VM Studio 2.6 - VM, construction error

Similar Questions

• I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  In general, when the desktop software uses Flash Player, it's because they're incorporating an Internet Explorer window in the application.  If you do not have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop app is not going to work.

  Then, launch Internet Explorer

  Go here: http://get.adobe.com/flashplayer/

  Follow the prompts and then relaunch the application after you have completed the installation in Internet Explorer.  I hope this sorts for you.

• Visual Studio from Microsoft run time error hr:80090003

  live messenger installation with all others * after a crash. received the messege: (run time error hr:80090003 microsoft visual studio) how do you solve the problem?

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
   
  http://windowslivehelp.com/product.aspx?ProductID=2

• Visual studio just-in-time debugger error a WIN32 unhandled EXCEPTION has OCCURRED in EXPLORER. EXE [3167]

  "This exception failed with the following error in the debugger, just-in0time im get an error reading": no installed debugger has just-in-time debugger enabled, then close the windows and restarts when I try to open documents on drive c or when I try to open the files on my external hard drive. MY QUESTION, WHICH I GUESS IS WHERE TO GET A DEBUGGER OR HOW TO FIX THIS ERROR? THANK YOU GUYS

  Hi MICHAEL68VR,
   
  Follow the suggestion given in the post below to resolve this issue:
  Disabling Visual Studio 'Just In time Debugger"

• Visual Studio 2010 Side By Side error invalid XML syntax

  I spent much of last week trying to research and make changes of trial and error to solve this problem, and nothing has helped. I am full of ideas. I get exactly the same results on all programs, on which I worked in Visual Studio. I also had it on Visual Studio once, forcing me to have to reinstall Visual Studio to correct.

  The question:

  I have just published a new i7 Windows 7 x 64 system base to replace my old system of Windows 7 x 32 i3. They both have the latest patches and the latest .NET until 4.5.2. I also use Visual Studio 2010 with all the patches except service pack 1 (although I tried at a time with the service pack and it made no difference). I also tried 4.6.1, .NET and it made no difference. This new system is brand new, with very little installed outside Microsoft Office, SQL Server 2012 Management Studio and Visual Studio 2010, Windows 7.

  For these past years, I've worked on 6 programs different here (so far), and we use TFS for source code control. On the new system, I lower the code and it compiles properly for all solutions. I can run the programs of many times without any problem and the event logs show any problem of their execution.

  Then, after restarting the system, none of the program will run. When I try to run one of them, I get immediately a dialog modal system indicating that the application has failed to start because its side-by-side configuration is incorrect.

  When you look at the event log, I always get the following error next message:

  Activation context generation failed for "[program]". Manifest error or the folder policy "[program] .exe." Configuration"on line 1. Invalid Xml syntax.

  NOTE: replace [program] with the path + name of the given program.

  I use the system generated 'by default' unmodified manifest files. I tried to review them and files config in XMLNotepad, and no problem was indicated, except in the manifest, he noted that the first schema referenced file assembly.adaptive.xsd which was not anywhere.

  When you review the configuration file, the line in question is:

  The original line of the app.config from which it is copied is:

  If I remove the encoding = "Windows-1252" part, the program runs without incident, although .NET puts the right encoding of part in the first run. I tried to put the udf-8 coding and .NET simply replaces the encoding with the above value at the start of the program. After a reboot, it is unable to run again for the same reason, until I have change the configuration again. This isn't a solution long term for production code!

  If I change the project settings and disable the Click Once security settings and set the project do not generate a manifest, then he works constantly (several tracks to try again and several restarts without incident). However, I use Click Once to deploy updates, so it's not a useful alternative to long term because at the time wherever I try to publish to Click Once, it changes the security settings of full trust automatically and generates a manifest, triggering the problem even once. This also causes the advertised program with the same problem for everyone who gets the update.

  These programs all compiled and ran on my old system without incident, even after multiple system restarts. They also have deployment click once without problem, and the click once deployment took place without incident.

  It is as if .NET does not recognize the encoding "Windows-1252". And, since the only real difference between my old and new systems is the former is x 32 and the new is x 64, so I think it has something to do with the x 64 version. But that is only a guess.

  My new system is essentially unusable as a system of development because of this problem at the present time.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Studio EN - grid Insert gives error 11.1.2.3.500

  Hello

  I installed 11.1.2.3.000 EMP and then applied the patch pour.500.  Everything works as expected.

  I try to access EN studio and create a new State, and then insert a grid and it throws me error like below.

  

  any help will be much appreciated.

  Thank you

  KP

  Hi PK,.

