Vista clean install a blue screen of death

Similar Questions

• Driver vista Power State failure Blue Screen of Death

  Please help me I think it's that I'm doing this... What is going on.. I have replaced the ram and video card, but has seen this problem before I did it... also just reinstalled windows vista... Please help https://skydrive.live.com/redir.aspx?cid=7cbac7e09f2ecb07&resid=7CBAC7E09F2ECB07! 105 & Thierry = 7CBAC7E09F2ECB07! 101 & authkey =! AEE_idLDpolnFKY

  Hello

  Those showed all CAUSE as a Windows component that means something different it led into error.
  Then ZIP or RAR the actuall minidump files and download them on SkyDrive and post a link here for us
  to analyze the other.

  Check this KB:

  The shutdown process does not terminate and you receive an error message on a computer that is
  running Windows Vista or Windows Server 2008: "Stop 0x0000009F"
  http://support.Microsoft.com/kb/972109

  ----------------

  You use Roxio or Nero programs? They have been known to cause this problem even
  If they worked well for a long period of time. If so check with their support.

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This "might" be a power problem, even if this isn't the most common cause - in this case
  It seems that the PSU could be the fault.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F<-- read="" this="">
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  ==========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

  original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

  I get the BSOD, and they are different every time.

  I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

  So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

  What is my RAM? My drivers? My hard drives?

  Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

  You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

  This issue is very very irritating and has ruined a lot of my work.

  Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

  What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

  Well idk I hope it was my problem. We'll see.

• Blue screen of death on install 2012

  Hello:

  Well, I 'upgraded' to 7 XP by doing a clean install of 7 by formatting
  my 1 TB harddrive (release 7 told me I don't have a real version 7)
  ... was informed that I had to leave portions of XP on the drive for 7 may
  find it...

  Well, even when I try to reinstall XP results in the Blue Screen of Death (BSOD)
  just like XP tries to run during installation.

  I even have the BSOD when trying to reinstall 7...

  I also tried the Ultimate Boot CD, which translates as the BSOD.

  What I did... Well, since all THE facilities result in BSOD
  I removed everything except a Memorystick (origin 8 GB in)...

  I also disconnected the SATA hard drive and connected to another
  SATA connection... yet of the results in the BSOD.

  ANY help to put Windows on the computer would be most appreciated!

  John

  Hello:

  Well, I 'upgraded' to 7 XP by doing a clean install of 7 by formatting
  my 1 TB harddrive (release 7 told me I don't have a real version 7)
  ... was informed that I had to leave portions of XP on the drive for 7 may
  find it...

  Well, even when I try to reinstall XP results in the Blue Screen of Death (BSOD)
  just like XP tries to run during installation.

  I even have the BSOD when trying to reinstall 7...

  I also tried the Ultimate Boot CD, which translates as the BSOD.

  What I did... Well, since all THE facilities result in BSOD
  I removed everything except a Memorystick (origin 8 GB in)...

  I also disconnected the SATA hard drive and connected to another
  SATA connection... yet of the results in the BSOD.

  ANY help to put Windows on the computer would be most appreciated!

  John

  Hi all:

  I want to thank you zigzag, delicate, davieeee and everyone else who helped me solve this problem...

  After repartitioning and formatting the hard drive, I was able to get Windows 7 installed - but with
  the error Code.

  Just got off the phone with Microsoft and they have righted the mistake of product code and activated the software, so I'm now running!   Will probably never understand that
  the problem was with XP... but I'm now running with Win 7

  Thank you so much people

  John R
  Pennsylvania

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• Installation of Powershell 2 on Windows Vista causes Blue Screen of Death

  I tried to install Powershell 2 on my Windows Vista Home Premium (with SP2) machine. I use the Windows6 package. 0-KB968930-x 86.msu. However, in the middle of the installation, I get a blue screen of death, and the computer restarts.

