Very slow resume from hibernation.

Similar Questions

• Bug report: Power Manager causes performance slowed after resume from hibernation

  I use Windows 7 and several versions of the power manager, including the last 6.63.1 of a 220 X.

  If I Hibernate the computer, when I'm back, everything is very slow. For example, it takes several seconds for a page to display after clicking a tab in Chrome, but it's just an example, almost everything is unresponsive. This happens for about 5-10 min, but eventually everything will work normally. It seems to be related to the use of high page files. More I wait to take over after the hibernation, the biggest problem seems to be taking.

  The deactivation of the service to be able to eat has not corrected the problem, but after uninstalling the power manager, the problem will disappear completely.

  I've seen several reports of that of others. This person, it connects to Power Manager, but does not give many details.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unresponsive-after-resume-fro...

  This person is also connected Power Manager, but gives a description of how he did, which can be useful for you.

  http://asqueella.blogspot.com/2012/07/Windows-7-resuming-from-hibernation-is.html

  I have reinstalled Power Manager, because the computer is unusable after hibernation. I love the program, however, so it would be nice if you can solve this problem.

  Best wishes

  Justin

  Justin_KM,

  I have discussed this with the Power Manager team and they think that this problem can occur because of a feature called Fast Hibernation summary power manager.  The idea is that Power Manager will page out most application on the drive memory before hibernation.  Then the hibernation file will be as small as possible, resulting in a faster recovery time.  But I guess it can cause this side effect, you found if several applications are page in a lot of memory, disk, after sleep.  Then you would end up with the use of the disc heavy and slow application performance, until finally the memory is restored from pagefile.

  Anyway, if you want to retry Power Manager, please install the latest version and then apply this reg file to disable the feature that we believe that your problem is initially:

  https://DL.dropboxusercontent.com/u/62276273/DisableFastHibernationResume.reg

  Restart after applying the reg file.  This assumes that you are running 64-bit Windows.  If you are running 32-bit Windows, let me know and I'll give you a different reg file.

• White screen when resume from hibernation when the graph is active (DM4)

  I configured and purchased a HP DM4t with 512MB ATI Mobility Radeon (TM) HD 5450 switchable graphicst.  My problem is that when the laptop goes to sleep (for example when I close the lid), it will sleep for a while (I think his suffering at 6 p.m.), after which she'll take back and hibernate itself (hybrid sleep option).  I like this feature because it allows to save battery power, however, when I try to resume from hibernation when the ATI Radeon graphics card is active, all I get is a black screen.  I can connect using the fingerprint reader, (I hear Windows making the connected to the carillon), but I don't see anything on my screen.  If I do this same scenario using the Intel graphics card, I will not have this problem.

  I called HP tech support and their solution was to disable hybrid sleep feature.  I was not satisfied with this solution, because it does not save the battery of the laptop must sleep for a long time.  My solution is to disable auto graphics card change, and I just go to the ATI Radeon manually if necessary.  The problem with my solution is that it forces me to remember to turn off the discrete graphics when I'm actually (I tend to forget).

  Is there a solution to this problem that will allow me to use the gfx ATI card AND the hybrid auto sleep function?

  I was finally able to update ATI graphics driver on my laptop.  This seems to have solved my out of the hibernation problem.  The version of the driver that I'm on is 8.741.1.1000 with a date of version of 21/06/2010.

• The computer hangs after resume from hibernation

  I bought a gateway in 2007 with Vista Home Premium. Great hibernation worked until 7 months after a windows update (I forget which). Now, when I resumed from hibernation, it restarts and comes up with the screen asking me if I want windows to start normally or in safe mode, etc. Any ideas of what could be the cause? Also now, after I try to bring it from being asleep, the screen is black and the computer does nothing. I have to then it reboot. Thank you.

  Hello Mlhargrave,

  Thank you for posting.  I found the solution to the problem of you in a Thread here on this site.

  We found that sometimes the BCD file may have problems.

  You can try this to fix the BCD file.

  1. run CMD. EXE as administrator

  2. run the following command: bcdedit - enum all

  Search for "Summary of Hibernate" in the output of the command above (example below):

  Out of the hibernation

  ---------------------

  identifier {3d8d3081-33ac-11dc-9a41-806e6f6e6963}

  Device partition = C:

  path \Windows\system32\winresume.exe

  Windows Vista (TM) Enterprise (recovered)

  inherit {resumeloadersettings}

  FILEDEVICE partition = C:

  FilePath \hiberfil.sys

  PAE Yes

  debugoptionenabled No.

  3. Once you have found, copy the value of the identifier (in this example - {3d8d3081-33ac-11dc-9a41-806e6f6e6963})

  4. run the following command: bcdedit /deletevalue {3d8d3081-33ac-11dc-9a41-806e6f6e6963} inherit

  5. test of hibernation.

