V5 - it will support the external display 4 k?

Similar Questions

• Satellite U400 (PSU44A 00H00C) - supported the external display resolutions?

  Hello

  Where can I find a list of external resolutions supported by my laptop? (VGA and HDMI) I would like that by an external monitor if you need to check that my laptop will be able to use the native resolution before you buy.

  Thank you very much
  Selba

  Hello

  Did you check your user manual? Normally you can find a list of the supported external screen resolutions.

  Check this box!

• 13 Yoga will support an external display of 1920 x 1200?

  I bought a Dell monitor that has a resolution of 1920 x 1200. Is it possible to change the output resolution of my Yoga 13-superior to his native 1600 x 900? I use a DVI cable to HDMI as the supplier told me that it would do the job.

  Any help would be welcome!

  Yes, it can be changed. Connect your 13 Yoga to your monitor.

  It should automatically configure and change the view for your DELL to 1080 p.

  Right-click on the desktop, click screen resolution.

  You can select the DELL monitor from the menu drop-down and check that the resolution 1920 * 1080 is selected.

  You can also ensure a single display screen or the two screens (dual display) or expand views.

  Personally, I don't use the display on a single screen (TV) to reduce the load on the GPU.

• Satellite M50-130: no display after the passage of the external display in main monitor

  I have a very strange problem.
  My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...

  Well, any help would be appreiciated.

  Hello

  Could you please be clearer? Is it possible to see something on the external monitor?
  Do you see something? What happens if you use the function FN + F5 device display?

  I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
  However, you should see the laptop if you will start Notepad in safe mode. Please check!

• Tecra S2 cannot switch to the external display

  With my Tecra S2 and when it is docked in the Port Replicator APR - III, I used to be able to connect my external (via DVI) display so that it was to automatically screen output to we by default, not only to the windows startup screen (Yes, I noticed the topic on the forum at the start of windows) but also when display login screen and beyond.

  Only problem now is that there is no more than anything, she now only sends the output to the external display when starting and then switches back to the computer screen displaying the screen Windows login and when you are connected to Windows.
  Also after commissioning and connection, FN + F5 does not at all, even when you switch to DVI, display does not illuminate.

  I feel that either the nVidia properties settings (double screen, unique, etc.) or the Mobile Extension Manager have something to do with it.
  Anyone who knows the answer / solution to this problem?
  Experts on the Mobile Extension Manager or several monitor in nVidia settings with of Toshiba Tecra?

  Thank you

  Arjen

  Hello

  Well, as I know it is not possible to set the external monitor as a default monitor.
  I use a Satellite phone and sometimes I plug it into the external monitor and use the extended desktop option.
  During notebook startup procedure the windows boot image will appear on the second screen, but the user name and the operating system appears on the screen of the laptop.
  I think you can use the external monitor but you can't set it as a default monitor and you can use it if the operating system has been released.

• Switching the external display to MBP screen retina, poor quality, need to restart FF19.0.2

  Here is the chronology of the events:

  (1) FF start on my MBP (OS 10.8.2) and the retina display working properly.

  (2) connect my MBP to a 24 "external display which has a resolution of 1920 x 1200 (defined as primary) max. FF displays well on screen.

  (3) disconnect the external display and FF is now pixel on retina MBP. Updating of system preferences Dispay doesn't seem to help, or I have not found the magic technique.

  (4) restart FF and everything is fine.

  The question seems so FF not to recognize the need to revisit the resolution of the retina.

  You are welcome

• How long Apple will support the iPad mini 1

  Hello fellow Apple lovers,.

  for my restaurant-bussiness I need 1 or 2 very basic iPads as cash-register using Lightspeed software. There no need again, at the top of the iPad Bill.

  My wholesaler suggested me 2 new iPad mini 1 which is a very affordable option. My question for you and apple is: how much time do you think this model to be supported?

  Thanks in advance for your response!

  Pieter Dijkema

  Apple are not here, these are user forums, you will not get a response from them.

  The first generation iPad Mini supports the latest version of iOS (9.3.1), if it will support the next major release we won't know until Apple announces that it is compatible with (the speculation is not allowed on these forums). As it has only 512 meg RAM (Mini 2 and 3 have 1 gig; Mini 4 a 2 gig) is probably limited to updates of iOS it is likely to support.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Portege Z30 - A - 18 M - cannot set the native resolution on the external display

  Hello

  I tried to connect two different displays full HD to my Portege Z30 - A - 18 M and I was unable to set the native resolution - maximum resolution I can put for those is 1680 x 1050... I was not so surprised by the first that I had a few problems with a native resolution when I connect to the laptop computer Satellite I had before. But then the same thing happened when I tried the other view.

  I thought that this notebook can handle a higher resolution external... Is there a way to force the native resolution of the external display in Windows 7?
  Thank you!

  Just a question: have you plugged your Portege with HDMI cable and use only the HDMI option?
  With other words went from the desktop to the external display only computer?

  I don't have this machine, but I think you should be able to see the desktop on an external device to the HD full 1920 x 1080 resolution.

• Does not work on Tecra A2 - FN or key how to switch to the external display?

  Hello

  Tomorrow (Saturday 6) I have to show a little presentation my Tecra A2 on an external display or projector.
  After that I have to install my laptop for the second time last month, the Fn or function keys do not work.
  With this problem I don't know how to work with the external display.

  Please can you advice?
  Sorry for my English at low altitude.

