vmnic0 y vmnic1 ha UN reinicio after notice

Similar Questions

• script fails after update U1

  Hello

  I have a script that I use to configure hosts after they are built on the iso.

  I followed until the beginning of the script, but don't know how to fix.  any ideas?

  Looks like it fails immediately after that I add the second network card to the vswitch0.  Host that I build loses network connectivity, and when I go through ILO, there is no network assigned to the management network adapter.

  Here is my code:

  Basically what we do here, it of add vmotion portgroup to vswitch0 and then add a second network adapter to the switch which will be active nic for vmotion and standby card network for management traffic.

  Any help is greatly appreciated.

  1. Remove the value by default "VM Network" portgroup to vSwitch0

  $vs = get-virtualswitch - vmhost $vmhost - name vSwitch0

  $vpg = get-virtualportgroup - $vs - name "VM Network" virtualswitch

  delete virtualportgroup - VirtualPortGroup $vpg - confirm: $false

  1. Add Port for VMotion and VMK PortGroup on vSwitch0

  $vmovs = get-VirtualSwitch - VMHost $vmhost - name 'vSwitch0.

  New-VMHostNetworkAdapter - VMHost $vmhost PortGroup - VMotion - VirtualSwitch $vmovs IP - $vmoip - subnet mask 255.255.255.0 - VMotionEnabled $true

  1. Add a tag of VLAN to the Interface of VMotion

  $vs = get-VirtualSwitch - VMHost $vmHost - name vSwitch0

  $vpg = get-VirtualPortGroup - $vs - name VMotion VirtualSwitch

  $newVpg = set-VirtualPortGroup - VirtualPortGroup $vpg - VLanId $vmoVLanId

  echo "' # Add VMNIC2 to vSwitch0 '"

  1. Adds VMNIC2 to vSwitch0

  $vs = get-VirtualSwitch - VMHost $vmHost - name vSwitch0

  Game-VirtualSwitch - VirtualSwitch $vs - Nic $vmonic

  Alex, I'm sorry to have kept waiting you.

  I took the test and I see the same error you see.

  Tests were conducted ESXi 208167 and with PowerCLU 4u1 4.0.0.

  A simple configuration with 1 card NETWORK attached to vSwitch0.

  

  I'm trying to add a 2nd NIC (vmnic1) to vSwitch0.

  Notice that the ping begins to fail

  

  It seems I've lost the original CARD (vmnic0).

  

  This behavior is in contradiction with the text with the parameter - Nic.

  

  If at least the help text for the cmdlet is incorrect. It is apparently not a 'Add' but a 'replace '.

  The workaround for this problem is quite simple

  $nic = (Get-VirtualSwitch -VMHost $esx -Name "vSwitch0").nic
  $nic += "vmnic1"
  Get-VirtualSwitch -Name "vSwitch0" -VMHost $esx | Set-VirtualSwitch -Nic $nic
  

• Solution for Thunderbird 25.0 crashes after installing the provider 1.0.2

  After noticing that this supplier had stopped working, I checked and found that the old Google API had been abandoned. The author of provider advised to change provider 1.0.2 on an interim basis, but in the meantime 1.0.3. I did and Thunderbird crashes whenever he started. the solution for me has been upgraded to the latest Thunderbird 31.2 and then opt to accept the last module lighting during all up to.
  Therefore, any thing now return to normal. Phew, it was scary! A big thank you to the author of supplier for the display of the note on the disappearance of the old Google API. My system was running 8.1 Win

  I prefer CalDav. Then you don't need supplier and it is less a thing which must be maintained to the appropriate version.

  Note that this web page:

  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

  more than a year, so is the given version numbers are obsolete. However, it is always good for the process of connecting to your calendar.

  Previous versions of lightning are here:

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/versions/

  which is useful if you need run other than the Thunderbird later.

• Motherboard model H535 failure - the type of machine and the serial number invalid after replacement

  Does anyone know how to set the new Type of Machine and the serial number after a motherboard for a replacement model H535?

