Vista not waking after sleep

Similar Questions

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• Safari not responding after sleep

  Whenever I open my MacBook Pro after sleep, Safari unresponsive. It won't let me not normal quit, or even force them to leave. It just sits there with the colorful, beach ball until I have turn off, by pressing the power button. I tried clearing history and hide, but to no avail.

  I am running OS X El Capitan worm. 10.11.4

  MacBook Pro (retina, 15 inches, mi 2014)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  Thanks in advance for any input.

  1 click  in the menu bar and select "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• LAN not working after sleep

  When I turn on my computer,
  after sleep mode it can not connect
  to the internet via LAN, up to what I
  Restart the computer

  Don t know what laptop you have, but compare the BIO son you laptop computer with the version of the BIOS on Toshiba page.
  If there is a newer version try to upgrade the BIOS.
  But be careful. Don't forget that you have downloaded the good BIOS and you are using the correct procedure to update the BIOS.

  Incorrect BIOS may damage the ROM or the Board of Directors.

• Display MX30 satellite will not work after sleep or resume - SOLUTION implementation

  Below I give an answer to this question asked by Eddy_Stock in 2006. I would like to thank and can't get in touch with.
  HIS answer is below and I hope it helps someone who has the same problem... wow... cured!

  Re: Satellite M30X: screen doesn't work after sleep mode

  I had the same problem with a satellite A100. I did the following:

  1. go in Control Panel
  2. in the system select Classic view
  3. go to the Hardware tab
  4. Select Device Manager
  5. open the 'USB bus controllers' (via)
  6 double-click on USB root hub
  7. Select the tab: "Power management."
  8 deselection allow the computer to turn off this device to save power
  9. my computer has several USB root hub. I repeated at 07:54 for all
  10. I rebooted the computer, but do not know if this is necessary.

  After that, the problem was gone. Enjoy

  Thanks for sharing this info with us

  I think that you thread and the solution could help other users with similar problems

  Thanks again

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however

• Windows Mobile 8 turns is not on after sleep.

  I have a Haier laptop with windows 8 is installed. Few days back my laptop got problem with mode 'sleep', it might be light not after sleep and I had to stop it to turn it on. This time after sleep, I tried to turn it on, but it has been set for the auto repair, after some time it says "Your PC couldn't be repaired" with options like system restore, refresh, reset, guest... Whenever I turn on the same process repeats... Now what should I do? Any suggestions?

  Since your laptop now Windows 8 OS, you will have an error "the inserted media is not valid" when inserting it with Windows 8.1. To get this fix you are trying to insert the media Windows with Windows 8 OSrecovery or installation. Then, try to update your PC or reset your PC. Otherwise, you must reinstall Windows 8.1 with your media recovery instead of use the refresh or Reset.

  Kind regards

• Mouse and keyboard does not work after sleeping on a laptop

  After awakening from a sleep of my laptop, my keyboard and mouse went crazy, pushing buttons at random on the screen, beep and completely freeze then both. I restarted my computer and got to the login screen which I was able to type in, then he connected and the keyboard and mouse do not work. I plugged in a USB mouse and the mouse that works very well. After some playing around, I got the keyboard works by accessing the control panel and change the speed at which the keys type and for some reason, this fixes the keyboard. However, I am still unable to get the mouse works.

  So three questions, 1 - what happened in the first place? 2 - why my keyboard was working to connect, but not once it really connected? 3. How can I get my mouse back?
  Thank you!

  Hi NicoleWood,

  You can read the folloaing articles and see if it helps.

  The problems of wake the computer from sleep mode

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Hope this information is useful.

• Monitor does not return after sleep.

  When my computer is in sleep mode and I come back to it, the monitor does not.  A message stating that he'll be back in the mode 'sleep', and the only way I can get to come is to manually restart the computer by holding the power button flashes.  The problem seems to get progressively worse - sometimes taking a quite awhile to come back even after rebooting.  I disconnected and then reconnected all the plug-ins and that you have completed all the recent Norton checks available to me.  Any ideas on why it is past, or better yet, how to fix?

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Photosmart 5520 will not feed after sleep

  I just bought the HP Photosmart 5520 and connected via USB to my computer (under Windows Vista Build 6002). I tested all the functions (print, scan, copy) and they work fine. Only problem is that after a period of inactivity, the printer starts 'asleep' and no amount after you have pressed the button On / Off he wakes. I have to resort to pulling on the power cable to the back and reinsert, then the printer starts. I see that others have had similar problems, but I see no solution. Looks a little basic features and base so why is this a problem?

  I'm about to pack and bring it back to the shop. Can anyone help?

  Thanks in advance

  I have now received my replacement of HP printer and it works as it should which is when he goes to sleep, you can wake him up by tapping the button On / Off on the front panel.

  I had a little problem because when he goes to sleep and you submit a print job, the printer does not automatically wake up and I had to press the power button to start printing. I followed the advice of Mulespinner about disabling automatic start/stop and this morning I sent the first print job to the printer "awakened" and fine print. My printer is connected via a USB cable.

  Thus, it has been a bit of a trip since I posted my original message (October 15, 2013), but everything works as it should be now. So, if you encounter the problem initially reported by myself and Mulespinner, the only solution is a replacement printer.

  About HP, the hard bit was getting to them that there was a problem, but once that has been established, the replacement option went like clockwork, and it's a good printer.