  Buist huh
  The Netherlands

  @J.Verberk
  Sounds you're a newbie and you're talking nonsence
  You comment is simply not qualified.

  @Hein
  You said that you have installed you mobile again. Did you use the Tosh recovery CD?
  If this isn't the case, I think this might be a reason for the FN key anomaly.
  After recovery use the laptop must switch with FN + F5 external peripheral connected to the laptop.
  If you use try beamer to turn the trap settings.

• HP Split: Port HP Split HTMI spoiled, any other way to connect to the external display

  HTMI HP Split connector seems weak and unable to detect the external display. Troubleshooted HTMI and HTMI port to the monitor cable to be ok. May need another way to connect to the screen, otherwise repair port (don't know not so easy to fix). Enjoy the century lights.

  2 way possible. There is such a thing as a usb adapter to HDMI.

  http://www.Amazon.com/cable-matters-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1428145993&SR=8-2&keywords=USB+to+HDMI

  USB 3.0 models provide a very good experience. Also if your laptop has the right hardware (Intel processor and wifi card, usually) you can use WiDi (Wireless Display), but unless you connect to a Smart TV with built-in WiDi you need a WiDi adapter.

  http://www.Amazon.com/NETGEAR-Push2TV-wireless-Miracast-certified/DP/B00904JILO/ref=sr_1_2?ie=UTF8&QID=1428146112&SR=8-2&keywords=WIDI+adapter

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• This Application do not support the requested display protocol - application on the view 6 Horizon Pools

  Hi all

  I am happy to report that I had a positive experience the 5.3 to Horizon view 6 view upgrade last night.  With PCoIP RDS Server connection works like a charm.  However, I get the following error message when you try to access any application that I published in the Admin to view:

  This Application does not support the requested display protocol

  I tried many applications and they all cause the same error.  Any ideas?

  I solved this problem.  Given that I've improved 5,3-6, closed have already been created for me (because I was already using a few RDS servers).  Although I left the default as RDP Protocol, I chose the option allowing users to choose PCoIP or RDP (AFAIK, publishing applications cannot run on PCoIP).  However, it is not enough.  Please make sure that the default protocol is PCoIP.

  To explain further: I have a connection standard RDS users at all as a Server Terminal Server Services, except that they use the view Client and RDP Protocol.  I'm not changing it after the upgrade, so it would not effect all users who have not upgraded to the 3.0 client.  However, I would like to publish some of the applications of this same server, instead of spinning upward another server RDS only for applications.

  In this scenario, the only way to achieve this is to make the default connection protocol PCoIP.  If left like RDP, apparently the application attempts to use RDP as the connection instead of PCoIP Protocol.

• Lightroom 4 will support the Sony A7r II raw files?

  Lightroom 4 will support the Sony A7r II raw files?

  Hi charlesb,.

  Lightroom 4 does not support files A7rII of Sony, as the version of Camera Raw is not the most recent.

  To read the images of Sony A7rII Camera Raw 9.1.1, and it comes with Lightroom CC 2015

  Please take a look at the article for the supported camera raw files: https://helpx.adobe.com/photoshop/kb/camera-raw-plug-supported-cameras.html

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• What Camera Raw will support the Nikon D4S?

  What Camera Raw will support the Nikon D4S?

  See:

  http://labs.Adobe.com/technologies/cameraraw8-4/?tabid=details#tabTop

  You can try this "Release candidate" version of the DNG Converter.

• HP Envy 15t: the resolution on the external display support

  I want to put my HP Envy 15t to drive an external, not as an extension monitor, but rather as my first monitor.  My external monitor is a Viewsonic VX2250, a bit older and I use an HDMI adapter / VGA.  (The Viewsonic also has DVI inputs... not sure it would make a difference.)  On my current tour, I use the monitor in its recommended (or native mode) 1920 x 1080 definition.  I love this screen.

  The adapter is a Bytecc HM-VGA005 and specs seem to indicate that it can handle a variety of video resolutions - Full HD (1080 p), WUXGA (1920 x 1200 mode RB) and UXGA (1600 x 1200-mode VESA).

  15 t is currently shooting in the recommended 1366 x 768 resolution.  If I understand the straight plug, in HD mode it is 1366 x 768 and FHD mode is 1920 x 1080.   The graphics card is an Intel Graphics HD 4600.  Is this the reason why I can't get a HD resolution and not FHD resolution on the laptop?

  But whenever I plug all this together and try and change the settings for screen for laptop, the external screen resolution is only 1024 x 768... pretty ugly.  I have it so that the laptop screen is dark and only the external monitor is on.  But it doesn't seem to be any choice I can do to improve this resolution.  I checked that the graphics driver is up to date and it is.

  What should I do to get the best screen I can on the external monitor?  Would like to buy a new monitor HDMI inputs get better results?  Do I need a different adapter?

  Thank you... Kurt

  Me again!  Well, it was a bit the nut behind the wheel.  I checked with the store that I've been buying my cables, adapters, etc.  He said to the Viewsonic monitor to see what might happen.  As I was put in place, he asked on the power adapter.  I got the USB cable but do not think it was necessary.  But after putting everything together in addition to feeding the HDMI adapter / VGA, I could see, I was getting the resolution I hoped.  Why it worked on the monitor Dell, no idea... maybe a better monitor or other VGA cable.  The Bytecc adpater didn't come with instructions, so I didn't.

  All right.  Hope this helps someone in the future.

  Kurt