  The motherboard has recently failed on my model H535 (7 months after the expiration of the warranty - thanks, Lenovo). No local garage would agree to replace due to its nature of owners (thanks, Lenovo). I spent about four hours on the phone being bounced into back-and-forth between the many support staff (usually combined) Lenovo in sales, technical support, support of parts of IBM and various other departments (thanks, Lenovo), which one has suggested that I might have to try to find a motherboard on Ebay or Amazon for my computer in less-than-2-year-old. However, I finally get to someone at Lenovo, which has been able to sell a motherboard - for 2/3 of the cost of the original computer.

  Now, I installed the motherboard, and it works. However, during each boot, I get a POST with two beeps error which reads as follows:

  00CE error: Machine Type and serial number is INVALID

  Start of manufacturing sequence is taken if no selection is made

  I presume that the BIOS on the new motherboard must be programmed with the right Type of Machine and the serial number of my computer. I've read various things on the Internet about what to do, as updating the BIOS (I can not even find a BIOS under "downloads" of support for the H535 - thanks, Lenovo model), using WinPhlash (I apparently need one kind of BIOS ROM file to make it work, I don't have), getting a Lenovo hardware maintenance disk for my model (which apparently isn't available for other special people only me - thanks Lenovo), etc.

  The waiting time for Lenovo support are ridiculously long, and almost every customer support person is ridiculously uninformed on the difference between one of their computer models, and even less their motherboards (thanks, Lenovo). I am amazed and extremely frustrated. It shouldn't be rocket science.

  On a side note, I initially bought the computer from Staples with a credit card with extended warranty protection, which means I can get a refund for repair. Although the motherboard came with a packing list, no Bill has been provided by Lenovo, and I couldn't make them send one - or maybe even with success to explain what a Bill is (thanks, Lenovo).

  Well, Lenovo support was useless, and any alleged authorized suppliers were in fact still suppliers or could help with my problem. But I was finally able to fix it myself. Once I found the right piece of software, it has been fixed in less than a minute.

  My BIOS is by American Megatrends, and I discovered that they have a set of utilities that includes a called AMIDEDOS. It is intended for manufacturers to be able to change the strings of text stored in the BIOS for things like the manufacturer, product name, Version, number series, UUID, SKU number, family, etc., that is what I had to do. It is not intended for use by consumers, but it's there.

  When I ran the "DMIEdit.exe" program AMIDEDOS (clicked and ran as administrator from 10 Windows) and click on "System information" from the list, I saw "Product Name | STRING | Invalid' and ' serial number | STRING | NOT VALID ". The other fields appeared to have valid entries. I double-clicked on the fields valid and changed their "H535 model" and the serial number of my computer, respectively and then clicked on "Update all" at the top.

  Much to my surprise, he reported that he had successfully registered the new information. And, perhaps even more surprising is the fact that, when I rebooted, the double beep and the warning about the type of computer not valid and serial number have disappeared. In addition, the BIOS showed I had entered the new values, and the 'Manufacturing Boot Sequence' option (I understand can be much slower than a normal boot) had disappeared.

  Again, I'm a little surprised simple it was actually solve the problem once I got the correct software, or Lenovo part nor American Megatrends apparently offers to the owners, and it took hours and hours of research and research to understand. Use this information at your own risk, however, as playing with BIOS apparently can lead to problems not easily solved. That said, the modification of these text strings seems relatively safe.

  I will mention that I also ended up changing the method of "LEGACY" to "UEFI" boot in the BIOS after noticing that the selection.

• Aspire V3 - 772G weird fan noise after cleaning

  Let's start with:

  Acer Aspire V3 - 772G (Intel (r) ore (TM) 4702MQ-i7 CPU @2. 20 GHz, 8 GB Ram)

  I don't care:

  After noticing a slight decrease in preformance of games and use my laptop in general so I decided to clean the fans. As this laptop is almost impossible to open I decided to clean the easy way, to the breath of compressed air directly into the fan on slow breaths and infrequent. After a lot of dust in the system I turned on the computer laptop back only to hear this reading 'cd' - as the hiss of the left side of the laptop (where the fan is). Be worried, I could have broken something that I turned it off stright, and then again once realize there was not much i could do about it at this time.

