Vim object reference not found

Similar Questions

• I get "error number 0 x 80040706 Description: object reference not set" while trying to install Empire Earth 2

  Original title: error number 0 x 80040706 Description: object reference not set

  I can't install Empire Earth 2 on my PC because of this error. It is not the disc and I have no drivers up to date. I've tried every suggestion I could find but nothing works. Help!

  Its OK, I found the problem. I recently downloaded EMET 2.0 so I checked it and replace the recommended settings and it worked. I don't know why he did just made even though I thought EMET should only apply to internet explore?

• object reference not set

  I have a .net web service.

  I checked via the web service that it works correctly.

  Here is the SOAP 1.2

  POST /WebServices/MarketingWebServices.asmx HTTP/1.1
  Host: sdasapprdsvr
  Content-Type: application/soap+xml; charset=utf-8
  Content-Length: length
  
  
  http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
    
      
        string
        string
        int
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
      
    
  
  

  I get error "the server could not process the request. --> The object reference not set to an instance of an object"

  My code base to set up the soap request

  m_soap.setAction(hostServer + "/" + serverAction);
  m_soap.setHost(QUrl(hostServer).host());
  QtSoapMessage request;
  request.setMethod(QtSoapQName(serverAction, hostServer));
  
  request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("AssociateEmail"),QString("[email protected]")));
  request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("ShowName"),QString("print2013")));
  ....
  
  m_soap.submitRequest(request, endPointURI);
  

  I tried to addMethodArgument without the Type of SOAP

  That is to say.  request.addMethodArgument ("myParameter", "", "myValue");

  I tried to use a struct as shown in another post.

  QtSoapStruct* inputValues = new QtSoapStruct(QtSoapQName("Items"));
  request.addMethodArgument(inputValues);
  QtSoapStruct* item = new QtSoapStruct(QtSoapQName("Item"));
  item->insert(new QtSoapSimpleType(QtSoapQName("Name"), "_OS"));
  item->insert(new QtSoapSimpleType(QtSoapQName("Value"), "BB10"));
  inputValues->insert(item);
  

  It seems as if the arguments are not be attached to the request.

  I was getting an error that it lacked the required fields for the stored procedure.  So I adjusted the .net web service to set default values if the values sent via the web service were empty.  This moved me to the common mistake.

  So, apparently, it was matter of double.

  The first problem was in the client code:

  First of all, I needed to make sure that the parameters passed were in the correct order.

  Second, I found that the addMethodArgument was the right way

  request.addMethodArgument( new QtSoapSimpleType(QtSoapQName("AssociateEmail"), query.value(0).toString()));
  

  The second problem was with .net code.  I needed to make sure that the passed value is not zero.

  if (AssociateEmail == null || AssociateEmail == String.Empty || AssociateEmail.Trim().Length == 0)
                   { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", "No Associate Email")); }
                   else { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", AssociateEmail)); }
  

  And I had to make sure I have done this for each parameter.  Apparently, I sent a couple of empty values, and this caused the shot to the top.

  However, the return value is not always in the best format, but that's another thread.

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Several return orders exception 'object reference not set to an instance of an object.

  Don't know what I'm doing wrong here.  I'm reuse a code that worked fine on another system, but basic stuff does not work on this system.  Although some things work.

  For example, I can run new-virtualportgroup.

  PS C:\ > new-virtualportgroup - vSwitch10 - VLanId 2502 virtualswitch - name vSwitch10VLAN2502

  Name key VLanId PortBinding NumPorts

  ----                      ---                            ------ ----------- --------

  key vSwitch10VLAN2502 - vim.host.PortGroup - vSwi... 2502

  And I can see the new portgroup created in VSphere.  But if I then try to get-virtualportgroup...

  Get-virtualportgroup-name vSwitch10VLAN2502

  ERROR: Get-VirtualPortGroup: 09/01/2015-17:44:03 Get-the VirtualPortGroup object reference not set to an instance of a

  ERROR: object.

  ERROR: line: 1 char: 21

  ERROR: + get-virtualportgroup < < < <-name vSwitch10VLAN2502

  ERROR: + CategoryInfo: NotSpecified: (:)) [Get-VirtualPortGroup], VimException)

  ERROR: + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.GetVirtua

  ERROR: lPortGroup

  ERROR:

  ERROR: Get-VirtualPortGroup: 09/01/2015-17:44:03 Get - VirtualPortGroup VirtualPortGroup with the name ' vSwitch10VLAN2502

  ERROR: "was not using the specified filters.

  ERROR: line: 1 char: 21

  ERROR: + get-virtualportgroup < < < <-name vSwitch10VLAN2502

  ERROR: + CategoryInfo: ObjectNotFound: (:)) [Get-VirtualPortGroup], VimException)

  ERROR: + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.G

  ERROR: etVirtualPortGroup

  Several other cmdlets are behave the same way.  I got lost.

