Installation of a wireless printer

Similar Questions

• After the installation of hp wireless printer does not work my mouse microsoft mobile wireless have updated drivers etc, but still does not work

  After installing the printer wireless Hp, my mobile Microsoft Wireless Mouse 1000 will not work. I'm running Vista 32 bit on HP Compac Presio. Have you tried various options such as uninstalling/reinstalling, running Microsoft Fix It that says changes to the hardware detected but it tell me how to solve this problem, and MFI does not generate a report for help.   All USB ports working.  Can someone help me?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• 10.8.3 OSX don't rest not in mode "sleep" after the installation of the wireless HP4620 printer

  I installed the HP4620 wireless printer, now OSX you waking up from his sleep after about 15 minutes, it didn't happen until I installed the HP4620.  So I opened a terminal and did a search for why the printer wakes up, the result was:

  Wake up the reason: GLAN HDEF EHC2

  I couldn't find any information about it, so I turned off and unplugged the printer, then turn on the computer sleep (which "now takes about a minute to sleep), now OSX wakes up after 45 minutes. So with the printer off and it's wake up yet, I think it must be something to do with the HP software installed?

  Does anyone else have this problem?  Any suggestions to correct sleep would be appreciated.

  Thank you

  Thanks for the reply but reset the SMC did not work, I have reinstaled 10.8.3 OSX then the printer and sleep works again.  Forgot to mention, I am running a Hackintosh on a Gigabyte H77N-wifi Board but never had any problems with sleep or HP printers, it not was not up to what I have installed the HP4620 sleep has become is down with insomnia.

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• HP5740e all-in-one: Deputy HP5740e Print will not add wireless printer

  I recently had a problem where printing of pdf documents is out as unreadable solid ink lines. I have it narrowed down to only occurs with specific policies and only a reader of pdf special and only on my hp printer. I suspect that this was due to software updates, but I don't know if it's windows 10 updates or updates of adobe or some other updates. Now I just avoid using the fonts of the problem.

  In any case, an attempt to solve this problem, I decided to uninstall my 5740e hp software and reinstall the software in the hope of resolving the problem. Unfortunately, it has not fixed the issue but left us with a problem even more serious.

  Having resinstalled the software I couldn't add my printer as a printer wirelessly from the HP Print Wizard. He added fine as a usb printer and a web printer but not wireless.

  I added the printer wireless via the windows & Panel devices configuration printer OK. It prints wirelesslessly and via printing web so physical connectivity is very good.

  I really want that he recognized by the HP Print Wizard so that I can scan from the office.

  When I go to add the printer as a wireless printer, it detects the device OK showing its ip and mac, then goes on the installation of the printer and comes back with the unsuccessful installation of the device, and shows the red x between the router and the printer.

  Any ideas? It was working fine until I reinstalled the printer software.

  Another way to scan office without using the HP print wizard?

  All assistnce solve will be appreciated.

  Hi @Phlipper

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?
  
  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
  
  Let us know if it works!

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• HP Pavilion Notebook - 17-f237: conversion to wireless printing

  Instructions for conversion to wireless printing seem to be up to Windows XP. I need the most recent which is Windows 10. Is there a site for this?

  I found this one. My printer comes with the installer for Windows XP/8. I was able to update the system from my computer at 10 and just found the link to the latest version online. Thank you.

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• HP 4500 wireless printer: printer all-in-one cannot scan glass

  My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

  New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

  I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

  My system is Windows 7 64 bit.

  Please answer.

  Hello @rudetom,

  I would like to see if I can help you get your Officejet 4500 Wireless software working again.

  Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

  If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• Could not get either of my PC to see my wireless printer

  Wireless printing

  I have a HP Pavilion desktop computer, a g7-2118nr Pavilion laptop and an HP Photosmart D110 printer. Teo computers and the printer are connected to my wireless router. I can't believe one of them to recognize the printer. So nothing will be printed. It works very well with the Deaktop if I cable to connect the two. Ideas please?

  If you have installed the full driver package, click Start > all programs > HP > HP Photosmart D110 printer (or whatever your folder) and search for 'Connect a new printer' or 'printer and installation software' (which will have a selection of "Connect new printer" inside). Click on that and let it search for your network. If it does not, you will be asked to connect the printer temporarily by a USB cable. Do it and follow the prompts. The installation program will tell you when to disconnect the USB cable, and then it should work perfectly.

  SC Tom

• How to connect a USB-wireless printer to a wireless network without PC

  Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

  The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

  Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

  

  Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

  Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

  

  When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

  Enter the network password if necessary and click Next.

