vCAC network IP profile varies

Similar Questions

• Static IP network of profiles

  Use of reservations, you must network configuration profiles, but is there a way to disable VCAC to distribute any IP address of this profile?  Basically, I want to disable the vCAC DHCP

  I think THAT you can ignore the network using IP profile, you just have to choose a VLAN

• VCAC 6.0.1 network IP profile for Centos Blueprint award

  Hello

  I wonder if anyone has had luck get a machine of Centos to deploy from vCAC and be given an IP address on the network profile defined in vCAC? I managed to get this working well on Windows Server 2008R2 action plan, but can't seem to make it work on Centos.

  I followed a few guides out there that has gotten me to the point where I can join the Centos template customization of comments if the guide is for deployment via vCenter and requires manual intervention for the customization of work (you set the IP address in the customization, and then edit the material virtual and remove/re-add the vNIC) which is the kind of thing that would not be easy to imitate behind vCAC.

  See you soon,.

  I believe that the solution of the cleaner to keep me, had to start the virtual machine with no NETWORK card at all and delete configurations in sysconfig and then he can go back. I then added the NIC back in before I put him as a model.

• Pier show shared network - Manager profile

  Running the Server 5 and el cap, if I add network shares to a dock users that they show as a question mark that is not resolved when you click on it.  I think it's because of the network shares mapped AFTER THAT the docking station is responsible.  It wasn't a problem at the time of the Workgroup Manager, but things have changed to ovviously...

  I created a login script to 'kill the dock' after a period of time.  I also have a logoff script that did other things, so I don't know that the correct settings are enabled to allow scripts to run.

  Runs the script .sh during the session of the user refresh the dock and the network properly shortcuts card.  However, it is not automate as I want it too.  Ive has set the script to pause for 20 seconds, but it still does not for some reason any.

  Here is my script that is saved as a .sh and CHMOD 777 and then transferred to the Profile Manager in the section "login scripts.

  #! / bin/bash

  # Dock charging

  sleep 25

  Killall-KILL Dock

  output

  Anything obvious ive done wrong?

  Thank you.

  Just read this in another forum

  "

  • The connection-hook script runs synchronously before other connect actions and must therefore be short.

  "

  This explains why my script doesn't work as I had hoped.  I will try to start a file of a volume mapped instead network and see if it works.

• Missing network connection profile

  For my home network, network profile under 'Manage wireless networks' is no longer in effect. And I can't connect to my home wireless network. I can connect to other wireless networks, as in an Internet café or a similar place. He always seems to have the information network somewhere, I can't find it.

  A few ideas:

  • Make sure that your wireless router is enabled and functional.
  • If your computer has a switch to turn the wireless on the case, be sure that it is turned on.
  • Make sure that the wireless network connection is enabled.
  • In "Manage wireless networks", click 'Add' and create a new profile.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• vRO 6.0: how to get network vRA profile data?

  I'm trying to write a vRO workflow will get each vRA network profile, enter the (external) static IP address ranges and display them (for now).  The problem is that I can not yet understand how to make the first move (get vRA network profiles).  Someone has an idea?  Thank you.

  -Stephen

  Hello Stephen,

  You can use the vCACEntityManager.

  Your NetworkProfiles are stored in 'StaticIPv4NetworProfiles'.

  Address ranges and the use of intellectual property, you will find in 'StaticIPv4Ranges' and 'StaticIPv4Addresses'.

  Search for example CRUD Infrastructure tasks management Scripts using the vCACEntityManager

  Greetz

• Machines Linux taking two IPs of network profiles, but enrolling in vCENTER.

  Hi all

  I have 2 problems here with vcac network profiles.

  When I use profiles network with reservations, I'm having windows machines configured right but the machines Linux booking 2 IPs in the network profiles, but registering with the profile of a network. I checked to see if the Linux machines have been set up to have two vNIC, but no. However, I tried to assign network profiles at reserves using the custom property 'VirtualMachine.Network0.ProfileName' and this way, I'm having the same problem as described. But this time for windows and LINUX machines.

  Secondly, I have network profiles configured with mask, gateway, DNS server address, and Suffixes. When my machine is using network profiles, inherit from the shape of the network profile DNS suffix or I have to use the 'VirtualMachine.Admin.NameCompletion' property so that my machine to register in the DNS server.

  vCAC version: 5.2

  Custom spec: using

  Static: Yes

  Appreciate the HELP in advance.

  Nits

  Yes, the Linux machine will inherit the config of NP in the CustomSpec. In addition, if you install the GuestAgent (instead of using the CustomSpec) which will also set the relevant parameters. To do this, the action plan requires that the custom property VirtualMachine.Admin.UseGuestAgent be set to True.

• In fact, I'm looking for how to disable the discovery network for all profiles (Public, private, domain).

  * Original title: GPO registry key or change

  Hello

  In fact, I'm looking how to disable the network for all profiles (Public, private, domain) discovery and how to disable the file/printer sharing just to the private profile and public with a GPO or a script.

  I ' found some GPO as disable inbound/outbound rules for sharing files/printers and discovery of the network, but I think that a better and more easy solution exists.

  Please can you help me. :)

  Best regards.

  Hello

  According to the description, I understand that you want to disable the discovery network for profiles.

  I suggest refer you to the Microsoft Help Article below and check if that helps.

  https://blogs.technet.Microsoft.com/Networking/2010/12/06/disabling-network-discoverynetwork-resources/

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Access to the network-> ACS 5.4 authorization profiles

  Hello

  For ACS 5.4:

  In-> authorization of network access profiles, there is an access profile allow it. If you try to change it to the top of the POPs a message that says:

  "The profile you have selected is reserved and cannot be deleted or changed.

