VMware-cmd/vmfs/volumes/storage... / createsnapshot does not work on vSphere?

Similar Questions

• Volume Control Center does not work during a Skype call

  Volume Control Center does not work during a Skype call.

  That's exactly what I got after upgrade to 9.0.2 and 6.3 of Skype iOS

  I use Control Center to adjust the volume in applications. I can't use the volume button of material - it's broken.

  I thought that I could go back to the previous version of Skype (because I remember the working software volume slider), but the AppStore suggests none of the previous versions. I can't find another Skype.ipa than 6.3 anywhere. I tried to restore my ipad support Skype, but the program hangs for hours saying "Installation."

  Any help, please?

  Well, found a solution for the broken button by activating AssistiveTouch under settings > general > accessibility > AssistiveTouch.

• Volume up button does not work like the shutter of the camera

  I have an iPhone 5 with iOS 9.2.1 (13D 15). The volume up button does not work on it like a camera shutter. I think that it used for, and iPhone to my wife 6 with the same iOS version works fine. It is a problem, because I am using this phone with a stick of selfie, which triggers photos by simulating the volume press up button, so it doesn't work at all for me. The physical button works - I can control the volume with her settings. And when I try to use the stick selfie, I get the volume until the display on the phone, so I can see that the signal of the selfie stick is received correctly by the phone. And the stick of selfie works with my other phone that is not a problem with the volume up button.

  Work began after restarting the phone. So it's a bug to Apple report, the solution is to reboot the phone.

• Re: Satellite L500 iCQ, as Volume Rotary control does not work

  Front volume control does not work. Volume is set to maximum and can only be controlled by the mouse and the slider control.
  Can anyone help?

  To be honest I don't think that anyone will be able to help you with this.
  As far as I know that's not used such mechanical volume on older models of computers laptops, but electronically part controlled by software, so the only thing you can do is to test the functionality with the settings and see if the problem will be the same.

  What else can you do? I do not know. Maybe update the BIOS, but I do not think that this will help you.

  Do you use pre-installed OS original you got with your laptop?
  Have you made some changes or anything that can have a negative influence in this?
  Since when you noticed this strange behavior?

• Volume control touchpad does not work!

  I have a HP Pavilion dv6-1355dx notebook and the touchpad where my volume control / mute and wi - fi on / off toggle does not work anymore.  He has only started to happen after I did a Windows Update a few days ago.  Y at - it an update of the driver or something I need to do to fix it, or I'm just unlucky?

  Any help would be appreciated!  Thank you!

  Hello

  Try the following.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.  Plug the power adapter (leave the battery) and start Notepad - see if the touch buttons now respond.

  Kind regards

  DP - K

• Windows Media Player 12 volume up-down does not work with the mouse scrolling

  Windows media high-low Player volume does not work with mouse scroll... why?

  It is a simple function just add this option... plse something... wish...

  Hello

  I suggest you submit your feedback using the link below.

  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

• Service of Intel RST (Rapid storage technology) does not work. Windows 7.

  Win 7 was incredibly slow, MSCONFIG helped me to manually stop several applications that run in the background and it's OK now. But now I have a different problem. Intel RST service does not work. I tried MSCONFIG where it shows as stopped. Can anyone help please?

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download your disk from sky to share with everyone and post a link here. Please say if the report was obtained in safe mode.

  Please download and share with all copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events (the file default evtx type) and give a name to the file. Do the same for the application log. Don't provide filtered files.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• VMware-cmd persistent / not persistent does not work in vsphere / esx4?

  Hello

  We have a problem with the definition of a State of non-persistent disk with a script - something that we used to be able to do with ESX 3.5

  On ESX 3.5, this used to work:

  # vmware - cmd XPROUTER.vmx scsi0:0.mode independent-no persistent setconfig

  On ESX 4.0, the statement runs as follows and does not return anything - that is:

  # vmware - cmd XPROUTER.vmx scsi0:0.mode independent-no persistent setconfig

  #

  Neither does not change the .vmx or the State of SCSI0.0 in the GUI.

  Also, if I try to edit the .vmx with text editor line.

  scsi0:0.mode = persistent "independent-no.

  The change does not appear in the GUI configuration...

  Looking at vmware-cmd reference V-sphere, it seems that the order to setconfig is gone?

  What method can be used to assign a disk of the machine non-persistent / persistent command-line on ESX 4.0?

  Thanks in advance!

  That's right, which was removed from vSphere, I think that it might have been some curiosities and items in the past with the command and perhaps removed all together. Technically, the vmware-cmd is an obsolete utility. You'll probably want to take a look at using vCLI or PowerCLI to reconfigure your VM to fire the drive persistent or not persistent.