  

  A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

  

  After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

  

  Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

  I hope this helps.

• Cannot connect Windows XP to the wireless printer.

  WINDOWS XP PRINTER WI - FI CONNECTION

  I have Windows XP Media Center Service Pack 3 OS that worked a HP Photosmart Plus B209 a - m with a USB cable.  Since I just bought a new laptop (Windows 7 Professonal OS) I decided to create a home network with a router Cradlepoint MBR 900.  The two laptops (XP and 7 OSs) were connected to the internet via the router with no problems.  Windows 7 Pro OS laptop is connected wireless to the printer Photosmart Plus, I had implemented as confiquiration wireless the printer first.  But the failure of the attempt to get the OS Windows XP Media Center to connect to the wireless printer.  During the installation process to connect the printer to the XP system wireless it asked me to choose which printer I wanted to connect to.  The Photosmart Plus printer was selected and visible, then I clicked Next.  Shortly after, a small screen appeared stating the "serscan.sys" file could not be found and I have to insert a Windows XP Pro CD to get the file or run the installer of this file.  This issue has occurred both when I tried to install it with the CD provided by HP and when I tried installing the HP download website.  All I have is a recovery for Windows XP disk provided with the laptop and not a CD Windows XP Pro.  What should I do to fix this?  Thanks, Lonnie

  Thanks, that was fast.  Please, let me make sure I have this correct.  First of all, I have two recovery disks provided with the computer, with Windows XP Media Edition and one for the drivers.  I should not use either of these disks, right?  If I had the previous correct answer then let me ask the following question;  When looking to borrow the disc should be Windows XP Media Edition or can I borrow any disk of Windows XP?  Kim Merci for your help continues.  Lonnie

  Lonnie,

  Before the hunting around for friends who might have a CD, do the following research.  For each of them, make sure that you have checked the search options in the 'Advanced Options' to

  • Search system folders
  • Search for files and hidden folders
  • Search subfolders

  Search your entire hard drive and both CDs you have to serscan.  Do not include the .sys at the end of the file name.

  Search for Driver.cab.  Report of the Office (s).  On your hard disk, you should find one or both

  • C:\Windows\i386\Driver.cab
  • C:\Windows\Driver Cache\i386\driver.cab

  You can also find these files on the "recovery disk".

  Report what you find, including locations of found nothing.  It is possible (but I don't think likely) you will find a file named serscan.sy_ - If Yes, include this information in your results.

  Or, if you want to ignore all this, you can download serscan.sys since my SkyDrive-->

  https://SkyDrive.live.com/redir.aspx?CID=18b259158254905b&RESID=18B259158254905B! 225 & Thierry = 18B259158254905B! 214

  The file should go to C:\Windows\system32\dllcache (a hidden directory) and probably in C:\Windows\system32 (I do not use this file, if it is not in my system32 folder).

  Or you can just save it to your desktop and "direct the Setup" it there (if you do this, check more later to confirm that he got into C:\Windows\system32\dllcache and if not, put a copy).

• Wireless printer will not print

  I downloaded a printer wireless with the disk successfully.  It is listed under programs, but it is not listed under fax machines and printers available, so do not print.  After installation it says that everything was finished and complete.  Any suggestions?

  Hi TerrifWright,

  Please answer a few questions to refine the question.

  1. What is the brand and model of the printer?

  2. what happens when you try to print? Do you get any error messages?

  3 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  This problem normally occurs when the printer is not compatible with the operating system. We will analyze and identify the cause of the problem.

  Method 1:

  Run the troubleshooter, and proceed as described in the article.

  Solve printer problems

  Method 2: Uninstall and reinstall

  You can uninstall the printer completely go Add / Remove Programs & then try to reinstall and see if the problem still occurs.

  a. because you used the CD supplied with your printer, you can download & install the software of the printer from the manufacturer's website.

  b. connect the wireless printer on the computer. Make sure the printer is powered before you continue.

  c. click on Start menu > settings > Control Panel > printers and faxes.

  d. click on "Add a printer" in the navigation bar on the left under"Print jobs." "Add Printer Wizard" will open.

  e. follow the wizard until you reach the page 'local or network printer"and choose"printer local... "or"a network printer. Choose the basis on the question of if the printer is connected directly on this computer or a print server or other computers on the network.

  f. type the wireless network password, if prompted. The Printer Wizard can also ask to install drivers to print before the final connection is made. If you receive this prompt, click 'Yes'.

  g. close the wizard when you get to "Finish."

  See also:

  To add a printer attached to your computer
  To install new or updated printer drivers to update
  Hope this information helps. Response with status so that we can help you.