  Please let me know if this helps you.

  Zack

  Microsoft Answers Support Engineer

• Very slow email from El Capitan

  Apple Mail has become very slow since upgrade to El Capitan.
  When I click on a message that takes seconds to show.
  What can I do?

  This will be fixed?

  What other email application can I use?

  Please leave Mail runs. This procedure has no effect unless you leave Mail when you start.

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  sqlite3 L*/C*/*.mail/*/L*/*/*/C*.db vacuum; sqlite3 L*/M*/*/*/E*ex vacuum

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal (command-V).

  You should see a new line ending with a dollar sign ($) below what you entered. If this is not the case, press return. You can then quit Terminal and relaunch Mail. Test.

• Very slow computer from El Capitan 10.11.3

  I hope that someone can help you. My computer is very slow and unstable since the El Capitan 10.11.3 patch. I am on a MacBook Pro 15 "-end 2011. The computer is particularly slow in Safari, but was slower than normal as well. I backed up my files in Time Machine to an external drive before any troubleshooting, so I'm really happy about it. The person had me clear everything and go into recovery mode and reinstall the OS. After that I had problems with closing down and restart so I reinstalled again and just have not stopped since then. I don't him have NOT YET migrated all my files back and will not until I know that the system is stable. My laptop is functional but still just very slow. Can someone please help? I'm desperate! Thank you so much in advance!

  I ran a report EtreCheck about an hour ago and got this:

  EtreCheck version: 2.7.8 (238)

  Report generated 2016-01-26 15:28:29

  Download EtreCheck from http://etrecheck.com

  Time 03:10

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  Slow computer - recent issue since El Capitan 10.11.3

  Hardware Information: ⓘ

  MacBook Pro (15 inch, late 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  MacBook Pro - model: MacBookPro8, 2

  1 2.5 GHz Intel Core i7 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 309 - SN = D86139302X5DGDLAH

  Video information: ⓘ

  Intel HD Graphics 3000

  Color LCD 1680 x 1050

  AMD Radeon HD 6770M - VRAM: 1024 MB

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days

  Disc information: ⓘ

  Hitachi HTS727575A9E362 disk0: (750,16 GB) (rotation)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 748,93 (Go 728,47 free)

  Encrypted AES - XTS unlocked failed

  Storage of carrots: disk0s2 749.30 GB Online

  HL-DT-ST DVD - RW GS31N)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.printuitool.agent.plist [killed]

  com.Apple.RCD.plist [killed]

  3 the process killed the lack of RAM

  Launch system demons: ⓘ

  com.Apple.corestorage.corestoragehelperd.plist [killed]

  com.Apple.coresymbolicationd.plist [killed]

  com.Apple.findmymac.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  com.Apple.nsurlsessiond.plist [killed]

  [killed] com.apple.periodic - daily.plist

  com.Apple.printtool.daemon.plist [killed]

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  12 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  Items in user login: ⓘ

  Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000008.dropbox

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000001d.EtreCheck

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: Java 8 update 71 build 15 check the version

  Default browser: Version: 601 - SDK 10.11

  3rd party preference panes: ⓘ

  Flash Player [Support]

  Java [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  6% kernel_task

  6% WindowServer

  0% askpermissiond

  Top of page process of memory: ⓘ

  Kernel_task 520 MB

  Com.apple.WebKit.WebContent (3) 139 MB

  Overview of 115 MB

  Safari of 82 MB

  70 MB suggestd

  Virtual memory information: ⓘ

  240 MB of free RAM

  3.76 GB used RAM (1.01 GB being cached)

  40 MB used Swap

  Diagnostic information: ⓘ

  January 23, 2016, 22:08:07 self-test - spent

  You have enough RAM, add or reduce the number of simultaneously running programs.

  Try this:

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• Very slow SELECT * FROM table

  Hello
  could you please help me, that's why execution of
  Select * from myTable very slow (more than an hour and running)?
  Table has 2 GB, BUT the use of the disc is only 5%!
  
  When I execute select count (*) from myTable, usage is 100% and I have the result in 1 minute...
  
  Thank you.

  Please see the nets [url http://forums.oracle.com/forums/thread.jspa?messageID=1812597#1812597] when your query takes too long... and [url http://forums.oracle.com/forums/thread.jspa?threadID=863295&tstart=0] HOW TO: post a request for tuning SQL statement - model of accounting. Maybe comment by Sybrand on accounting for the new trace files needs a qualification, as the work through the normal steps of setting before posting the raw trace.

  I think you might have some misconceptions about the work of parallel processing how and what to KEEP. You can also consult the manual of Concepts on when things go in the PGA, and when they go into the CMS and find out how to see the use of the PGA. If you try to load the buffers of the SGA by making a parallel with full table scan, it won't, because this combination uses your PGA and multiblock reads to increase performance - negative in some cases, such as yours.

