(Video tutorial), HP wireless printer installation

Similar Questions

• HP Officejet 6500 Wireless - printer installation failed to complete the

  I have the installation of the printer with a static IP address and a Linksys WRT310N router. I am able to connect wireless from a desktop running Windows 7 PC. Then tried to install on my laptop Dell also runs Windows 7, with software firewall disabled, but the Setup program does not complete.

  The measures taken are: run the add a peripheral Officejet icon from the desktop, select the wireless option in printers network found it shows my printer with the good IP and MAC, then I select him and click Next, run Network Diagnostics shows then goes to the installation of your screen of the printer. The green progress bar goes all the way through and says 100%, but then says "printer setup failed to complete. Clicking Retry done the same thing, then just closes but no installed printer.

  Help!

  Hello

  I had the same problem on my two computers to Vista (x 64) and 7 (x 64).

  I manually configured address (192.168.1.90) on my printer (OfficeJet Pro 8500).

  In part, I installed current drivers (OJP8500vA909_Full_14.exe), but had the same problem as you:

  the printer has been detected but not installed. I had the same helpful error ' printer setup failed to complete «...»»

  Strangely, I could open the printer info web page to my IP address (http://192.168.1.90), for the config network was good.

  Here is what fixed the problem for me:

  -Open the computer

  -Click on network

  -must be registered with your printer

  -Double-click it, and then click 'continue' if he asks you to do

  This will start an installation of the driver. When it is finished, try to rerun the original installer or click the icon that was placed on your desktop to complete the installation of the printer.

• Whenever I try to install the printer Lexmark Professional 6600 series wireless, but each time said the message of the printer installation failed.

  Tonight, I tried several times installation/connection to the wireless Lexmark Professional 6600 series printer but every time the printer message said installation failed.  Why?  What should I do to connect to this printer?

  Title: original printer Installation failed

  Hello

  Sorry for the late reply.  I find the user guide to use this device.  Check page 128 for troubleshooting wireless.

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/en.html

  What version of Windows are you using then I can move you on the appropriate forum?

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• Installation of a wireless printer

  I am trying to install a HP Photoshop wireless printer.  I tried to run the installation on my laptop with the Vista operating system with the HP cd and I get an error window stating "consent UI for administrative applications stopped working and was closed".  -What this means and how can I solve the problem?

  You normally do a right-click on the setup.exe > run as admin.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Video tutorial on Installation and Configuration Forms11gr2 (development and deployment)

  Dear Exparts

  Nice day.

  I'm going to install and configure (reports, webutil etc..) Oracle Forms11gR2 (11.1.2.2) for development and deployment.

  I want to make everything fine. So, before you start I want see tutorial for all this work).

  Can someone help me? (Team Viewer also available on request.) Video tutorial is the first choice.

  Thanks for your time.

  Ask2Learn

  Asked to know wrote:

  Thanks for the link.

  Can you please guide on the development and deployment?

  No patch needed/mendetory for the 64-bit version?

  Ask2Learn

  Hello Ask2Learn,

  Mode of development is fear that the characteristics of the development environment and mode of deployment is for most of the features of the production environment.

  Select any type and click Next and you will see the list. Web search for each components for more information.

  A few mandatory path for 64-bit according to the version of the OS.

  Please check support.oracle.com

  See also the list bit.

  

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• HP Pavilion Notebook - 17-f237: conversion to wireless printing

  Instructions for conversion to wireless printing seem to be up to Windows XP. I need the most recent which is Windows 10. Is there a site for this?

  I found this one. My printer comes with the installer for Windows XP/8. I was able to update the system from my computer at 10 and just found the link to the latest version online. Thank you.

• HP 4500 wireless printer: printer all-in-one cannot scan glass

  My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

  New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

  I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

  My system is Windows 7 64 bit.

  Please answer.

  Hello @rudetom,

  I would like to see if I can help you get your Officejet 4500 Wireless software working again.

  Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

  If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP 3520: printer installation

  I use wireless connections.  I have laptop Azus and laptop Samsung.  I have two printers, HP3520.  One is installed and can be used with portable Azus.  I want another printer to be used by other computers.  I'm unable to install.  Please notify.

  Hey @DDMogavero,

  Thanks for getting back to me on this subject. Because your computer Windows 8.1 is not 'see' your wireless HP Deskjet 3520 e-all-in-one when you try to "Add a printer" I will you have to make sure that your Deskjet is on the same network as your computer Windows 8.1. Can I please you follow the steps below.

  Step 1: Check of connectivity:

  1. tap Wireless on the front panel of your Deskjet:

  

  2. you should now see your IP address and SSID show. Please take note of the IP address.

  3. on your Windows 8.1 computer, open your internet browser. In the address bar of you please enter the IP address. Do not include the www.

  4. search this site. A Web site for your printer should now open.

  • If the site opens correctly: This proves with 100% certainty that your printer and your computer communicate on the wireless network. Please go to step 3 below.
  • If the Web site for your printer fails to open successfully: This indicates that your printer and your computer communicate wirelessly. Please check on your computer and that you are connected to the same network name SSID to which your printer is connected to. Do not connect to networks 'comments'. In addition, please do not connect to a connection of 5 GHz. Printers are supported only on the connections of 2 ghz. If you don't know what your router is broadcasting: 2 GHz or 5 GHz, you may need to speak with your router manufacturer.

  If your credentials wireless are good, but you are still not able to access the site of printers (browser EWS) follow the steps below.

  Step 2: Restore the network settings:

  1. Tap the down arrow on the front panel of your printer until you see Wireless
  2. Select OK in the wireless
  3. Down arrow to restore default settings and select OK
  4. Choose 'Yes' to restore the default values

  Step 3: Reinstall the device:

  Please have a loan for installation of USB cable because it is necessary for the wireless configuration. Do not connect the USB cable at this time.

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to install your printer
  4. Select the "Connect through a network"
  5. When prompted, plug the USB cable
  6. Once the wireless connection has been configured successfully you will be asked to disconnect the USB cable

  Test wireless printing.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• Could not get either of my PC to see my wireless printer

  Wireless printing

  I have a HP Pavilion desktop computer, a g7-2118nr Pavilion laptop and an HP Photosmart D110 printer. Teo computers and the printer are connected to my wireless router. I can't believe one of them to recognize the printer. So nothing will be printed. It works very well with the Deaktop if I cable to connect the two. Ideas please?

  If you have installed the full driver package, click Start > all programs > HP > HP Photosmart D110 printer (or whatever your folder) and search for 'Connect a new printer' or 'printer and installation software' (which will have a selection of "Connect new printer" inside). Click on that and let it search for your network. If it does not, you will be asked to connect the printer temporarily by a USB cable. Do it and follow the prompts. The installation program will tell you when to disconnect the USB cable, and then it should work perfectly.

  SC Tom