  I don't know if it is a help, but the problem report displayed when the machine came back to the top is as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 1000008e

  BCP1: C0000005

  BCP2: 00000000

  BCP3: 8FB3DB9C

  BCP4: 00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini073110-01.dmp

  C:\Users\Martin Lee\AppData\Local\Temp\WER-142803-0.sysdata.xml

  C:\Users\Martin Lee\AppData\Local\Temp\WER25F6.tmp.version.txt

  Hello CodeMunger,

  You can post on the Forum of Microsoft Powershell. Click here for a link to the forums.
  They may be better able to help with your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help in installing Windows 7 - blue screen of death error

  Hi all.

  I bought my new laptop yesterday and I tried to install Windows 7 Ultimate on it, installation is fine, but when it comes to the "Complete the Installation" part, the screen flashes once and I see the blue screen of death. I know that there are no hardware issues or disc problems.

  The laptop that I bought is a Toshiba Satelittle L50 - B - 11 c and the version of the BiOS is 1.40 if necessary.

  Is it preloaded with an existing version of Windows already?

  You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  Resources:

  http://support.Microsoft.com/kb/2832566

  Return the laptop if it came preloaded with Windows 8 and purchase one already preloaded with Windows 7, they are always available:

  http://www.ZDNet.com/where-can-you-find-a-PC-running-Windows-7-7000013418/

  How downgrade:

  http://www.PCMag.com/Article2/0, 2817,2417359,00.asp

  Backup before reinstalling Windows 7:

  http://techingiteasy.WordPress.com/2012/10/29/how-to-backup-your-Windows-8-installation/

  Follow step 1 to 5 in this tutorial:
  Downgrade from Windows 8 for Windows 7

  That follow this tutorial: (uEFI-mode Setup).
  Installation of the Dual Boot - Windows 8 and Windows 7 or Vista

• Safari gave me a blue screen of death, calling the Microsoft blue screen of death after installing Adobe flash player. The van is responsible for me to a Microsoft third-party technical support I did not trust anyone at - he had a problem with Adobe flash

  Safari gave a blue screen of death after downloading Adobe flash player do not have access to in-house. Big sign telling me that my computer from Microsoft was blocked and to call this number that was, according to the individual, I spoke, a third party provider working for. Microsof. Everyone knows this. I do not trust them especially when they declared they wanted to log into my calculation. Is there one resolution other than OS X Recovery?

  There are hundreds of these sites to scam out there. Nothing has been installed on your Mac, or even downloaded to. The goal of each of them should Miller get so much money that you're ready to spit. Good thing you cut them and not give them access to your Mac.

  The usual simple solution is Force Quit Safari. Hold down the SHIFT key, and then restart it. The SHIFT key tells Safari don't not to load the previous sites.

• Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

  Stats:

  Computer type: HP-Pavilion a6333w

  Product #: KC746AA #ABA

  Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

  Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

  Disk space: 500 GB

  RAM: 3 GB

  Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

  ---------------------------

  Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

  Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

  I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

  None of these online solutions have worked.

  ---------------------------

  Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

  If there is a way to save the info on my HD it please let me know.

  Thanks, Jcubed.

  Message edited by Jcubed on 11/12/2008 18:06

  I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

  http://support.Microsoft.com/kb/946084

• Installed the network updated drivers hp support page now I get the blue screen of death

  Installed the network updated drivers for my laptop hp support page and now I get the blue screen of death a few minutes of Internet usage.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5171...

  I can reboot the computer, but it only works for a little bit before again becoming the blue screen.

  I tried to download and reinstall the hp 8 drivers network twice now. (Product number: QJ793AV-#ABA)

  I am running windows 7 (x 64) and downloaded all the updates as well.

  Any help would be greatly appreciated.

  I made an another windows update and seems to be ok for now

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Blue screen of death 0 x 00000024 (0 x 00190444, 0 x 00000000, 0x870FF5E0, 0xc0000102) using Vista, poster at startup and no longer starts. Does not start in SafeMode either. Any ideas of how fix?

  Possibly a hard disk failure.

  http://msdn.Microsoft.com/en-us/library/ff557433 (v = VS. 85) .aspx

  Try to run diagnostics from the manufacturer if you can.