Vision Version 5 replication (acucobol)

Similar Questions

• vSphere 5.8 and 6 replication

  Hello

  I'm running a vCenter 6 on a site and my secondary site a vCenter 5.5

  I would like to know if I can connect with replication of vSphere. I know vrm 6 is not compatible with vcenter 5.5 and 5.8 vrm is not compatible with vcenter 6

  But vrm vrm-compatible 5.8 6?

  THX in advance for the answer.

  Cyril

  The only support is to upgrade your vcenter seconday to 6.0, and then upgrade your VRM on this site to 6.0/6.1

  * vSphere 5.8 replication only supports vCenter server 5.1 to 5.5

  * vSphere 6.0/6.1 replication support only vCenter Server 6

  * vCenter Server 6.0 Update 1 supports only vSphere 6.1 replication

  I've only seen problems when leaving a VRM on an older version of replication failures, connections between interrupted VRM and so forth, I don't think that same mixed VMware supported versions of VRM.

• Don't vSphere replication create control points which can be selected during the failover?

  Don't vSphere replication create control points which can be selected during the failover?  Or is the latest version of replication, the only option to failover?

  Thank you

  -MattG

  No, this isn't

  You CAN do this with EMC RecoverPoint (although not on a per VM level).

• Oracle eBusiness Suite Vision Forum - personal use

  Hello
  
  I am a total newbie to this site but am hoping you can give me some advice (apologies if I posted this topic in the wrong place). I'm hoping to break into the Oracle functional world in the coming months / years after having been the company drive on a recent company Oracle Financials implementation that I work.
  
  Instead of simply to read manuals, I want to do a practical training. After doing some research, I see there are on the market of products that offer an instance vision of Oracle installed on a hard drive. I was planning on buying one of them to install home and practice at my own pace.
  
  Can anyone confirm if there is a justified reason why I shouldn't go ahead with this? My understanding is that as long as I use it to train at home, it must be correct. I want to just make sure that these products are legitimate.
  
  
  
  Thank you
  Philippe

  Instead of simply to read manuals, I want to do a practical training. After doing some research, I see there are on the market of products that offer an instance vision of Oracle installed on a hard drive. I was planning on buying one of them to install home and practice at my own pace.

  Can anyone confirm if there is a justified reason why I shouldn't go ahead with this? My understanding is that as long as I use it to train at home, it must be correct. I want to just make sure that these products are legitimate.

  There should be no problem in buying one of these laptops with Oracle E-Business Suite already installed. However, if you download and install Oracle E-Business Suite yourself, you are supposed to use the product for free (evaluation) for the first 30 days, then the product license - https://edelivery.oracle.com/

  Beacon solution offers free access to the 11i and R12 Vision demo instances. To use these forums, you must have a valid CSI number. You can access 11i and R12 Vision demo instances via the following links:

  Vision version 11i instances
  http://www.solutionbeacon.com/tools_r11ivision.htm
  Instances of Vision Release 12
  http://www.solutionbeacon.com/tools_r12vision.htm
  If you have a valid CSI number and you are allowed to use Oracle E-Business Suite so you can go ahead and get one of these instances of pre-installed vision demo.

  For questions/requests on Oracle license, contact your Oracle representative, it is best to answer these questions.

  Thank you
  Hussein

• AVT Guppy 033 B device is the same image twice on the < Session Out > event: Frame made

  Sometimes the event gets the same image twice, but with an increase, correct the image of the index (see photo index 125, 126).

  We use a type AVT Guppy 033 B firewire camera to measure the distance between plants. The camera fires all 40mm the breakpoint of the NI7344 of motion control output.

  We work with the latest Labview and Vision version 8.6.1 could the firewire driver cause this problem. We use the original driver

  Microsoft XP, SP3. Should install us the driver of the TRA instead, other suggestions?

  Thanks for any help.

  

  

  Syn66,

  Looks like your code without taking into account the fact that the Images are passed by reference. It seems that you still spend the same image GetImage and then put it in your queue. Each iteration you will be overwrite the content of the image of the singular and all the elements in the queue is pointing to the same data of the image.

