the network wirelessly at my school more (it is a laptop).

  (Note that I am not currently under any additional firewall beyond the Windows Firewall).

  Three concurrent problems occurred at the time of the failure which could be related.

  (1) I tried an uninstall of the interface software LegoMindstorms NXT after a school project.  Uninstalling shifted on for about an hour and has stopped responding.  I did a system restore and repeated the uninstall.

  (2) I noticed the 'auto-protect active"icon of Symantec AV was changed to"disabled", even if I was not disabled it and my license is up to date.  In the settings menu, I unchecked and recontroler the auto-protect of selection, but it didn't fix it.  I tried to uninstall it, and it stopped responding as well.  I did a restore and another attempt to uninstall succeeded.  Windows Firewall and defender will have to do for now.  (I'll be reinstalling my AV soon and will get updates when I am able to connect again).

  (3) I reviewed my recent Windows updates installed and found the last (KB982536) has a status marked "failed".  I uninstalled that before that failed just to see if she had caused the next update not working, but it does not solve the problem.

  * I tried several system restores, but none have set.

  I also did the following:

  tried another ethernet cable
  * removed wired and wireless cards from the Device Manager, rebooted and (allowed them to reinstall)
  * updated to the latest version of the NETWORK adapter driver by using my other computer (XP) and the copy of the USB
  * sfc/scannow
  * checking memory
  * chkdsk
  * netsh int ip reset
  * netsh int ip reset c:\resetlog.txt
  * netsh int Reinitialis
  * netsh winsock reset
  * netsh winsock reset catalog
  * netsh interface tcp set global autotuninglevel = disabled
  * ipconfig/flushdns
  * nbstat - r
  * nbstat - rr
  * Microsoft Fixit "Dotnet" cleaning tool for Vista (copied from USB)
  * Micorsoft Fixit "50357: cannot get an IP addy" (copied from USB) - has attempted but * is not * run
  Tried to IPv6 without commitment, but has not helped - I finally put back it

  ---------------------------------
  Results of the ipconfig/all command
  ---------------------------------

  Windows IP configuration

  Name of the host...: Ethos
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
  Physical address.... : 00-16-D4-A5-9B-7E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::815e:ad3e:e462:4e77% 17 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.78.119 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 452990676
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 802. 11b / g WLAN #2
  Physical address.... : 00-1A-73-0F-EB-C9
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::2e:baf9:726c:defb % 15 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.222.251 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 268442227
  DHCPv6 DUID customer...: 00-01-00-01-0D-71-D8-8B-00-16-D4-A5-9B-7E
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {6A632B82-93D2-45ED-8829-3B6C5DF2C50F}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5ECD7A6B-D36C-4179-9928-D56EFA36F365}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Card 6TO4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  ---------------------------------

  (An upgrade to Windows 7 can solve the problem, but this isn't an option I will consider for now.)

  Your settings do not look correct to me.  There is no default gateway (which alone explains why you can't connect).  Good number of other entries look right either (they are different, that I'm used to seeing).

  I suggest you remove all your network connections (remove them all) and start from scratch.  Configuration of the LAN connection, and when you get this work then set up the internet connection and get this to work.  Do not re - install connections, you do not need more (it seems that you have a good number of people).  You have tried to repair these connections and there may be something wrong with them which cannot be repaired (they can be corrupted or some type of conflict or other).  Starting with a network connection fees registration with nothing (not wired or wireless) and do everything as if it was a new machine can solve the problem.  Make sure you know the correct settings before deleting the current connections (and make sure that they are correct even if you need to contact your ISP for confirmation).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• desktop printing suddenly stopped

  Office printing suddenly stopped 2 days; remote printing still works perfectly; Watch office printer "uninstalled". Print doctor says that the desktop computer and the printer are connected to different routers, but nothing has been changed; the question arose just all of a sudden, so I don't think that it is an accurate diagnosis. When I try to reinstall the printer, it says the IP # is already installed (which it is and it will print from a laptop, shows just "uninstalled" for desktop printing.) Help!

  Please ignore my previous question. I reconnected it the USB cable and everything works now. Thanks for your help.

• Windows 7 screen saver has suddenly stopped working

  Recently, the screen saver on my laptop (Sony Vaio Z model VPCZ119GX with 6 GB of ram and a core i7 processor) has stopped working.  He has always worked in the past, but suddenly (as of mid-June 2010) stopped it.  None of the Windows 7 default screensavers work (for example to mystify, ribbons, etc.), nor fact Windows live Gallery screen saver.

  I am running Windows 7 Professional x 64.  If I go to preview, I can see the screen saver, but it does not start after a period of inactivity.  I reduced the timeout to 1 minute and I tried both require a password and no password and neither work.  I do not use a wireless mouse (I have read other posts that a mouse without a wire could cause this problem) and I have fixed via the USB port.  I went in the Manager of peripheral and done so that devices that have power management options have been disabled.  I checked my task manager and I don't notice anything out of the norm running in background.

  Here's the interesting part.  If I connect to the hidden administrator account screen saver works perfectly.  If I create a new user account screen saver still does not work.  Something prevents the screen saver works in the created user accounts, but works perfectly under the administrator account.  What could cause this problem?  How to solve this problem?

  Another interesting information.  The same problem exists on a friends Lenovo T400s under Windows 7 Ultimate.  His screen saver has worked a few days ago (week of June 21) but suddenly stopped as well.  A windows update may have caused this problem?

  Finally, I have not tested this, but it seems that hibernate/sleep has also stopped working.  Unfortunately, I sleep/hibernation activate after 4 or 5 hours and I can't say for sure 100% that I let the computer idle for this period of time, but I could have sworn that I have.

  I think screensaver and put into hibernation / sleep are all affected by the activities of intelligence and something is causing the machine to think that this is not idle.  But under the Admin account, it works very well.  I spent hours trying to understand this point, but without success.  I have even restored to the point of thinking older restoration that something could happen, but it does not solve the problem either.

  Help, please!

  Brian

  briboynyc and dougfulcher

  I am so happy that I found this forum.  About 6 weeks ago, I lost my screen saver on our computer brand new with windows 7.  I was on the phone with HP in India twice and finally they decided to take back me to the factory restore thinking that it was because of our backup files in windows XP.  Repeat all. I backed up all my files, and then we started again from the beginning.  It's the same thing.  We packed up the computer and returned to the store, a new computer and started all over for the third time.  Last night is the same thing.  I was really frustrated and thought maybe it was a little problem with windows 7 so decided to get on the microsoft Web site to see if I could communicate with someone from Microsoft.  That's when I discovered this forum and started reading everything.  When I read the answer of dougfulcher, he mentioned magic jack running in the background.  We disconnected magic jack and that solved the problem immediately.  I am really grateful and only wish I had discovered it before that I lived all this computer return and restoration.  Everything seems to work very well.  I hope this helps someone else.

• DeskJet f380 printer suddenly stopped working

  My deskjet f380 suddenly stopped working with my computer laptop win 7 it shows offline

  Hello

  Have you tried to uninstall/reinstall the software?

  How are you connected to the printer USB or wireless?