  I worry that I have could have spun the fan to fast, the cause, the fan did not have this noise when I bought it new or before I cleaned it for this love. It was purchased in a shop online Norwegian (I live in Norway) to 2014-08-18.

  I thought I ask here before that I contacted the store or the support to see if it's just me an overreaction or if there is a real problem. So is quite normal or abnormal as the dust recently got cleaned?

  Thanks for reading my message, and I look forward to responses from you guys.

  -Raito

  I have blown many laptops and spun very fast fans and was never killed. I usually blow just so good. You could have dislodged something that doesn't blow out and rubs on the fan.

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• Software of blackBerry after agreeing to meeting invite on the mixture, the meeting does not appear in the mixture but appears on the Passport

  Hello

  I came across an interesting bug.

  When someone sends me an e-mail meeting invitation, and I accept it in Blend. When I look at my calendar in the meeting Blend is not in my schedule. But when I look on my phone I see the meeting in my calendar.

  I can send screenshots if necessary.

  Alex

  Hi @alexklkam

  I'm unable to reproduce this problem, all my calendars corresponding after several tests.

  If possible you can record what you are doing this cause to issue to occur if I can do a few tests more?

  Can you let me know what type of service email\calendar are you using, for example Outlook.com, Gmail as well?

  When this problem occurs, the entry ever appear?

  For example, if you close and reopen mixture after noticing that the entry is not indicated, it seems once again?

• Reinstall Windows 7 since the recovery on a laptop Dell Inspiron N5110 Partition after FORMATTING of C:

  Hello

  I desperately need HELP! I formatted my laptop Dell Inspiron N5110 and reinstall a copy of windows 7 after noticing several virus on my pc. But I doesn't not delete or format the Partition recovery. The recovery partition is intact. I now have to recover my pc to the factory of origin of windows settings , but I don't know if it's possible and how. I didn't know I could just use the Dell Datasafe from the beginning before formatting my pc (stupid I am). I handed a letter to the recovery partition (f) and know I can see all the files included in it. After searching for a while, some people suggesting to run the cmd following under 'Tools' dir (ED I can't find):

  imagex /apply f:\dell\image\factory.wim 1 c:\
  

  Can someone help me please? I really need help with that! Can someone give me instructions what to do?

  Thank you

  Chris.

  Hello

  Don't need you to worry, by making use of the formatted partition recovery software you can easily recover files after formatting the hard disk partition. Few days back, I spent the same similar problem where in lost some important files due to the installation of the OS. Then I tried this recovery software which really helped me to recover files after the installation of the operating system. So, you can download this software by following the below mentioned links.

  Page link: www.recoverformattedpartition.com/file-recovery-after-formatting-during-os-re-installation.html

  Download link: www.recoverformattedpartition.com/.../recoverformattedpartition-windows.exe

  Good luck

  Seley

• What is this reddish color after disabling all layers?

  Hi all!

  I am cleaning this painting which has this weird stain on it with the Healing Brush tool. After noticing the place did not go far I wonder which layer is keeping this task and it is then, I noticed this weird color in the transparency model? As you can see all the layers are turned off, and because it's painting of the artist, I can't show the painting on this platform (sorry guys). In any case, anyone know why this is happening? Thank you!!

  

  Looks like you're working in Quick Mask Mode, and what you see is the mask.

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• View-created VMs being deleted after cloning

  Hello

  I created a cool environment to view I'm having some difficulties with. I can create a pool of offices but after notice of the clones of the Parent virtual machine it deletes the new VMs right after finishing the clone operation. So, what is happening, this is the machine Virtual Parent is cloned, the tag, and then the new virtual machine is removed.

  Details of the environment:

  2 host ESX 4.0 Update 2

  1 2 physical 4.0, also running View Composer vCenter update server

  1 physical view 4.5 Manager Server

  vCenter and View Manager are configured to use an external SQL DB

  No configured DB event

  Any ideas? I probably missed just one step of configuration somewhere.