  If you want to structure your code like this, you'll probably want to create an image of each iteration of the loop, call GetImage use it and then put it in the queue. When you treat it and get out of the queue, you can then destroy it. You can optimize the image allocate/free sentence (which may or may not be meaningful) with a strategy of ping-pong by having a separate queue images empty and then you delete the images of this queue empty, GetImage to use and place it in your existing queue of images to process. After the treatment, instead of simply releasing them you would put them back in the empty queue.

  Hope this helps,
  Eric

• Group Policy does not apply on Windows 7 with the Windows 2008 R2 domain controller

  Trying to troubleshoot a GP associated question where, seems, desktops (Win 7 Enterpise) do not receive the last group policy.  He doesn't seem to get at some point after an arbitrary time period (two or three weeks), but it is insanse.

  -Have you checked with the GPMC (connect to each domain controller individually) that all four domain controllers are running the same GP later version; no replication errors.

  -No errors appear on the workstation or server logs (logs\winlogon or event viewer-> Group Policy).

  -gpupdate/force runs without error

  -gpresult and RSoP both supplement fine, watch the GP is be applied correctly, to APPLY THE OLD GP SO!

  -No error up with whent the following undocumented debugging is also enabled: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Diagnostics] "GPSvcDebugLevel" = dword:00030002

  So, my little finger tells me that the problem is the GP are not be tire/replicated/either at the workplace in a timely mannger (reboot, gpupdate/force, etc.) but do not know how to see what is the interval, troubleshoot, etc.

  The server gurus hang out more in the TechNet forums.  This forum deals with questions of security of user, your question would be a better fit in the server instances:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Version of LabVIEW for Vision Builder AI 2012 plugins

  Hi all

  II was a little challenging to find out what version of LabVIEW has been necessary to develop customized Vision Builder AI 2012 plugins, I found it by starting the installer, LabVIEW 2011 (but I wish I could find this information in the Readme of Vision Builder AI 2012).

  Now my question is: is it possible to use LabVIEW 2011 SP1 to develop plugins for Vision Builder AI 2012?

  Right... I tried, I installed all versions VBAI and LabVIEW, I could.

  I turns out LV 2011 sp1 is just an update of 2011 and so LV2011 SP1 can be used to develop customized Vision Builder AI 2012 plugins.

• using vision screws of the earlier version of VDM

  I need to support applications that have LV2010 with the Vision Development Module 2010 while my development PC a VDM, 2012.  The VDM developers are frequently new versions of IMAQ functions AND for some reason, changing the name of the function.  For example, this new version of VDM has a 2 excerpt from IMAQ instead of extract IMAQ.  Why change the name of this function?  It causes headaches for those like me who support several versions of LV and VDM because as much as I know, NEITHER did not leave the old IMAQ extract to a folder of compatibility where necessary.

  In retrospect, I probably shouldn't have left the VDM 2012 updated 2010 LV Installer (I think it may have been an option to turn that off, I'm not sure), but at this point, except a bunch of UN-installing and installation, is it possible easy for me to bring back some functions of VDM 2010 as IMAQ extracted to my installation of LV2010?

  Hello DrMike,

  Please use our forums. I can certainly understand the frustration with these changes, especially when it comes to support and use several versions.

  The good news is that you can indeed find and use these previous functions. They are just hidden in the palette of functions, but can easily be accessed and used by entering the library of Vision and access to libraries of .llb. Please refer to this article in the knowledge base for more information on the location of the functions.

  Your desired function will be located in C:\Program NIUninstaller Instruments\LabVIEW xx\vi.lib\vision\Image Manipulation.llb

  Where xx represents the version number of LabVIEW

• trial version vision acquisition software

  I would try the purchase Vision software before ordering it. Is there a trial version?

  Here is the download of the software.

  Vision acquisition software

  The software should work for 30 days before he asks you to activate.

• replication with different versions of vSphere vSphere

  After reviewing the matrix of interoperability of products, everything "looks" good, but caring for a second opinion.  See below:

  Environment:

  • vCenter 6 sites
  • PSC external sites
  • Protected site is vSphere 5.5 Update 2 or 3
  • Recovery site is vSphere 6.0 U2
  • vSphere 6.1 replication
  • 6.1 SRM

  Issues related to the:

  Can anyone confirm the support in regards to the different version of vSphere protected and recovery site?