  VMware ESXi, 5.5.0, 1331820

  VSphere version 5.5.0 build 1369380

  PowerCLI v5.5.0.5846

  VIX v1.12.1.3346 (installed with PowerCLI 5.5 bundle)

  May be the issue.

  Try to assign an account domain (provided that you use a domain account), at the root of the vCenter Administrator role.

  Just to check if it works like that.

• Error "Object reference not set to an instance of an object" when you try to use a disk with vSphere Client

  Hi all

  I searched exhaustively positions but found no answear that.

  I'm trying to access a virtual disk that is free (no machine not in use now).

  For this purpose, I am went to a virtual computer, then clicked on edit settings - & gt; Add hard drive - & gt; use a disc

  Then, when I am prompted for the disk, I select it and click ok.

  When I click on 'Next', you will receive the following message:

  Object reference not set to an instance of an object

  (it seems really in Spanish: Referencia an object no set como UN instance object)

  And then the next button appears as non-cliquable.

  Any suggestions?

  It could be related to the .NET Framework, so I write here the versions I have currently installed:

  .NET framework 2.0 SP1 LanguagePack

  .NET framework 2.0 SP2

  .NET framework 3.0 SP1 language pack

  .NET framework 3.0 SP2

  .NET framework 3.5 SP1

  All this with the patches.

  Thank you in advance for your help!

  Juan J.

  PS: I found there was information about the lost pilots and VSphere Client. I already changed those:

  %RootDrive%\%ProgramFiles%\VMware\Infrastructure\Virtual infrastructure Client\Launcher

  Where I copied libeay32.dll and ssleay32.dll

  I would then watch the logs on the ESXi console.

  Re-create the error, and then search for log entries that appear at the same time.  That should shed more light on what could be causing it.

  Good luck!

• Object reference not set to an instance of an object

  After the opening of the "Microsoft SQL Server Management Studio" for SQL 2012 and tries to connect to the server, I get this: reference object not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)

  

  

  Can someone HELP me please? I'm VERY NEW to this...

  Thank you for your time!

  Install a service pack sql or sql to reinstall or repair. Something must have erased part of the installation, it has not installed right or he needs a SP for SQL.

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/b04f3626-87f8-475D-8277-276efb6b4cac/object-reference-not-set-to-an-instance-of-an-object?Forum=sqltools

  It is a forum for windows users. I post a question on this forum, it will be more useful, because they treat of this

  Good luck

• Fatal error. Object was not found.

  Hello

  I built aninstaller package that includes:

  3 x .exe

  LabVIEW2009 Dev Environment

  VISA Runtime Environment

  NOR-DAQmx

  When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

  At soon inadvance, Alec

  .\Distribution.cpp(320): IInstallerError 10002
  Fatal error. Object was not found.
  class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

  I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Message = "Object reference not set to an instance of an object."

  I was running my site Visual studio in mode on the local computer and everything worked very well. I added something to your cart, then it looked as if we'd send her to the last step before you check out through paypal and I closed it. That must have caused a problem because after that, when I tried to open another page, I get this message:

  System.NullReferenceException was unhandled by user code
  Message = "Object reference not set to an instance of an object."
  Source = "App_Web_iy6hza-b".
  StackTrace:
         at ASP.controls_shoppingcartbox_ascx.__DataBind__control4 (Object sender, EventArgs e) in c:\A_Taurus\Controls\ShoppingCartBox.ascx:line 14
  to System.Web.UI.Control.OnDataBinding (ByVal e As EventArgs)
  to System.Web.UI.Control.DataBind (Boolean raiseOnDataBinding having)
  to System.Web.UI.Control.DataBind)
  at System.Web.UI.Control.DataBindChildren)
  InnerException:

  And when I've debugged, it stopped in the code of the controls/ShoppingCartBox.ascx and gives to this line in yellow:

     
    
       
          
          
           < %="" #="" eval("title")="" %="">- < %="" #="" (this.page="" comme="" basepage).formatprice(eval("unitprice"))="" %=""> (< %="" #="" eval("quantity")="" %="">)
          
  
              
    

  And debugging box States: NullReferenceException was unhandled by user code.

  Object reference is not set to an instance of the object.

  It gives then a few suggestions like the use of 'new' somewhere but I don't know where I would put that or if it would help.

  Help please!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Exception of the UI by clicking provisioned resource... Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found

  Hi all

  Under the tab accounts for a user, whenever I click on the resource brought online, I get the following error on the user interface.

  Messages for this page are listed below.