  You can take a look at the vSphere SDK for Perl, there are a variety of scripts that allow for the wide range of operations against your vCenter, the host and the VM (s): http://www.vmware.com/support/developer/viperltoolkit/viperl40/doc/vsperl_util_index.html. That would be of interest is vmreconfig.pl http://www.vmware.com/support/developer/viperltoolkit/viperl40/doc/vmreconfig.html , you will find that you will be able to update your disc mode.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• VMware fusion 3 - adjustment to comments does not work with Windows Server 2008

  I use 3 Fusion with existing image from Fusion 2.x on Windows Server 2008. After the upgrade to Fusiion 3 (I upgraded VMware tools (I've also tried their uninstall and reinstall) too) the guest operating system does not change the resolution when resizing the window. It does not change the resolution if/when I goes into full screen mode. I have an 'exclamation' mark in Device Manager and it says that "Windows has stopped this device because it has reported problems. (Code 43) ». I tried with and without 3D acceleration enabled.

  WS2008 is where I spend most of my time in fusion, I hope that this can be solved somehow (a config directive file or something perhaps?)?

  Thank you

  Miha.

  He had a similar position and the problem is specific to the version of the virtual machine virtual material.

  Can upgrade you your VM hardware version? (Fusion UI have probably an option present as 'version Upgrade VM HW'... cannot check now but 90% sure about that.)

  Thank you.

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

• Volume control button does not work as it should on Satellite P

  Hello.

  I flip the button that controls the volume, and I realize that he is not following me!
  I have the volume and it decreases with a funny way irregular (very little)...
  I have the volume and even it does, or it does nothing!

  Can someone help me with this?

  What model of laptop do you have?

  I have a U400 and I ve got the same volume control.
  I read here in the very similar topic forum and the guy has solved this problem to clean the contacts.
  There was mud and dust which affected the volume control feature.
  Volume control level jumped around.

  I put t know how he did it, but I think that a jet of compressed air should help you.

• Qosmio G20 - blue Volume Indication bar does not work under Vista

  Hey guys,.

  would really appreciate your help on this. 2 days ago I decided to upgrade my laptop Qosmio G20 for vista (I know I don't need to hear all the problems of Vista, but I had to do). in any case, after a lot of problems (missing drivers, windows known glitches etc), I managed to get it up and running again. At least it's functions.

  All Toshiba equipment are missing because they are not compatible with vista. I found the drivers of replacement etc. and solved most of the problems. I have not yet solved the blue volume indication bar inoperative led, located just on the right side of the touch pad. It s simply stating an indication of fake volume and its not changing at all with any volume control. The green on the screen volume bar is also missing.

  Any of you have any idea how to solve the problems?

  Thank you very much

  Anthony

  Hello Anthony

  I assume that you have already noticed the Qosmio G20 isn t that supported by Vista. So I can believe you had problems to find all the missing stuff, but if the Vista works well now you should not focus on the little things.
  Exact managed and controlled by Toshiba designed tools and utility functions.
  If they are not available, I have gift opportunity see t to solve this problem.

• Levels/brightness / contrast does not work

  Well, I had this problem for awhile now.

  Whenever I want to use levels or brightness settings / contrast, pop up comes up, I set the sliders, there is a glimpse, but he always comes back to the same thing when I press OK. It worked once, I don't know I how I did you. I read that he has worked for many people with the image to 100% (Ctrl or Cmd + 0 0), but it does not work for me. I'm editing a scan black and white drawing.

  Help.

  Settings of tones and colors will not work on pixels that are entirely black or entirely white, not until they are moved away from 0 or 255. It's just the nature of things. Try to move the Middle slider in the levels, on a black and white checkered pattern and see for yourself.

  The display of 100% is not "making work" - it gives you a precise overview. The thing is that a mode other than 100% is a version on the scale and resampled and this introduced resampling of the intermediate levels that are not really there in the full version.

• Discs of ESXi supports local (UFS) as a Volume/vmfs/volumes - didn't want not!

  Hi all

  Updated from 5.5U2 to 6.0

  A race of NAS VM using two disks using RDM (virtual) to get direct access to disks and smart State - created with the flag - z.

  After the upgrade to 6.0, ESXi now mounted (s?) drive - which are SoftRAID(4) 1 and have a file system UFS - to/vmfs/volumes/sink. This happened only after the second start, but now there is no way back for me.

  After the first reboot after upgrade, I was able to assign the disks to a virtual computer and restart it. On the next reboot, the problem above has occurred.

  Perhaps interesting to note that the volume is not mounted as a VMFS storage (at least it seems), but directly in the folder/vmfs volumes - and it is not a symbolic link like usual data warehouses.

  Tried Altready:

  / recreate the files with vmkfstools RDM

  Unmount the volume/vmfs/volumes/disassemble sink via esxcli file storage system (using all the u/n/p options, but ESXi said he "can not find the nas drive", which is not really sense)

  There is a thread on serverfault (not mine) with the same problem and similar details.

  VMware - 6.0 ESXi RDM mounting as local volume - Super user

  For the moment, I went down to 5.5u2 to access the virtual machine to work.

  Any help is appreciated.

  See you soon

  IAM

  It is possible to blacklist the ufs module with the following command to esxcli, and won't automount in volumes of ufs. the host reboot is required

  $ esxcli system module set m eggs e fake