  Are there related shades to have different versions of vSphere protected and recovery site?

  We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem?

  Different versions of vSphere are supported to recover protected site and as you have configured, it is recommended to have the new version on the recovering site. The reason for this and be careful about the different versions, has to do with the versions of virtual equipment. VMware ESX can run VMs with earlier versions of virtual hardware, but not later (came out after the version of vSphere). You want to make sure that your virtual machines will run on the host on the recovering site. If you are using a later version of vSphere to recovery, as long as you deploy new virtual machines when running it, or if you do this, you use a virtual hardware version that is compatible with the hosts what was your site protected, you will never come across the problem of trying to recover a virtual machine with the hardware version that is incompatible with vSphere.

  Issues related to the:

  Can anyone confirm the support in regards to the different version of vSphere protected and recovery site? -Yes

  Are there related shades to have different versions of vSphere protected and recovery site? -See above

  We can successfully failover to the recovery site, reprotect VMs to protected site and be restored in a site protected without problem? -Yes (see above)

  Does make sense?

• replication target versions support vSphere

  Hello

  I could not find if there is limitation between the versions of the unit of replication when I defined the target sites.

  I am creating the target between 5.8.1.10254 2915556 build and 6.0.0.1 build 2718739, it gives a generic error.

  Y at - it limitation?

  Jonathan

  Hello

  With all the RV releases so far, for vCenter for vCenter replications, VRMS version must match the source and target site (only this configuration is officially tested and supported), for example:

  1.0.x <->1.0.x.

  5.1.x <->5.1.x.

  5.5.x <->5.5.x.

  5.6.x <->5.6.x.

  5.8.x <->5.8.x.

  6.0.x <->6.0.x.

  6.1.x <->6.1.x.

  For vCenter to vCloud Air DRaaS replication, there is no such restriction.

  For the two vCenter vCenter and vCenter to vCloud Air DRaaS, based on source ESXi version target VR version features and different replication server are supported.

  Kind regards

  Martin

• replication between different versions of ESXi vSphere

  Hi all

  Is it possible to use replication between different versions of ESXi vSphere? the scenario is as follows.

  Source site:

  vCenter 6

  RS 6

  Replication Unit 6

  5.5 ESXi

  The target site:

  vCenter 6

  RS 6

  Replication Unit 6

  6 ESXi

  I understand that vCenter, SRM and VRA must match and vSphere replication 6 is compatible with ESXi 5 upwards and it is the vSphere host in the source location that replicates on the VRA rather than a host of ESXi target so it should work, but I wanted a certain Yes/No.

  Thank you

  Definite yes.

  VMware product interoperability matrices

  

• Adapter replication storage EMC RecoverPoint with 10 K version 2.1 of the VMAX is necessary

  Dear Sir

  Someone has the link of version 2.1 for adapter replication storage EMC RecoverPoint with VMAX 10 K because I couldn't get it and version 2.2 is not compatible

  Emergency aid pending

  Founded from EMC support

• BDB support BLOB replication in the next version?

  Present BLOBs are not supported for environments configured for replication. That would be fine this BLOB replication support tables. BLOB table replication is in the roadmap?

  Replication of BLOBs is on the roadmap for the next release.

  Lauren Foutz

• Could not load file or assembly %27NationalInstruments.Vision%2C Version%3D10.0.35.101%2C Culture 3Dneutral %2C PublicKeyToken % 3D18cbae0f9955702a % 27 or one of its dependencies. The system cannot find the specified file.

  I'm writing a .net application that references the dll of NOR.  I can make a reference to the dll of and access to objects that are, but when I run my app and try to run the code in the dll I get an error "file not found".  I tried to run Visual Studio as an administrator but that has no effect.  I can run applications example provided with the software NOR very well.

  Visual Studio 2008, .net 3.5; Windows 7 operating system

  Thank you.

  Changed the build to x 86 and let's roll.