VMDK show in double space

Similar Questions

• Double space - no duplicates

  Yesterday, I formatted the C drive (deleted Windows 10) and did a new install of Windows 7.

  My C drive has 52.6 GB of space and installed everything content takes up 24.8 (GB 25.0 on disk). However, when you look in my computer, it displays 2, 73 GB available, which means that 50 GB taken, which is double what I actually installed.

  In short, my space taken is doubled without actual duplicate.

  I did disk cleaning, cleaning of file system, restarts, updates, cleanings, manually checked records to see how they go back, checked hidden files... But it's simply double space taken without actual double data.

  I guess the best way to describe it would be that the glass is half full, but weighs as much as a large glass.

  I simply open C drive, made all the files visible, marked all and open properties.

  -> This method will not show you hidden and protected files.

  'pagefile.sys' and 'hiberfil.sys '. swap file takes up to 15.9 concerts and hiberfil uo 11.9 concerts. What are they, how and what can I do with these?

  -> Pagefile.sys is the Windows swap file. You can not without you, but you can move it to another partition.

  -> Hiberfil.sys is the file used by Windows to put the machine into hibernation. You can't move it. If you never use the "sleep mode" then you could delete the file with a little effort.

• I HAVE 64 GB OF STORAGE IN MY PHONE BUT MY PHONE ME SHOWS YOUR STORAGE SPACE IS ALMOST FULL AND I DO STORAGE IN MY PHONE ONLY 4 GB, PLEASE WHAT SHOULD I DO

  I HAVE 64 GB OF STORAGE IN MY PHONE BUT MY PHONE ME SHOWS YOUR STORAGE SPACE IS ALMOST FULL AND I DO STORAGE IN MY PHONE ONLY 4 GB, PLEASE WHAT SHOULD I DO

  Take a look at this thread and follow the steps in troubleshooting offered it. The question may be somehow connected with WhatsApp, then try to delete the app.

  storage of iphone issues 6

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article:use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• my c drive shows low disk space, so I searched for the program that holds more memory on drive c. I got to know that this pagefile.sys has 3 GB in the c drive

  Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.

  Hi jafrin.michel,

  Thanks for posting in the Microsoft community.

  Before you start the troubleshooting steps, I need the information required.

  What version of the windows operating system do you use?

  Method 1:

  If you are using windows 7, I suggest to perform a disk cleanup and verify.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  If you want to move the pagefile.sys to another drive, follow the steps and check out them.

  Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).

  1, write click on my computer and select Properties.

  2, click on the Advanced tab.

  3, click settings under performance menu.

  4, click on the Advanced tab and click on change.

  5, select letter (C :) and "BOLD" No pagefile then click on Set. )

  6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.

  7, again click apply and OK OK.

  8, the system you will be asked to reboot, click on Yes.

  9, after rebooting the system, you can see the pagefile.sys will be moved to D:

• Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer?

  Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer... (my question is not related to the questions at the beginning).

  Open my computer, right-click the drive icon, select 'Properties' and you'll see the pie under the general tab.

  Jim

  Microsoft MVP - moderator of the Forum - consumer security live a care - Live Mesh - Microsoft Security Essentials

• Could someone tell me please how to set up double space on Microsoft Word? I need the info as soon as possible. Thank you

  Report needs to be written in double space, and I do not know how to configure it in Microsoft Word. Where can I find the correct icon?

  Hello LouAnnRod,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the word and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  Discussion Questions General Group

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I would like to know how to double space on the notebook in a paragraph, how to register and send to another computer and number pages? can anyone help? Thank you!

  Please someone help I'am new to the computer world and I would like to know if anyone out there can help understand me how to double space on the workpad words and how I can save and send it to another computer for printing. Can also how to number the pages? And also I can use see fate on this workpad vista? Thank you.

  Joseph Monteleone,
  Thank you for visiting the Microsoft Answers community forum.

  Notepad is a very limited text editor, so you can't really do a lot of formatting.  Double-spaced, the only way is to put two 'statements' at the end of each line.  You can format the font, and set the page layout for printing, but apart from turn, wordwrap who speaks all the formatting, you can do it.

  To save a file, just go to file, save money, find the folder you want to save it in (don't forget remember where you saved it), name, and click Save.

  To send it to another computer on your network, you can choose the drive you want to move on the network and copy and paste, or drag and drop it.  Or you can go to the computer that you want to put on, navigate to the drive on your computer where you saved, and then copy and paste or drag and drop it.