  Houston-25003: LDAPUserForm1VO object of type View object is not found. Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found. oracle.jbo.NoObjException: Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found. Localized message is not available.  Error returned is: oracle.jbo.NoObjException: Houston-25003: LDAPUserForm1UD_LDAP_GRPVO object of type View object is not found.

  I understand that LDAPUserForm1UD_LDAP_GRPVO is the name of the child form to the resource of the LDAP user. While they inspected the child form, I find this design console.

  
  

  LDAPUserForm1VO is the form created for the LDAP instance. SDM export shows that this exists in the location "oracle\iam\ui\runtime\form\view\pages\mdssys\cust\site\site\LDAPUserForm1CreateForm.jsff.xml".

  
  

  In addition, if I try to create a new form for this Instance of the Application, it fails with the exception:

  
  

  • oracle.jbo.NoDefException: Houston-25002: definition of the type of the view definition sessiondef.oracle.iam.ui.runtime.form.model.LDAPUserVersion6.view.LDAPUserVersion6UD_LDAP_ROLVO is not found.

  
  

  
  

  While I can see the error, I'm not able to find a solution to what for what is absent and where!

  Clues from anyone, which was faced with this or at least help troubleshooting would be great.

  -Thank you,

  Def-ender

  If your sandboxes have the elements of form generation on the side of the administration of the system, then most likely you have replaced a sandbox created after the publication by a prior created sandbox which does not contain the information from the form in the file CatalogAM.xml. I think that's the name. To oracle support site, there are best practices sandbox offline that you can search. I'm restoring your mds changes and then recreate these forms and publish every sandbox in order before new forms are created.

  -Kevin

• Object reference not set to an instance of an object on Win 7 IE8

  I get the error message "Object Reference not set to an instance of an object" when looking at VCM / SCM 5.2.1 glancing all summary views as OS / "Machines" or whatever it is in compliance. Usually I see it on a poor observance of run that contains no data.  The full grid view works OK.  The equalizer of graph search progress bar flashes then the view is cleared and just object reference bad.  Reports SSRS based including those with graphics seems OK as a summary of the data on disk but the same in the interface user Web, disk space / readers get the error message.

  This happens on IE8 and Win7.  I used IE8 on XP and it worked OK.

  Have you checked to make sure that your Pop Up Blocker is turned off?

  How do you access the VCM Console?  By its IP address?  Host name?  FULL DOMAIN NAME?

  I have just rant in a problem where PUB was causing havoc on some, not all, summaries node.  I would check there first.

  SRS is capricious, when it comes to access the VCM Console, if you want to ensure your are accessing your Bowser with the same naming convention that you used during the installation of VCM.

  Post back with an update if you don't mind.

• Colon, causing a "the requested object is not found on this server" error

  I have a Description field that is defined as a text box, its game to maintain up to 4000 characters and works perfectly, but if the user enters a colon: in the text and tries to save changes, or navigate to another page, we get a "the requested object was not found on this server" error. If I update the field through SQL, it updates very well.
  
  Please let know us in this moment test phase of the customer. Thank you, Laura

  When you close a thread and mark, you must assign points to correct answers...

  Thank you

  Tony Miller
  Webster, TX

• Together-NetworkAdapter - object reference not set to an instance of an object.

  Guy.

  I moved a bunch of virtual machines to a group that had a vSwitch Standard to a cluster that has a distributed vSwitch. Now I'm banging my head against the wall with this one. I thought that the code below would work but I get a message

  All-NIC

  Object reference is not set to an instance of an object.

  What I'm doing wrong here?

  --------------

  SE connect-VIServer SERVER1

  $OldNetwork = 'EU VDI ILIO network storage'

  $NewNetwork = 'EU UCS VDI Port Group (VDI Desktops - VLAN148).

  Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq $OldNetwork} | Together-NetworkAdapter - NetworkName $NewNetwork - confirm: $false

  Strange... it works for me, but I used double quotes and I have no spaces in the names of dVportgroup:

  $myNetworkAdapters = Get-VM wintest1 | Get-NetworkAdapter -Name "Network adapter 1"
  myVDPortGroup = Get-VDPortgroup -Name "v4094--BLACK_HOLE"
  Set-NetworkAdapter -NetworkAdapter $myNetworkAdapters -Portgroup $myVDPortGroup
  

  Try with oneliner (sorta, that you always need myVDportGroup variable):

  $myVDPortGroup = Get-VDPortgroup -Name "EU VDI Workstations PortGroup"
  Get-VM Test| Get-NetworkAdapter -Name "Network adapter 1" |Set-NetworkAdapter -Portgroup $myVDPortGroup
  

  If repeated failure, please provide an output of command "get-member" against your variables (gm is an alias):

  $myNetworkAdapters|gm
  $myVDPortGroup|gm