VPN applications

Similar Questions

• Can I have a copy of KB2982791? My client VPN application

  Original title: Please, please, please can I have a copy of KB2982791? My client VPN application

  Yes, I am aware that MS has w / drew this patch.

  However, I don't have the choice. I SHOULD have the patch and am willing to take the risk. My client is a Government, and their VPN is administered by people who insist that I have this patch in order to do my job.

  Can I PLEASE have the patch? If my system has problems, I'll take the risk. I can't change my client--their admins VPN will ALWAYS REQUIRE MS PATCHES, even if MS released their.

  I implore anyone who wants to hear it.

  Computers belongs to me - I'm an entrepreneur owner unique to Montgomery Co. MD [whose] VPN is administered by people who insist that I have this patch in order to do my job.

  Well, I'm afraid that you are between the proverbial rock and hard place, my friend.

  KB2982791 was "fired" shortly before midnight (Pacific time) on August 15, 2014. KB2982791 is no longer available through Windows Update. KB2982791 is no longer available via the MS Download Center or from the Microsoft Update Catalog. In addition, Microsoft informed uninstall KB2982791 if it is currently installed.

  If the admins of the County cannot understand the FAQ update on this page...

  
  Why this bulletin has been revised August 15, 2014?
  Microsoft revised this bulletin to address known issues related to the installation of security update 2982791. Microsoft is investigating the behavior associated with the installation of this update and will update this bulletin when more information is available. Microsoft recommends customers to uninstall this update. As an additional precaution, Microsoft has removed the 2982791 security update download links. For instructions on how to uninstall this update, see Microsoft Knowledge Base Article 2982791.

  .. .you need to slam a few heads together (or contact their TAM Microsoft).

  I suspect upgrading kernel (MS14-045) re-Mode drivers - will be released very soon (for example, early next week?), probably under a new KB number. [Those who say cannot know & those who say can't know.]

  Good luck on Monday morning!

  PS: Here is the consumer, specific peer-to-peer support forums. You'd better post in Win7 IT Pro-specifiques forums-online http://social.technet.microsoft.com/Forums/windows/en-US/home#category=w7itpro [or in the forums partner if you are a MS Partner]

• AnyConnect VPN application

  Hi all

  There is a single query on the anyconnect ASA 5510 deployment. We have the ASA 5510 with security more lic. and for lack of run (client) anyconnect VPN for concurrent users. It requires a separate licence for Anyconnect (client).

  5510 a security more lic.

  Firewall settings:

  AnyConnect Essentials: disabled

  AnyConnect Premium: 2

  Max VPN session: 250

  If I run anyconnect VPN it takes max 2 session. But need more sessions.

  Thank you

  Vishaw

  If you just want to use computers to connect to anyconnect using the AnyConnect client and not the clientless SSL, you only need to purchase the license AnyConnect Essentials for the amount of connection you need (supports up to 250).  If you need SSL clientless also, then you must purchase the Premium license.  If you also require that mobile phones, tabs, etc. need to connect to the AnyConnect client, then you need client AnyConnect mobility.

  The following link gives you an overview of the licnenses for the 5510 and other models ASA.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/intro_license.html#wp2142486

  In addition, here Pete does a good job of explaining AnyConnect licenses.

  http://www.petenetlive.com/kb/article/0000628.htm

  --

  Please do not forget to select a correct answer and rate useful posts

• iPhone 6s won't connect to VPN on work wifi but goes on other wifi networks

  Hello

  I have been connected to my wifi to work for a while and had to use a VPN to use things such as whats'app and access to sites like Facebook. It worked well until what recently just VPN logs not when I am connected to this wifi network. I know that the password etc and I get the symbol wifi at the top of my phone but never impossible to access Web sites (which was normal, but the VPN it fixed), but now I can not connect the VPN even more.