  Let us know if you need more information.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am signed up to the CC, when I look in my apps old versions of the bridge appears, this means I use double space and can empty one in the trash?

  I am signed up to the CC, when I look in my apps old versions of the bridge appears, this means I use double space and can empty one in the trash?

  Hi louisew,

  If you have installed the latest version of creative cloud Applications, then Yes, we can go ahead and uninstall the previous version of computer Applications.

  Kind regards

  Tanuj

• Can HWO I do not double space?

  When I type then press enter it automatically double spaces. What should I do to fix this?
  Thank you!

  > When I type then press enter it automatically double spaces. What should I do to fix
  > This?

  It isn't double-spaced. It inserts the html for a paragraph tag.

  If you want a line break, press SHIFT + ENTER and dw will insert the html tag
  for a linebreak,.
  

  This isn't a Word.

• What is the "right way" to archive watched as TV shows to save space on my SSD in iTunes 12.3.3.17?

  I 212,92 GB in my iTunes Media folder on my Mac Book Pro with 751,28 GB SSD and I need some SSD back space.  I saved the file whole iTunes on an external drive, and I use a time Machine TB 3.  What is the 'best' way to remove TV shows I have watched but you may want to look again to retrieve the piece on my SSD?  Is it somehow within iTunes to do this, it can easily reload archived videos?  (For example like the original tΘlΘcharger the cloud when I bought it, but now my own sauvegardΘ?) p.s. Sorry, but none of the categories seem right for this issue. LRC

  A few options, I can think. One is to simply copy the media itself on the external drive and remove the entry from the library in iTunes. When you want to use it then "add you" the external file to iTunes that will put a copy on your computer that can be removed again after having watched.

  Another option is to create a separate library for items stored on your disk to archive.  Create a new library by holding down the option key while starting iTunes and tell him to put on the external drive you use for videos.  Drag the items currently there in the folder automatically add to iTunes in the Media folder on the outside.  Toggle the use of the library back if necessary.

  You need to maybe turn off or change automatic downloads so that they are not constantly re-uploaded in your main library.

• Point of Photos? Use it takes double space?

  Have used an iPhone for years, I am relatively new on my MacBook.  From what I can tell, photos app on my iPhone: useful, but the photos on MacBook app running el Capitan: not useful?

  I copied all my files in the pictures library, and then when I went to them for download to print them, I couldn't find the files.  I was told that I had to export them, which I did, which solved this issue and all the image files are in the same place (I learned from where to find where files of Photos are stored, but it is not super easy access, or in a concise list).  Now, I have two questions;

  1. If I use cloud storage, what is the point of having all my in the Photos app, other than just watching at home (which I don't usually do)?

  2 if I have all my photos in pictures and also export them to a folder all files are easy to use, I'm essentially used double my space hard drive to keep in both places?

  Yes, you are doubly space.

  If you get only familiar with the interface of Photos, you should be able to find and print your photos easily.

• vFRC shows no free space after restart of the vcenter

  I have a new cluster I implement vFRC on. The cluster runs great and the vFRC which seems to work without problems. Unfortunately to restart my VCenter the hosts in the cluster always show all they have vFRC installed, but show 0 MB of available space. The only way to clear it is to place the host in maintenance mode.

  It is of course difficult since it happens to all hosts on the cluster at the same time. Forces me to each stop all the VM on a host or disable vFRC on the virtual machine to a host to get into maintenance mode.

  Anyone know if this is expected behavior?

  or if there is problem kb/known, and I'm not finding?

  or a good direction to go to diagnose why this is happening?

  I am running

  6 3018524 on windows 2012R2 vCenter fully patched

  ESXi 6 u1 3380124

  Reference Dell servers R730

  vFRC on intel P3600 (NVMe interface)

  How your vCenter is allowed? EntPlus?

  What type of shared storage do you have? What is a San with an option of Flash?

  I've been looking for KB and found this one. Have you seen this one yet? http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2136867

  Otherwise, I found the list of best practices in the guide of vFRC 5.5, which remain valid for the v6, and I would check that these are achieved before continue.

  https://www.VMware.com/files/PDF/Techpaper/vfrc-perf-vsphere55.PDF

• How to show the white space of the text formatted?

  Hello

  I use Jdev 11.1.1.6.0 with ADF Faces.

  I have a requirement to show a text report page in recorded format. The report in text format is saved as a text report several records with each line containing the maximum 78 characters.

  Each drive is formatted with a space to display the data in the column. For example:

  SUMMARY

  -------

  Col1 Col2 Col3

  xyz1234 abc9999 mno1234

  ...

