VCenter converter Enterprise

Similar Questions

• autonomous vs Converter vCenter converter

  I would like to confirm something I am experiencing.   I have vCenter Converter installed as a module on our server vCenter4.    I tried to install Converter Standalone on my work PC and suddenly found that when I did this "uninstalled" vCenter4 converter    Does this mean that I can't use both?

  Does this mean that I can't use both?

  Yes, it's the same product.  I prefer stand alone, because you can export to VM Ware Server 2.0.  The enterprise Converter will be important only for ESX

  You can also install Converter Stand Alone as a client / server install which is nice, you can have a physical server do all the work and put the client locally on your laptop.

• Problemas al convert Máquina con fisica RHEL5 a virtual ESXi 3.5 en con vCenter Converter Standalone 4.0

  Buenas a todos,

  Tengo problemas al try convert Máquinas con Red Hat Enterprise Linux 5 a physical Office ESXI 3.5 U3 en Máquinas.

  El software used are el VMware vCenter Converter Standalone 4.0, that supone are compatible con RHEL5.

  In los pasos cuando estoy present, hay a unos paso in el that the das the IP y el user/pass del ESXi, pero veo has the right information that are compatible con:

  Supported VMware Infrastructure products:

  • ESX Server 3.0, 3.5

  • ESXi 3.5 integrated

  • VMware vCenter Server 2.0 or 2.5

  OS wonder if any ha intentado hacer lo mismo that yo y TR ha probado con el ESXi (embedded Sin ser el) y lo ha height, igual no y compatible are yo aqui intentandolo... aunque espero Québec no ASI sea.

  AA±ADO puedo conectarme desde el vCenter Converter has the Máquina física y sacar el tamano of disco, etc. y también al ESXi y ver las maquinas office as tengo, aunque cuando present will por el 1% me da UN FAILED.

  Gracias por vuestro tiempo

  Hola, Gonzo

  Me going to a perdonar, pero pienso than Sigüés having problemas por el comment mistake red.

  Need configurar el en the virtula machine assistance network. Te ayuda sacada del VMware Converter information Editor:

  During the conversion of the source physical machine running Linux, Converter Standalone creates a virtual machine to help on the destination host

  (VCenter or ESX). The virtual machine to help requires network access to the source computer to clone the source files. Apply the default conversion settings

  automatic acquisition of IP address and DNS server for the virtualmachine Helper. The following procedure to manually configure this network connection.

  Procedure

  1. on the view/edit

  Options page, click VM to support network.

  The network settings pane opens to the right.

  2. (optional) to assign an address select static IP the virtual machine to help, use the

  After the IP address: specify the IP address, subnet and default mask

  entry door. Don't forget the address IP that you specify for the virtual machine to help is not already in use on the network.

  3. (optional) to configure the server address DNS manually, select use the following DNS server

  address: type the preferred DNS server address. Possibly type and substitute the address of DNS server.

  4. Select another option to set or click next to view a summary of the conversion task.

  Converter Standalone uses the IP address and the DNS server specified to copy data from the source Linux machine to the virtual destination

  machine during the conversion.

  Saludos,

  Jose Maria Gonzalez,

  -

• VMware Vcenter Converter Standalone 5.1

  Bom dia, senhores, gostaria of Saber quem pode me informar wave download o Vmware Vcenter Converter Standalone 5.1, (tem as ser o 5.1) I can not find em canto some POI.

  Desde ja Agradea§o a resposta. Obrigado.

  Converter 5.1.2 supports UEFI, don't worry!

• VCenter converter error "host key < ip > cannot be found."

  Hello friends, how are you?

  I'm trying to convert a physical machine with Redhat 3 have the latest version of VMware vCenter Converter (5.5.3)

  On the machine with Redhat, I have disabled firewall, IP address as name solves well and are in the same network as the host.

  At one point, after target partition and format the disk on the server, I get the following error in the log:

  FAILURE: A general system error occurred:

  Network error. 192.168.0.142 host key cannot be recovered. (code 2 back)

  Can someone help me?

  Thank you very much!

  Solved friends, was a mine very stupid mistake!

  He put a different vm to support mask of the subnet of the vCenter.

  Everything solved!

• vCenter Converter - P2V migration without dedicated boot partition

  Hello

  I'm looking to migrate to a physical computer to my ESXi cluster with vCenter Converter but actually I got this following error message:

  There is no directory "/ boot", mounted on the source machine. It is necessary to create a virtual bootable. Mount the directory "/ boot" on the source machine.

