VIA Vinyl HD Audio Deck jack plugged in popup

Similar Questions

• InterVideo WinDVR 3 on Qosmio G30-116 via port-> no audio video

  Hello

  I installed Intervideo WinDVR 3 on my Qosmio G30-116. I have connected a decoder for the Qosmio via the video Port for using the cable supplied Toshiba which provides a composite video cable audio two channels to affix the Qosmio. The video works fine but not the audio.

  Intervideo WinDVR 3 "Setup" see section when you select the "Device" tab on the video input is set to "Toshiba PCI DVB - T Tuner hybrid analogue" and hense video works. However, the only options under Audio input are the "SigmaTel Audio" and "Logitech microphone. I put it on "SigmaTel Audio" and under this setting, the only option for source is the 'CD drive '. These are therefore the setting but still no sound from my cable box.

  Any ideas?

  Any other proucts that someone knows of which allow you to use the video in Port of the Qosmio that work really (FYI I can't even make it work with Windows preinstalled Media Center.

  Concerning
  Stephen

  Hello

  Have you tried to use the Qosmio Player or MCE instead of the WinDVR 3?

  How to connect two devices?

  Insert the plug of the output cable to connect to the box set-top to the audio input jacks (Red: audio right, white: left audio) and video input (yellow) of the software component video cable plug-in connector.
  The video port allows you to import video data from analog video cameras or video recorders. To hear the sounds to use the video cable to connect the audio terminals of the device and your computer (Red: its channel right, white: his left channel)

  In the user manual, you will find the detailed how connect the set - top box for the Qosmio and what cables are required.

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• How to make my computer send all audio data via an optical audio cable instead of making headphones?

  Howdy,

  To listen to the radio online or CD played from my computer, I used to connect the computer to my entertainment system at home since the headphone jack of the computer to the port on my home entertainment system.

  Now, I wanted to get a better sound and bought the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the system entertainmeny home via digital cable optical, rather than by the headphone. If I just disconnect the cable between the headphone and the port to THE and have only the PC and the system connected with the optical audio cable, I can't hear any sound. I suspect that the computer is not sending the data through the optical audio port. I'm not able to figure out how I can adjust the settings on my computer so that, from now on, all sounds are emitted through the optical audio.

  (1) I want to do it especially for my desktop HP (configuration below) and advice on how to do this would be appreciated.

  (2) I also have a HP laptop (configuration below) and I was wondering if this would be feasible too (even if she does not have an audio output, but it has an HDMI output - you can convert audio optical?)

  Thanks in advance!

  My office is:

  WANT to h8xt,
  • Windows 8 64
  • 3rd generation Intel (r) Core processor quad-core i7-3770 [3.4 GHz, 8 MB of shared cache]
  • 12GB DDR3 1333 MHz SDRAM [3 DIMMS]
  • 1 TB 7200 RPM SATA hard drive
  • No secondary hard drive
  • 1 GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
  • 300W power supply
  • DVD SuperMulti burner
  • LAN wireless-N (1 x 1) card
  • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB 3.0 (top)
  • No additional desktop software
  • No additional security software
  • No TV Tuner
  • Beats Audio (tm) - a built-in studio quality sound
  • HP USB volume control keyboard and mouse with Win 8 keyboard
  • Adobe Premiere Elements and Photoshop Elements 10

  And the laptop:

  HP ENVY 15t Quad

  Hello @_goma,.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I read your post about how you want to send all the audio data via an optical audio cable instead of the headphone jack of your computer, and I'd be happy to help you in this case!

  To configure your desktop computer to activate the optical audio cable, I advise you to follow the steps below:

  Step 1. Click on the button of the Windows key on your desktop

  Step 2. Type "Control Panel."

  Step 3. Select "Control Panel" in the upper right corner

  Step 4. Select sound

  Step 5. On the Read tab, right click on the white box under available devices

  Step 6. Select "Show disabled" and "show disconnected devices".