  The report data appears currently unformatted. It removes the white space and shows just with a few default spaces. Something like:

  SUMMARY

  -------

  Col1 Col2 Col3

  xyz1234 abc9999 mno1234

  ...

  Thus, you cannot read the data with the appropriate column header. If you query the table in SQL Developer, it shows with perfect formatting. Also our legacy Oracle Forms application to display with the correct format.

  Currently, I tried following, but it does not work:

  < af:outputText value = "#{row.rptText}" id = 'ot1' "

  inlineStyle = "do-family:"Courier New";" font-size: 12.0pt; »

  noWrap = "false" / >

  I tried this on af:column too, especially noWrap = 'false', but so far without success.

  Any help is appreciated.

  Thank you

  JAI

  If you can use a converter custom jsf (validation and conversion of entry) to change in the query using "pre" helped the (text with pre sourrounf) when the data is rendered. The converter must implement two methods. Then you can try to use ' ' as a space of unbreakeable instead of simple spaces.

  Timo

• Thin provisioned VMDK consume all available space

  Hello

  • Server: Win 2008 R2 with SP1 (file server)
  • Storage: VMDK on VMFS5 datastore (thin provisioned), which underlies the SAN fiber storage
  • vSphere: vCenter Server Standard 5, ESXi 5.0 Patch 2 (build 515841)

  ... So, I have a VM file server running Windows 2008 R2 with SP1.  The system (c) partition has been successfully thin (VMDK using 13 GB to 40 GB).

  However, for all subsequent hard disks virtual created on the server, the NTFS partition is very slow to get into shape - and the actual size of the VMDK creeps slowly up to the size of the VHD (you can see the gradual rise of the VMDK size in the browser to store data during the formatting process).

  The VMFS data store that we create new virtual hard disks is version 5.  All virtual machines with virtual hard disks on VMFS version 3 seem to be supplied thin OK.

  Nobody knows what could happen here?

  Hello

  Do you use quick format?

  Otherwise, your score will take up any space. Check here:VMware KB: using thin provisioned disks with virtual machines

  "If a guest operating system needs to use a virtual disk, the must invited first operating system partition and format the drive in a file system it can recognize." Depending on the format selected in the guest operating system, the format can cause the disc thin provisioned in full size.

  For example, if you have a drive end with a Microsoft Windows operating system implemented and format the drive, unless you explicitly choose to fast formatting, Microsoft Windows format tool written information to all sectors on the disk, which in turn inflates the disc thin provisioned in full size. "

  Kind regards

  Julien.

• ESX 4.0 shows less available space on a RAID Volume as full size

  Server configuration:

  VMWare ESX 4.0.0 Update 1

  Mother SATA superMicro SuperServer 6025 B

  Intel E5405 2.0 GHz CPU quad-core 64-bit

  8 GB OF DDR2 ECC RAM

  GCCA 9690 3Ware storage controller - SA with the latest firmware (which

  supports VMWare 4.0.0 Update 1) and installed the ESX drivers.

  Disks 0 and 1 are 1 TB disks.  2-5 drives are 2 TB disks.  2 TB disks

  have already been used with Windows and has the GUID partition table, but now

  I want to use with VMWare.  It causes me problems I think.

  I created a volume of RAID1 1 TB of drives 0 and 1 and installed

  VMWare on this, and my first data store is on the remaining space on this

  volume.  I then created a RAID10 volume out of the 4 drives for 4 TB

  total space.  It's initialization through initialization in the background is

  immediately available via the controller.

  I tried to create a store of data on this volume. I had various

  complaints from the GUI, including "unable to get the partition information.

  and "object is not set to an instance of an object" I tried to click

  my way through.

  I did a little research and saw an article on how to create partitions

  manually.  But fdisk was complaining about the GUID partition tables, and

  even after I created the partition and restarted I wasn't able to find a

  device in VMFS to create the file system on.

  So I thought I would blow the entire partition table, so I used "dd".

  to kill the copies of the partition GUID in beginning and end table

  of the disc.

  Now ESX not be complaint, but it is said that the capacity of the disk is

  3.64 TB and TB 1.64 is space.  However there is no

  table partition at this point and "fdisk-u/dev/sdb" shows the full

  capacity of the volume.

  What I am doing wrong?

  ESX (i) can't stand no bigger than "2 TB - 512 Bytes" lun.

  What you need to do, is to divide your RAID and attend smaller LUNS ESX host.

  See Configuration Maximums

  André