  Is it possible to ignore this message? In fact, this server is in production and I don't have any space on my hard drive to create another partition.

  I would like to know if we can convert a physical machine to a virtual machine without a dedicated boot partition.

  Note: I had a folder/boot but mounted on my.

  If anyone has any advice on this subject will be useful

  Yes, in theory, you can. / boot directory under / is OK, but this error message is a bit misleading - I'd say converter couldn't recognize your * discs * and so no partitions mounted, so he couldn't find/boot as a separate partition or as a directory under /. You use some software RAID (md) on your source server?

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• Windows 2008 R2 VM disk system increased substantially after moving from VM to ESXi host 5.1 to 5.5 ESXi host using vCenter Converter Standalone

  Hello:

  I moved a Windows 2008 R2 VM from a 5.1 ESXi host to an ESXi host 5.5 using vCenter Converter Standalone.  The c: / drive system passed largely to where I now have to extend the volume.  Is this normal/expected behavior?  Perhaps the conversion/move creates temporary files I can delete?

  Thanks much for the ideas.

  This is not the expected behavior.

  Size of the disk is defined during the conversion and which will not increase by its own during conversion.

  Now, you need to V2V, if you want to reduce the volume.

• VMware Vcenter converter

  Hello

  I installed the software Vcenter converter in German on a computer Windows 7 Pro (64 bit) with 8 GB of RAM and a lot of disk space.

  I would like to convert an existing server to Linux (Ubuntu Server 12.04, near the production environment) in a virtual machine. I would like to 'play' with this virtual machine using VMWare player on another Windows computer in a test environment.

  However, in the German version of the converter, the following error message appears: "Die zur performance of Vorgangs wurde verweigert detonation. Which means roughly translated: 'authorization to run which was rejected. "

  I've specified the Linux machine with the IP address, gave to the root user and the respective password. I can access this computer via putty with root and password via port 22, I checked several times.

  What could be the problem?

  Thanks in advance and best regards,

  Frank

  Try opening VMware Converter using the option "Run as administrator" :-)

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• Preferred solution for P2V (vCenter Converter or VEEAM)

  I am analyzing and is about to convert a list of the physical servers in vmware VMs and I was wondering what is the best solution to use. Use vCenter Converter or VEEAM? I want to know what most people use out there and all the pros and cons with each of them.

  Thanks in advance.

  As far as I know, Veeam does not have any tool for p2v conversion. So, in this case, you'd better stick to VMware vCenter Converter. However, once the physical VMs remaining are converted, you will need something to save them. That's exactly where Veeam can become very useful for you.

  See you soon.

• vCenter converter 5.1 - just P2V to esxi 5.1 but stop virtual machine by iteself

  I P2V a machine using vCenter converter 5.1 and migrated to 5.1 ESXi host. If conversion/migration is finished without error. Now when I turn on the computer, virtual it stops up to the login screen and it goes on and on. Not able to understand what is happening. I veried resources assigned these looks good.

  Some successful how to enter safe mode. UPS service was guilty. Disabled it and also default actions has changed for this service of "Non-action" for all three incidents.

  No problems now and new virtual machine works very well without any problem

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Date of publication of vSphere vCenter Converter version &amp; version all all.

  Hi friends,

  Can someone tell me that the vSphere and vCenter Converter dates for all versions of publication? or where we can find in any VMware docs?

  Thank you!

  You can find these info to for example http://vsphere-land.com/vinfo/release-build-info

  André

• VMware vcenter converter standalone physical conversion to virtual stuck to the completion of 81% for several days

  Hello everyone I have an interesting question, I'm physical conversion to virtual pointing to the new virtual directly on the server esx conversion would set schedule for a day. But now, it's just stuck at 81% and not go further! I don't get any errors of ideas? questions are there a basis that I can look to see what is happening? Is there a way I can fix it without start over again. There are enough resources on the destination esx I had to change the hard drive space for destination and ram, but done nothing radical imprint more small which I think should do better.

  It's an interesting case, you have here. I guess that conversion is complete, but somehow you do not see or a deadlock occurred.

  Anyway you will probably be able to export logs to the customer. Go to the directory of newspapers to %ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs (for WP/W3K) or vCenter Converter Standalone\logs %ALLUSERSPROFILE%\VMware\VMware (for Vista +) and find the log of the last worker (vmware-converter-worker - .log #). The status of the conversion is currently connected. Take a look, or that she has finished, is still running, is stuck.

  If he has you can try restarting the client and/or server converter service. Do not stop the worker service unless you are sure that there is no conversion running!

  HTH

  Plamen