  Step 7. Connect your Audio optical cable

  Step 8. Select your cable Audio perspective as the default device, and click 'enable '.

  Because it is not possible to convert the audio output HDMI output on your laptop, it is regrettable that the laptop is not able to connect with an optical audio cable.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• get sequential messages on audio input jack

  First a box with the speaker appears with the message "You just plug a device into the audio."

  then he stands up again with
  "You just unplugged a device to the audio input jack.
  He repeats these messages even with disconnected speakers.

  Hello

  1. what operating system is installed on the computer?

  2. What is the brand and model of the computer?

  3. you remember to make changes to the computer before this problem?

  4. you get this Realtek HD Audio Manager error message?

  Follow these steps:

  Method 1: Run the troubleshooter if you are using Windows 7
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: If you get this Realtek HD Audio Manager error message, you can try to disable the notification.

  (a) open Control Panel, select hardware and audio.

  (b) scroll down and select Realtek HD Audio Manager.

  (c) click the little 'I' in the lower right corner.

  (d) turn off the box "Show icon in the notification area.

  (e) double click on 'OK'.

  If this is due to a defective material, I recommend you contact the manufacturer of the computer.

• para that serve o via Bridge hd audio

  NAO sei como usar o via hd audio deck e para may serve. por favor resposta em Português (Brasil)

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page click v (English) in the United States and set on your tongue.

  I hope this helps.

• Now I get a message "you have just disconnected a device to the audio input jack," which causes the music stop and start

  Now I get a message "you have just disconnected a device to the audio input jack" quickly followed a message that 'you have just plugged a device in the audio." He then takes the messages. This translates to stop the music. I checked all the connections.

  Hello

  1. this happens when you plug in the headphones?

  2. this happens to you while streaming music online?

  3. when exactly you get this message?

  Please follow the steps mentioned below.

  Method 1:

  Follow the steps mentioned below.

  a. click the Start button.

  b. in the Start Search , type Device Manager and press ENTER.

  (c) in the Device Manager dialog box, click the Action menu, and then click find the hardware changes.

  Method 2:

  Please run the troubleshooter mentioned in the article below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

• Challenges of the audio input jack (seems not work)

  Hello

  I use an HP Envy 15-j030eb, running Windows 8.1 x 64.

  Recently, I need to use my laptop audio input jack to connect my speakers, but I don't get all the sounds. I tried to connect two different types of headphones, with no audio to come through. I don't remember really when I finally used, but I'm sure it worked at some point.

  Otherwise it is inserted into the Jack, I get his normal good through the internal speakers, connect a TV via HDMI also works very well.

  I tried most of the solutions I could find online (definition of default playback device, change the bass and treble levels, do a hard reset, reinstall the drivers...), but nothing helped. Start Notepad from a live USB Ubuntu USB also translates the same behavior; play music while my works of great internal speakers connection helmet muffles all. This leads me to believe that it is not a Windows/driver issue, but a bios/firmware/hardware one.

  Run HP (from usb boot) and the test of speaker adio also doesn't send audio signal to my helmet and gives a failure code: gll3kv-6nm782-mfgjxg-20ek03. I could not decypher this identifier.

  Any suggestions on how to proceed and get my audio jack working again please?

  Kind regards

  Klmdb

  Hi @klmdb

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your post about the problems with your audio jack. I looked in that identification code of the failure that you have posted and there is an audio hardware failure which could be a couple of different things, but from what you describe, it's the audio jack that has failed.  The audio jack is not a replaceable part, you will need to seek to replace the motherboard or card mother.

• Smartphones connect blackBerry storm to car Audio input jack

  My (new) Volvo has an audio input jack, I connected my storm with a standard stereo cable.  I played several songs on my way into work.  At noon, I plugged the storm back to find the storm no longer plays on the audio jack.  It's like the storm audio Jack does not recongize the connection, the songs through the speakers of the storm.  I ran a few tests.  The stereo headset supplied with Storm still works.  The cable and the plug of the car still work with other MP3 device.