  Nobody knows what this profile contains in its base of rules? If I wanted to create a similar profile what common tasks or attributes Radius would I use? The same would go for a profile to deny access. No one knows what it would look like?

  I looked at common tasks and the Radius attributes for the new profile, and it seems not very intuitive.

  Thank you

  Jim

  Authorization profiles are used to define the RADIUS attributes to return in an Access-Accept

  The permitted access profile contains no attributes at all and is actually an empty response. You can create an equivalent profile by simply giving it a name and no other attributes.

  Common tasks and the RADIUS attributes are the two ways to set the attributes to return:

  -Normal: provide an abstraction of seizure/selection of the use-specific RADIUS attributes and values are entered when using

  -RADIUS attributes. manually enter the however, attributes, and its value

  There is only one profile predefined for DenyAccess that issues a rejection of access and can not be created manually

• How to remove my Windows Vista network connections

  Connections of title: original network

  Can someone tell me how to delete my network connections so I can start again

  Hi Goryon,

  Method 1:
  

  (a) go to control panel > everything on the control panel > network and sharing Center

  (b) click on one of my active networks,

  (c) at the bottom left it would merge or delete network locations

  (d) remove from there

  Method 2:  You can try to remove all the listed networks and then restart the computer

  (a) click Start and select Control Panel.

  (b) open the network and sharing Center.

  (c) click manage wireless networks.

  (d) remove all the network connection listed.

  To create a new network connection\profile, see link below

  Create-or-change-network-profiles
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-or-modify-network-profiles

• Difference between "Home network" and "Business Network" WITHOUT a domain name in Windows 7?

  I'm paranoid and always try to choose security options more high.  In preparation for the implementation of a small Windows 7 network behind a NAT router wireless and wired, I'm working through "Microsoft Windows 7 in depth" by Cowart and Knittel (what, rights of copyright 2010).  I fell right on the following steps (mentioned verbatim in p. 446-447), that I don't understand.  (The steps are clear enough but the real difference between the first two choices is not.) :

  «.. . Click on change settings, click Network ID...  You are prompted to select the option that best describes your computer:

  • This computer belongs to a network of business; I use it to connect to other computers at work.
  • This computer is a computer at home; It is not part of a corporate network.

  «That one you choose made a significant difference...»  If you choose the option "Business Network", Windows configures your computer for a better level of security it will be for domestic use [my underlining].  The wizard then asks you choose one of the following responses:

  • My company uses a network with a domain name
  • My company uses a network without a domain name

  «.. . If you build your own network as described in this chapter, select a field, then click Next.  The last question asks a name for the network working group.  Leaving the WORKING group by default in place".

  It seems that you can set up a "Business Network" 'without a domain' that outward behaves as a similar "home network".  If Yes, what is this 'higher standard of security' that will result? -JCW2

  There is only one difference between home network and profiles work that appears when you sign in for the 1st time.

  A profile of home network allows to create or join a homegroup, on a job profile that you can not. So what it means actually using the term "business" is false and the differences in security are limited.

  One of the limitations of a workgroup can access one action requires the credentials of all users to set up on the host pc, setting up a homegroup automatically creates a common user between computers that could be considered a low security setting...

• Join the domain and keep the Local profile

  Research on the Internet for the solution and find no official response from Microsoft.

  Have updated the registry settings in "ProfileList" and updated the permissions on the folder of network user profile - now station immediately disconnects.

  This seems to be a feature of Essentials connect Assistant, but we need this in the standard.

  How to connect Windows 7 computer professional currently as part of a task force to the area and keep the local profile?

  Please provide step by step procedure.

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Problems of Smartphones with WIFI blackBerry without a data package (network of curve 8520 O2 - UK)

  Hi all

  Sorry if it sounds a little vague but a buddy of mine has one just entered into the world of the blackberry and some problems, so I thought that I try and help out. It is not the data packet at the moment (trying to persuade, but thinks he can take the time lol) and attempts to use the wifi on the phone to access the internet at home. The phone is connected to its network and has received an IP address but still does not seem to let you browse the web.

  The browser settings have changed to the hotspot browser and I think the preference of connection has been replaced by a preferred WI - fi connection. Are there settings I can change that I may have missed that could help or is it something that has been locked by O2 to make you buy the data service?

  Thanks for any help.

  Robb

  If you have the hotspot active browser, should all needed.

  Go in manage connections > in the first section, to WiFi, is the WiFi network name listed, and what is right, a green check mark, dash white or what?

  Now click on manage connections > status of Services. What is next to the heading "WiFi network", active profile, etc.?

• Apply wireless network settings to all users

  I'm looking to set a Win7 machine to save a specific wireless network for profiles of all users who may connect on the system... so that when a new user logs on, it automatically connects to the specified wifi network.  Is this possible?

  Thank you

  Hi Vince,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• 4.2 ACS profiles with Ganymede?

  Hello

  I use 4.2 ACS (device) with network access profiles. It's a very big problem that profiles only support the radius Protocol, I need to use the Protocol Ganymede with profiles. I need Ganymede for permission command. Is it possible to have such a regulation on ACS 4.2:

  -If the logging of NetworkDeviceGroup1 using RADIUS uses local authentication

  -If the logging of NetworkDeviceGroup2 using Ganymede use RSA securID (external Radius Authentication).

  Best regards

  Hello

  GBA 4.X NAP works only with the RADIUS.

  -If you want you can go to ACS 5.X, which is more flexible.

  run the IT role-based authentication / authorization and you can combine roles you need to be more flexible.

  Please visit the sites:

  1) http://www.youtube.com/watch?v=Xin98O-Q4JY

  2) http://www.youtube.com/watch?v=vOxcrEU_-Gw&feature=related

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/access_policies.html

  Kind regards

  Talal

  ==

  Remember responses of the rate that you find useful

  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find