V313w - printer does not accept refilled ink cartridges

Similar Questions

• Can not get address for printer does not accept password

  Went to the eprint centre to save the printer worked fine but when we tried to give address printer so we can send to the remote printer does not accept the password any itry

  MasterBinker, have you tried to use the link you have forgotten the password in the login page for ePrintCenter?  This should send a new password to the email address.

  You can also try using a different web browser.

  Kind regards

  Sean

• 6210 all-in-One printer: European-sold printer does not accept the United States-have sold cartridges

  Hello

  I need advice to fix this... My printer (HP Officejet 6210 all-in-One Printer) that I bought in Europe does not accept the cartridges sold US. The printer identifies the cartridge 94 as incompatible. On the site of HP 94 cartridge is listed as being compatible with this printer (the original cartridge is 338). It seems that I need a new printer? It still works perfectly. Should I try other types of cartridges?

  Thank you.

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.

• OfficeJet Pro 8500 does not accept the new cartridge

  My OfficeJet Pro 8500 has 910g does not accept the new magenta cartridge. It displays replace following used cartridge in the order of printing continues (translated from Swedish). I've done various resets and now to restore the alos an OOB (out of the box), does not help. My weighs 40g 940XL cartridge so I know what it it not empty. I have read a lot about the problems of cartridge maggenta but found no solution. The printer is fine, but this problem is driving me crazy! I have always recommended HP printers and have owned quite a few over the years,

  No problem, I understand.

  I think that could happen is that the oval pin mechanism comes into contact with food has become defective over time. Its supposed to sink to bottom when feeding is complete (on inserting). Over time as the ink level runs the mechanism will expand gradually until you reach full extension on what an ink level alert is triggered. What might happen in your case, is that the mechanism is not entirely depressing even when the new full provision is inserted. This would explain why to apply the tape inside the oval window on the supply allows the new offer be detected. Unfortunately, the fix for this would be to have the machine. If you think it's something you want to do here is a link where you can check the warranty status of the printer and based on this status, you will be presented with relevant options

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&DLC=en&docName=c01321436&LC=en&product=4116838

  With regard to the branch point the device directly into the wall socket, sometimes for some questions (usually power up/on) the resolution can be plug directly into the wall in the routing through a power bar or surge protector can induce weak variations of the voltage applied to the unit. However, this should not be a factor in the problem you are experiencing, so there should not be any need for you to change your current configuration.

  More sorry that you are having a problem with ink level detection on your device. Please post back with other questions.

  Best.

• Do not accept HP ink cartridge

  My F4180 all-in-one printer will not accept a new HP ink cartridge. I only use HP cartridges. The computer gives me the message that my cartridge is defective or incompatible with my printer.

  Clara_B wrote: Hi, ptr613, 5520 PS did you get an error saying something like the cartridges of the older generation?

  Hi Clara_B thank you for your message. No, the message, Word for Word, was ' the printer is in the next error state: ink cartridges HP no approved. " He couldn't be a cartridge older generation it was only a month or two old, and had worked perfectly in my original HP5520 printer. Contacts look clean and sparkling. Printed on the label expiry date is 2014/11. In any case my previous post was written in a moment of intense frustration. The printer works fine now with the new cartridge except that he often gives a "paper" message even when the bin is full. Then I have to pull the paper and press return and it works again for a while. I can live with that. But still - a printer Photosmart with print, scan, copy, and wi - fi, all for $69 - how good is it?

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• my hp psc 2355 does not recognize my ink cartridge on the victory. XP machine

  my printer is not recognizing my HP ink cartridge, black... I have the power turned off, disconnect power cord thing...

  didn't help and it just shows the Cartrdge of color which is close to empty...

  I'm sorry you have a problem with the printer. Here is a document for your printer model that responds to an error of rejection for the cartridge. It provides solutions to try to correct this error with the cartridges one example of one of the steps planned by ensuring that the build-up on the contacts are not the source of the error of rejection. I hope this helps.

• Printer does not recognize black ink and color ink prints instead.

  My printer ran out of black ink so I had put a new cartridge in and it says that it is origanal ink and he has an x on the black ink, bar it prints off the coast of the color ink butthat is exhausted, black ink, I put in what's new in lexmark but higher efficiency

  Original title: printer

  Hi Wolfgang Peiker,

  Thanks for keeping us posted and share this information with us.

  Method-

  I would like you to contact the Lexmark Support for assistance.

  Check out the link-

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  We know if you need help. We will be happy to help you.

  Thank you.

• Printer does not accept the new ink cartridges Hp cartridge is missing or damaged.

  Cannot print anything in black ink. Tried everything. really need help with this one

  Resolved solution printer worked after being off all night

• printer does not recognize the new cartridge installed

  How can I get my HP deskjet printer to regonise I installed a new HP cartridge.

  Had to replace 2-magenta fine;  black photo (2 new cartridges tried) message-no ink.

  Have cleaned the contacts on the cartridge & printer. still no joy. What can I do next?

  Hello! Had a second go to cleanup & reinstall & all works well.

  Thank you!!

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

• V313w printer does not print

  The printer icon indicates that there are 7 pending print jobs, but when I click on HP printing, nothing happens.

  Does anyone know what I should do next?

  morningalarm,

  Run delete print jobs to delete the print jobs stuck in the queue, and then restart your computer.

  Open the problem document, click on file, print, and make sure that the appropriate printer is selected.

  Rick

• C6280 printer does not accept the change of format of letter-size paper

  Although I changed the paper size in printer A4 letter Properties menu, it always prints as well on the size of the letters.

  Thanks Gemini02 for your suggestion, but I already did all that and it made no difference.   However, I have now solved the problem myself.   After a lot of research, I discovered there is a print setting allowing the DISCOUNT A4 to adapt to the size of the letter and it was active.   To turn off, in an open document, click file, then Options, and then click Advanced Options, then scroll to the bottom to halfway and uncheck the box on "scale content for A4 or 8.5 x 11 paper size".

• Printer inkjet Epson Stylus C 45 refuses to recognize refilled ink cartridge. How to solve this problem?

  I have the printer inkjet Epson stylus C 45. When an ink cartridge Epson gets sold out and I replace this cartridge with an Epson cartridge refilled, the printer does not recognize this refill cartridge. As a result, no printing could be done. Is there a way to make the printer accepts the reloaded cartridges?

  Hi Pradip Kumar Bhattacharjee,

  You receive messages or error codes?

  It is a hardware problem. It seems that some printer settings must be modified to get the cartridge that is recognized by the printer.

  You can get in touch with Epson support and are looking for the same thing.

  Epson Stylus C45 troubleshooting, manuals & tips and tricks

  Epson support

  You can also check out the link to the thread and see if it helps:

  printer does not recognize the ink cartridge

• HP photosmart b110a: does not accept my password

  tried to print from the ipad, could not. printer does not accept my wpa password. Help.

  Hi @goldilocks45and welcome to the Forums of HP!  I'd be happy to help you yo configure your printer to your network so that you can print from your iPad. Is WPA type encryption, or perhaps you have WPA2? I ask about the type of encryption, because I saw a problem recently with the secret codes WPA2 which seems to be from some routers and firmware updates.

  Have you tried the printer on the network in the past, have you recently changed your password? Is your password contains special characters that maybe the printer does not? Are adjust you upper and lower case?

  I can't wait to hear back on your part!