  Why all of a sudden it does not?

  Does anyone else have this problem?

  And, Yes, I jumped the battery and restarted.

  Another point to add to my list, this phone is driving me crazy!

  It was my cable!

  Even if the cable has worked in another device, there be a small difference between the work cable and the non-working.

  How to remove this thread or mark the thread solved?

• Sound suddenly does not work but the bars audio always in movement. Windows 7 audio driver: VIA High Definition Audio

  I turned on my pc and tried not to watch a YouTube video when I realized there is no sound playing. I tried to play a video file saved on my pc, still no sound. tried an mp3 player and still no sound. everything worked very well 24 hours earlier. the green bar on the sound in the status bar icon moves when I play something, but I can't just release anything.

  motherboard: ASROCK N68C-S UCC
  audio driver: VIA High Definition Audio
  Windows 7 latest updates installed.

  I have spent 10 hours reading all over the internet and have done the usual troubleshooting:

  • system restore
  • Driver update (from disk as well as site)
  • try different audio jacks
  • using different external speakers
  • playback enabled devices
  • System speaker levels are full
  • active volume equalizer
  • used Microsoft Fix it Audio Playback, which is no problem
  • Run the audio Troubleshooter in Control Panel, no problem found

  I even reformatted and reinstalled windows, hoping it would be like, but it was useless because I still have no sound.

  can someone please help me find a fix for this.
  If a system format has not fixed the problem, im only left thinking that its edge is completely dead and I need a new sound card?

  Hello

  I imagine the inconvenience that you are experiencing.

  I suggest you refer to the section 'I tried all solutions here and still can get my sound to work correctly ' from the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Genesis 4 Apple Tv doesn't have an optical Audio input jack.

  I just replaced my generation 3 Apple Tv with a generation 4 Apple Tv.

  The Genesis 3 has an optical Audio input jack that I used to connect my Bose system.

  The Genesis 4 doesn't have it.  Now I can't audio through my Bose system.

  Any suggestions?

  Use something different? I have read there are some cards, but you are right, that the v4 of the Apple TV doesn't have an optical port.

• Deskto Phoenix 810-160 HP ENVY: optical audio output jack

  Just bought this new desktop computer and run the output through the optical audio output jack audio in my receiver, AWESOME!  Was wondering if I could connect an optical audio divider to this Jack and divided the audio output of the computer of TWO distinct receivers?

  Appreciate the work you people are doing at HP, have already ordered your suggestion on Ebay for less than $5.00 with free shipping.  I'll let you know if it works, my knowledge of electronics is not old enough to know if the signal from the optical output on my HP computer Jack is strong enough to divide and two stereo receivers to power without a signal amplification.  Thank you very much!

• How to remove missing references and audio files or instruments that popup at launch I need is no longer?

  How to remove missing references and audio files or instruments that popup at launch I need is no longer?

  For audfio missing files: go to the Project Audio Bin, mouse control select unused , and then press DELETE. And then click Save.

  

  Missing instruments or plugins, go to your mixer and remove/Exchange any plugins that have a '!"in all of their slot. And then click Save.

• my headphones (or headsets) does more work when plugged into the audio input jack

  I have a 2010 27-in. iMAC.   I am running Yosemite 10.10.5.   Recently I can't get audio on the audio jack that I always used with my helmet.  Have tried the other sons of contact as well as the apple earbuds.  Audio is great internal speakers.

  When you plug your earphones sound still come through the internal speakers?

  When you plug in your headphones, you see those as an option in preferences-> sound-> release system?

• No sound when the headset is plugged into the audio input jack

  When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

  Inspiron 15 series 3543

  Realtek HD Audio Device

  Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.

  [To return to the Realtek driver, do it again but reverse steps 2-7 names].