  The pool should show the reason why he disabled the commissioning.

  Sent from my iPhone

• After restart of 2 of our servers ESX 3.5 - 110268 the console or VMS are inaccessible

  Hi all

  We've had this problem for a year now, and we assume that when we fixed a server that was causing the problem in these two places (Singapore and London).   However, we have since discovered that just reboot the server causes as well.   So I'll try to find a solution if we do not have to have the car of people for hours to get physically on the server to resolve the problem.   I wish the problem more in detail now.

  In London, we have an HP Proliant DL380 G3, with a NETWORK NC7781 card, which has 2 ports (vmnic0 and vmnic1) connected to vSwitch0 (which is the Port of the VM - DataCenterLAN)

  In Singapore, we have an HP Proliant DL 380 G4, with a NETWORK NC7782 card, which has a port (vmnic5) connected to vSwitch4 (which is the Service Console Port - Legacy eth0)

  During the reboot of these machines are for some reason, the tg3 driver does not load properly and causes the switches above to lose the connection.   In London, I can at least PuTTY in and solve the problem, but to Singapore, it's the Console port that breaks down, making it impossible for me to connect, so get hold of local people, and they can take less 2 hours and up to a few days to get there.

  What I have to do is run the following commands

  esxcfg-module d tg3

  esxcfg-module e - tg3

  vmkload_mod u tg3

  vmkload_mod tg3

  in London I can go to VIC - Configuration - networking and readd the vmnic on the Virtual Machine Port

  In Singapore, I have the most local support to run these 2 commands as well.

  esxcfg-vswitch - L vmnic5 vSwitch4

  and then

  esxcfg-vswitch - M eth0 vSwitch4 Legacy\ Pei vmnic5

  Why is happening.    We have a few other machines that I expect to have the same problem, based on the type of computer and network cards, but they did not.   The only thing these two have in common is that they are both among the first ESX boxes, we have deployed and they have been upgraded to version 2.5.2 and 2.5.3.   We had 2 other machines that have been in our Dev environment which were identical, but they did not have this problem, but they are local to us and not in another country and one-third of the way around the world.

  If there is not a direct solution, is there a way to put something in place so that the controls can run on startup or reboot?

  Thank you

  Steven Stuart

  If nothing else, you can put orders in /etc/rc.local as if entered you them in the command line.  It will keep you in suspense when / if another number arrises.  If you have the time, it may be interesting a relocation for strange topics such as this one.

  -KjB

  VMware vExpert

• Question about the collection of NETWORK adapters / collage

  When installing ESXi, I want to use all 4 GigE ports on my server and I put a static IP address for each NIC.  Once the server is in place, I bind two NICs.  What I want to know is, it is best to remove the IP address for the second NETWORK card in our DNS?  For example, after you install ESXI, our DNS has the following:

  esxi1.mycompany.local 10.10.0.111

  esxi1.mycompany.local 10.10.0.112

  Should I delete the 10.10.0.112 entry if the servile pair use 10.10.0.111?  I think that I should so that there is no misdirection, but I'm not sure.

  Any suggestion would be appreciated.

  So phyical NIC have IP addresses assigned to ESXi.  You say ESXi which physical network cards must be plugged into the virtual switch and you assign an IP to the network management agent who is also trendy that same virtual switch, but never you assign IP addresses to physical network interface cards.  The sole purpose of a phyical in an ESXi installation nic is so they can connect to the virtual switches that you create within your ESXi installation.  Then it's the other virtual machines and VMKernel ports that have their own IP address.  Take this picture below, that I found on the internet for example.  These (vmnic0 and vmnic1) physical network interface cards have not all ip addresses, there is no record of A DNS pointing to those, etc..  They are there to connect physical switches on your virtual switches (they are network devices; it is the clearest way to think about).  The gray bar below is a virtual switch and the green dots on the virtual switch are ports where something is plugged.  These virtual machines (Linux, Windows, whatever), that's what has ipaddresses.  The special devices plugged into the virtual switch are called Service Console and VMKernel Ports (in ESXi 4.x, they are all just called VMKernel Ports).  These have IP addresses and these are the closest things to what you describe in your message.