  In other words, you're [url http://www.doingitwrong.com/wrong/585_munkavedelem.jpg] made wrong.

• Upon resuming from hibernation my computer asks continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use?

  Original title: F8 and troubleshooting.

  After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.

  Recently, I had this problem.  This link above (http://support.microsoft.com/kb/294427) helped me.

  Basically, it seems to be a corrupted restore point created to go into hibernation.  I think that the system wants to remove that restore point and reboot "fresh."

  Restore data refers to a previous restoration or a restore point that was created for later use?

  
  

  A previous restore point.

  If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  
  

  If I understand you correctly, no.

  Hope this helps

  -Rich

• Windows XP Pro SP3, very, VERY, SLOW to the hibernation

  Reference Dell Lattitude D620, Windows XP Professional, recently upgraded from SP2 to SP3 & IE6 to IE8. 2 GB of RAM.

  Before the upgrade, "Fn + F1" = hibernation; the process took 12-13 seconds to complete.

  After upgrade, I rebooted Ad-Aware, Spybot S & D, Spyware Blaster, Malwarebytes, Avast antivirus. And added (again) the 'light' of CCleaner version.

  After the updates, the process of hibernation take 95-105 seconds to complete.

  Any suggestion to check/set appreciated.

  FL - Ron

  I see...  Let's look at something else now that we have this new information.

  If you are using IDE drives, use Device Manager to make sure the transfer mode for the IDE channels to something as DMA if available (depends on your hardware) and the slow PIO mode.
     
  PIO is the slowest, DMA is faster.

  It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

  To launch the Device Manager console, click Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

  Faster selection will be a kind of selection DMA (usually: DMA DMA5, UDMA, etc - anything but PIO).  If it is PIO, change it to DMA.

  If you are unsure of what you see after return of help and advice.
     
  Followed this with a reboot to ensure that any change stick.
     
  What may have caused the change?
     
  http://support.Microsoft.com/kb/817472

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• The computer hangs when resumed from hibernation

  Original title: my Dell Studio laptop has been extended in mood when arrested, on start windows hangs at «Windows resumes...» "how I reslove this issue?

  My Dell laptop Studio 1537, Vista Home Premium, was closed down in sleep hibernation oe.  When I try to restart windows crashes to the screen «Windows resumes...» ».  How to reslove this problem?

  Issue resloved by calling Smart Solutions from Dell 1-877-409-3272... Looks like you need start the computer, and then start pressing the F8 key until it brings Safe Mode, then let normal retart...  It worked for me...

  Hello

  1. were you able to get the problem solved?

  2 did you a recent software or changes to the material on the computer?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  See also:

  A Windows Vista-based computer stops responding when you resume the computer after hibernation

  http://support.Microsoft.com/kb/928135

  Hope this helps and provide us more information if you need more assistance.

• Very slow downloads from the clouds

  When the update and download of the cloud to adobe through the Viewer on iPad, downloads adobe are extremely slow and unstable, updates and verification of a nightmare.

  
  All the other functionality of the network is fine, it's only this trial and its large company, if at home or office.

  This is a universal problem? All the patches?

  Thank you!
  Steve

  Adobe is apparently having server problems. Other users have reported problems today.

  «Digital Publishing Services team is investigating the reports of failures of the editions.»  The teams are diligenty work to solve the problem. ", according to http://health.acrobat.com

• Windows 7 not resumed after Hibernation - tried all of the solutions out there

  I have a HP pavilion Dv6t laptop running Windows 7 Ultimate.

  -Intel i7 2670qm

  -8 GB ram

  -700 GB HARD DRIVE
  -AMD 7690mxt 1 GB graphics card

  The Windows is preinstalled with the laptop. This laptop has already had 4 primary partitions reserved by Windows and HP recovery disks.

  I need dual boot linux for development purposes, so I deleted one of the primary partitions. The partition that I deleted was the partition of 100 MB, I think, Windows uses to start and system for purposes of repair.

  After deleting the partition of 100 MB, I ran Windows repair and I started correctly in Windows. Then I installed Ubuntu and it starts very well as well. The boot loader is now the Ubuntu one, I don't assume the cause of the problem.

  Now comes the problem.

  When I put in hibernation in Windows, it hibernates correctly but using the Hibernate, I am presented with the message "Windows summary of Point of hibernation". I hit enter and Windows get stuck at Windows Startup logo. This can go for hours and hours remaining on the screen. I so force the shutdown of the laptop. Start the laptop I am presented with 2 options

  1. take out the point of hibernation

  2 remove the point of hibernation and continue to the start screen

  I select the option of delete will point and Windows starts but I lose all data saved with Hibernate.

  Please help me solve this problem! It comes to my work machine.