  Try to re - record EN the associated DLL files:

  1. On the computer where EN Studio is installed, navigate to the folder\products\financialreporting\install\bin
     Run the HRRunAnt.cmd (run as administrator). This will re - save the EN the associated DLL files.
  2. Connect to studio EN and opening of the test reports.

  Try to open the client EN Studio with run as administrator and check the issue.

  You can also check for full access (admin) love the Studio EN installation folder user

  Also check the file both client HReports.jar EN Studio and machine EN server are the same.

  Kind regards

  Harish.

• The HR Studio 11.1.2 installation error

  Hi all
  
  I am facing a strange problem when installing client HFR in my local machine...
  Previously I had HFR V_9.3.1 and completely, I installed and I allowed the control panel and deleted all temporary files taken and all the tings necessary... but then I am installing HFR V11.1.2 is not allowing me to install and always to the poster I'll have HFR 9.3.1 installed on my machine...
  
  ERROR:
  Financial Reporting Studio Client
  
  Status: EPMINS-01016: impossible to install the selected component. Click Help in the Possible reason
  
  Reasons:
  
  Blocker: EPMINS-01048: cannot install a selected component. See the troubleshooting gameFor more information
  
  Concerning
  Vijay

  Have a search on the machine to vpd.properties, if find you it, then rename or backup and delete, then try again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• FPGA memory during construction errors...

  I am building an FPGA application for a sbRIO-9636. I just added an element of memory to act as a circular buffer.

  The element of memory is the size of 414000 U8 points. When I build, I get an error in the status of compilation window that starts like this.

  «LabVIEW FPGA: compilation failed due to an error of Xilinx.»

  Details:

  ERROR: sim - user configuration exceeds the number of BRAM in the selected device

  ERROR: sim:963 - initializer property intellectual could not set the basic model IP IP settings

  ERROR: sim - user configuration exceeds the number of BRAM in the selected device

  ERROR: sim - could not initialize the IP model.

  ERROR: sim - generator execution failure of Tcl.

  ERROR: sim - failed generation 'ReallyLongUniqueName_ReallyLongUniqueName '. Failed to run generator for Tcl.

  ERROR: sim:877 - error detected during execution of intellectual property "block memory generator v7.3.

  Release 14.7 - Xilinx CORE Generator P.20131013 (nt) Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.

  I have attached the error any reading.

  Help, please!

  I just realized why I see this error. The sbRIO-9636 comes with 2 088 kbits of RAM block. I missread the quantity in 2 088 kbytes of RAM block, me wanting to use 414000 bytes will not work.

  Thanks to all those who are looking into that.

• Construction (error internal.llb) .exe error

  Hi all

  I have built many exe, but for some reason, this one is hard!  I get an error that says:

  Error 1003 has occurred at \\Rochester\mtp\Test Rigs\NC4\NC4 Air Cap\Code Development\Air CAP v2.0\exe\internal.llb\Air v2.1.vi Rig inspection Cap

  I spent reviewing the many forum posts that suggest that one of sub vi is not executable.  The main and all vi the subvi will be running in the labview environment.  I tried a forced compilation and even a massive compilation.  All to nothing does not.  This problem occurs on two different PC and build other similar thin vi, so I guess it isn't a problem with the manufacturer.

  I'm using LabVIEW 7.1, 8.0 Vision and IMAQ 3.5.1: see attached report for good measure.

  Can you help me?

  If you need to sub that VI let me know.

  Dan

  See the solution here: http://forums.ni.com/ni/board/message?board.id=170&message.id=360001#M360001

• New construction, error 80072EE2

  I built a new computer with all new parts, installed win 7 on a disk I bought for another computer. I'll reuse a key that is located on another computer, which will be decommissioned. I only managed to install 3 updates. I think that this has happened during the initial installation process. I skipped the product key page, because I know that already; 1 PC, 1 key.

  I get 80072ee2 error whenever I try to update. I tried resetting IE, nothing. I tried to disable some things non-windows. Nothing. I tried to install the current version of Internet Explorer from a flash drive. It is not equity. Same thing with firefox. I could only shoot to the top of google.com and hotmail.com once. Other pages say "not found". I have a network connection and the internet.

  I have re-installed windows. Nothing.

  I realized part of my problem. Whatever the reason for the port on the router/modem ethernet didn't work well. I've loaded my cd to the mobo drivers and used my wireless connection. After that, it worked like a champ. Problem solved.

• Construction error suggested adding to the linker

  I'm adding some xml SOAP may app.  I'm following the example of xml SOAP as close as possible.  When I compile the application, I get a non-descript "Error 2" and "error 1".