  If you get the chart however, you will notice that the virtual switch "obligations" say these two NICs phy, together based on how it to bind to them.  Unless you want to do a lot of research, or you have an exceptional case complex parameters for pasting of these two NICs (in the tab "NIC Teaming") should probably be "Route based on the original virtual port code" and "link status only.  Lighthouse of probing should be used in cases when the status link only mode does not work (usually he does it very well).  Moreover I also put the two cards as 'Active' network and say yes to "Warn switch" and "rescue".

• Uplinks ESX on a blade of UCS

  After installing ESX on UCS Blade (adapter type is Palo, the number of network cards is 2) sometimes I see that the uplinks are vmnic2 and vmnic3 (output of esxcfg-NICS - l)

  Where are the output of esxcfg-vswitch - l shows the uplink as vmnic0, and it also generates a warning saying there is no such thing as vmnic0.

  This happens not all the time. Anyone know why this might be happening?

  I saw this happen a little when you do not have NICs as the first devices in the vNIC/vHBA Placement. By default, we put the HBAs first sometimes ESX doesn't like it and will the NPI as vmnic2 and 3. If you move the network above the HBA cards, they come as a vmnic0 and vmnic1. I have always to reorganize and put my NIC before my storage.

  Louis

• question of vSwitch transmission of local area networks VIRTUAL VMWare ESXi, Vsphere 5.0 5.0

  Having little experience VMware, I entrust the task to try to see why one of our VLAN does not work on one of our servers ESXi 5.0. I will try to be as descriptive as possible.

  The issue began just after works well for months, when it started for starting and running config had not been updated for several weeks on the router and switch.

  Our server has 4 0 1 2 3 physical NICS

  0 and 1 are associated together on VLAN1 and are also used for the management network

  Map NETWORK 2 is used for 111 VLAN (network connect our wireless users to so that they cannot interact with VLAN1)

  3 NIC is connected to the VLAN 66 (a network for video and deployment services)

  These 4 physical network adapters is connected to three different vswitches as follows (I'm not the one who created these so don't ask why they are as they are)

  a vmnic0 and vmnic1 vSwitch0

  vSwitch1 has vmnic3

  vSwitch2 has vmnic2

  All these ports are physically connected to a Dell PowerConnect 5548 switch

  vmnic0 to:

  interface gigabitethernet1/0/24

  Description "VM Server 1.

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic1 to:

  interface gigabitethernet1/0/17

  Description "VM Server 2."

  switchport mode general

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  vmnic2 to:

  interface gigabitethernet1/0/6

  Description «VM Server 3»

  switchport general allowed vlan add 111 tag

  VLAN allowed switchport General add 1 unidentified

  VLAN banned general switchport add 5,66,98

  switchport access vlan 111 (tried several different configurations on this port that Trunk including 1 unmarked and 111 the tag as VLAN 1 and 111 come through the router on the same port. Also just a base switchport mode access vlan 111)

  vmnic3 to:

  interface gigabitethernet1/0/43

  Description "VM Server 4.

  switchport access vlan 66

  If I plug a laptop computer into im int 1/0/6 I get an IP address from the DHCP server, and you can get online. When I go into the properties vSwitch2 and go to VMKernel and try to set it to automatically get an IP address, I get a 169.254*. * address. There is no connection if I statically set the address of one knowledge is available yet. I'll add more information later if needed, I have a meeting in which concerns another project. Anyone who can help, thanks in advance. If you need specific information, I will answer as soon as POSSIBLE.

  On the configuration under maps page network vmnic2 has no observed IP address ranges and I do not know how to change the nic to perhaps add the addresses

  I would try to eliminate the physical NETWORK adapter on the host being the issue. Silly question, but is there a link light? Drop a sniffer out there and see if there is no traffic passing if trying a different physical nic does not help.