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to resume from hibernation.

  I will definitely help you with this.

  I suggest you go through the link below:

  Refer to the suggestion given by Naman R responded on December 23, 2011:

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/unable-to-resume-Windows-7-from-hibernation/dedc3a07-9c35-4C13-b96d-1cda877de449

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Recovery from Hibernation is very slow.

  Recovery from hibernation is very slow. It takes about 3 minutes to resume everything in just a minute, if I'm cold it starts. I have a desktop pc with all the drivers of the last update. I saw the event viewer, and there are a lot of mistakes in ' Application and service logs, Microsoft, Windows, diagnostic performance / operational. " I saw in the event id "300." There are a lot of mistakes, but it is not the culprit that is causing the error. Any ideas? I tried reseting the hibernation file. I tried to reduce my swap file, installed the drivers for my chipset, have a pretty good 7200 RPM hdd (I have a pc), 2 GB of ddr2 ram and a core e7500 2. But my problem is that my computer Hibernate in very less time but when resume after hibernation (no sleep) 1 min and 35S (windows 7 64 bit) when starting cold takes only 50 dry or slow. There is no open programs. Please can anyone suggest some ways? I have write caching on. My computer wakes up 6-year-old in 25 seconds (windows xp 32-bit)

  Why 4GB? Download the Web Installer and select only the Win32 development tools! This reduces the amount of downloaded files!

  You can also download the following tool kit:

  http://visualstudiogallery.msdn.Microsoft.com/en-us/e8649e35-26b1-4e73-B427-c2886a0705f4

  The Toolbox is only 100 MB to download.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Satellite Pro A200GE-1F9 may not resume from standby or hibernation with SP1

  Hello

  Details of the laptop: [my laptop: http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 131911]

  I recently used Windows Update to install SP1 vista on my laptop, but since this installation I can't resume from standby or hibernation. (Service pack has successfully installed - according to Windows anyway).

  At the resumption of his sleep, I get a blank screen.

  During the recovery from Hibernation, I receive a STOP error message: + Stop 0x0000008E (0xC0000005, 0x82F11020, 0x9A9D9714, 0x00000000) + caused by * Classpnp.sys*.

  After checking these forums, I have seen that Toshiba does not support SP1 + what is accurate? +

  + * If so when/how we will notify when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO? *. +

  Before installing SP1, I installed all the updates (from Microsoft and Toshiba) and had no problems; all the drivers are up to date.

  Thanks for any answers in advance.

  I guess that this happens because of a problem of compatibility between some pilots and SP1

  > After checking these forums, I saw that Toshiba does not support SP1 is that correct?
  Yes it's true.

  > If Yes, when and how will notify us when Toshiba released a "patch" for compatibility Vista SP1? I'm guessing that via personnel TEMPO?
  I think that there should be information on the Toshiba driver page, support page or we will receive some information of Toshiba through applications of Tempo.

  We'll see

• My iPad 2 is very slow.  I removed all unused applications and erased from history.  What can I do else?

  My iPad is very slow.  I removed all unused applications and erased from history.  What can I do else?

  A disclaimer clause.

  I make no warranty, express or implied, that my own procedures return EACH older iPad to a usable state, running.

  Try all of the following conditions:

  Try to reset all the settings in the settings under general app and in the right column under restore.

  Try stories reset and delete/reset the caches in all web browsers you use.
  If you use Safari, these features may be in the application settings under Safari.
  Other browsers have their settings inside the running application itself.

  If your iPad has been activated for iCloud, in the application settings under iCloud, to the right, under iCloud Drive, type in iCloud drive and make sure that Safari is off to save data from Safari to iCloud by car.

  Also, under iCloud in the application settings, in iCloud Drive, turn the feature off saving for all other desired apps DO NOT the data automatically on iCloud drive.

  If you are using Safari is always causing issues.
  Try changing / using web browser third another, different.
  I do not use iOS Safari too much more because I found it cause me headaches on some Web sites, regularly, to visit.
  I commonly use another third party browser, perfect browser (there are others that can suit your style better web browsing, so look all first to see what third-party browser may work better for you) and I have never experience many questions that Safari was originally.

  In the settings app, under the Safari settings panel, tap lightly on the Panel in the right-hand turn off / disable Safari Suggestions.

  In the application settings tab general, right under the spotlight sesrch, try disable the search under the applications who really don't need a research, as some games, remote controls, apps that are really useless to be searched, etc., in order to reduce the list to Spotlight search.

  Try to turn the reduced movement.
  This is found in the application of settings in the general tab, in the left panel.
  In the right panel, look under accessibility, look to reduce the Motion and turn this feature "On".
  You should see a significant performance increase on all models of iPad 2, 3 and 4.

  In the application settings under the general tab, in the right column, search background App update and enable this setting to "off".

  Try a reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!