  In the console, the last lines are

  make[1]: Entering directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  make -f Makefile.Debug
  make[2]: Entering directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  qcc -Vgcc_ntox86 -c -Wc,-include -Wc,o-g/.obj/TabbedProject -Wno-psabi -lang-c++ -fstack-protector -fstack-protector-all -g -Wno-psabi -Wall -W -D_REENTRANT -DQT_NO_IMPORT_QT47_QML -DQ_OS_BLACKBERRY -DQT_DECLARATIVE_DEBUG -DQT_DECLARATIVE_LIB -DQT_CORE_LIB -DQT_SHARED -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/share/qt4/mkspecs/blackberry-x86-qcc -I../../TabbedProject -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4/QtCore -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4/QtDeclarative -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4 -I../src/qtsoap -I../src -Io-g/.moc -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/freetype2 -I. -o o-g/.obj/main.o ../src/main.cpp
  qcc -Vgcc_ntox86 -lang-c++ -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/lib -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib -o o-g/TabbedProject o-g/.obj/Answer.o o-g/.obj/MarketingService.o o-g/.obj/Person.o o-g/.obj/applicationui.o o-g/.obj/main.o o-g/.obj/qtsoap.o o-g/.obj/moc_Answer.o o-g/.obj/moc_MarketingService.o o-g/.obj/moc_Person.o o-g/.obj/moc_applicationui.o o-g/.obj/moc_qtsoap.o    -LC:/bbndk/target_10_1_0_4828/qnx6/x86/lib -LC:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib -LC:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib -LC:/bbndk/target_10_1_0_4828/qnx6//usr/lib/qt4/lib -lbbdata -lbbsystem -lbbcascades -lQtDeclarative -lQtScript -lQtSvg -lQtSql -lsqlite3 -lz -lQtXmlPatterns -lQtGui -lQtNetwork -lsocket -lQtCore -lm -lbps
  C:\bbndk\host_10_1_0_238\win32\x86\usr\bin\ntox86-ld: o-g/.obj/qtsoap.o: undefined reference to symbol '_ZN12QDomDocument15createElementNSERK7QStringS2_'
  make[2]: Leaving directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  C:\bbndk\host_10_1_0_238\win32\x86\usr\bin\ntox86-ld: note: '_ZN12QDomDocument15createElementNSERK7QStringS2_' is defined in DSO C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib/libQtXml.so.4 so try adding it to the linker command line
  make[1]: Leaving directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib/libQtXml.so.4: could not read symbols: Invalid operation
  cc: C:/bbndk/host_10_1_0_238/win32/x86/usr/bin/ntox86-ld caught signal 1
  make[2]: *** [o-g/TabbedProject] Error 1
  make[1]: *** [debug] Error 2
  make: *** [Simulator-Debug] Error 2
  

  I wonder if Iam supposed to include libQtXml somewhere in my application.

  Guess I should have just even if it a bit longer.

  I added

  #include 
  

  In the web service class, and then added

  QT += xml
  

  In the file .pro as indicated in the reference QtXml.  The error disappeared.

• site studio designer m getting this error regarding

  Thank you for giving me an idea of how I will solve this problem:

  pls find the below screenshot:

  

  Jiri and Amey are correct.

  https://jonathanhult.com/blog/2013/01/missing-site-Studio-project-default-document-information/

  Jonathan

  https://jonathanhult.com

• CS6 CC construction error

  I'm not sure if it is a question of indesign or for DPS but my folios created CS6 are now unable to build because I upgraded to indesign CC... given that it is more than 100 articles with descriptions it is a small problem... any suggestions?

  Here is the exact error message when running the command "build folio:

  "An error has occurred at the launch of the app from the DPS App Builder.

  Article 'House' is not compatible with the spectator that the folio is published. »

  and it's not true that article corresponds to the provision of the slip...

  The files have been updated to CC...

  I had to change the number of Viewer in the "Folio properties" menu and it works fine now, it is the spectator number 20 and I chnaged to 28 and we are good to go...

• studio mx unknown file format error

  Help! I use the Flash of the suite Studio Mx Professional and I can't open a .fla file. He tells me that its in a "unknown file format".
  But the file opens when I used Flash 8 in my school program. Please tell me that they design programs of series 8, so they were not retro-compatible with the Mx series! Restless... IM in right now so sorry. So if there is a fix or a simple solution that used to make me scream, please post!

  Scream - you cannot open it.
  You must go back to the Flash 8 and "Save as" in the lower version.
  And if you think about it, is it not logical? Flash 8 can do many things that may not Flash MX 2004. How the old program should understand the new features?