  The VPN application I use is Betternet but I've also tried a few others, none works. However, they all work when I connect to my own wifi network.

  iPhone 6 s - last version of iOS from today (28 Apr 16) cannot find the exact version on my phone

  Pleaseeeeee help me connect to my VPN when I'm on my work wifi

  VPN can be difficult, maybe to consult Betternet. Also see this article for suggestions.

  iOS: setting up VPN - Apple Support

  FWIW here are some general recommendations for Wi - Fi problems, maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• How to enable VPN on iphone 4?

  Hello all, in fact I installed a vpn application on my iphone but after when I went to the

  The iPhone settings, I found their vpn option in settings > general > vpn, so now I want to know who

  How does the iphone vpn is - even as the applications available on the store for the iphone and how to configure

  I have no idea what to do what should I fill in the vpn options available when we try

  TO enable vpn on iphone?

  VPN:

  A virtual private network (VPN) extends a private network by a public network such as the Internet. It allows users to send and receive data on shared or public networks as if their computing devices were connected directly to the private network, and benefit the functionality, security and private network management policies. ^[1] A VPN is created by connecting virtual point to point through the use of dedicated connections, virtual, tunneling protocolsor encryptionof traffic.

  Wikipedia

  Better find you the developer's Web site and see what they can do with their application.

• IP NAT on the router on SSL - VPN appliance

  Someone at - it allows to transmit 443/SSL on a SSL VPN Cisco 891 - K9 unit?

  (I have never encountered this situation before as the router VPN terminated public face directly or we had several IPs public to assign the VPN device directly a public IP address).

  With ' ip nat inside source static tcp 44.55.66.255 443 10.10.10.150 443 extensible "is supposed to pass the SSL request to the appliance SSL VPN to 10.10.10.150 to have VPN applications ended here.

  But failed miserably body 891 - K9 created a virtual ARP entry for 10.10.10.150. So two MACs with the same IP address.

  So 443 requests were sent to its interface. At the hearing of NAT, I can't ssh inside SSL - VPN, but by the time the statemet disappeared, I can ssh and warning dupliacte ARP goes.

  * 1 Nov 19:22:46.871: % IP-4-DUPADDR: duplicate address 10.10.10.150 on Vlan10, a source of aaaa.bbbb.cccc
  * 1 Nov 19:23:18.083: % IP-4-DUPADDR: duplicate address 10.10.10.150 on Vlan10, a source of aaaa.bbbb.cccc
  * 1 Nov 19:23:48.295: % IP-4-DUPADDR: duplicate address 10.10.10.150 on Vlan10, a source of aaaa.bbbb.cccc
  RTR #sh clock
  * 19:24:26.487 UTC Sunday, November 1, 2015
  RTR #sh ip arp 10.10.10.150
  Protocol of age (min) address Addr Type Interface equipment
  Internet 10.10.10.150 - e02f.6d96.8dd0 ARPA Vlan10
  RTR #sh ip arp 10.10.10.150
  Protocol of age (min) address Addr Type Interface equipment
  Internet 10.10.10.150 - e02f.6d96.8dd0 ARPA Vlan10
  RTR #sh sh ip route 10.10.10.150

  Cisco TAC to reproduce this problem at the moment to report dev.

  Does anyone else have this problem or a workaround?

  Thank you.

  I may be misunderstanding but isn't your NAT statement backwards IE. If you want traffic to pass to 10.10.10.150 it shouldn't be-

  ' ip nat inside source static tcp 10.10.10.150 43 43 44.55.66.25x.

  isn't the device for SSL connection on interface 'ip nat inside '?

  Jon

• Should I apply a single to several L2L VPN VPN filter, or each VPN tunnel have their own VPN on an ASA filter?

  Currently, I am trying to decide if what VPN creation filters, if I just create one and apply to multiple VPN tunnels or if each must have their own VPN tunnel filter VPN. Creating a VPN filter for each VPN tunnel seems like extra work but do not know if this is the best choice. I looked through the documentation, but they never mention the VPN application filters to several tunnels.

  Hello Jork,

  If you add filters for each VPN tunnel group, it will be more work, but at the same, you will have more control over the external users trying to connect to your network.

  I would say that you have different groups tunnel (each of them will have their own funcionallity) therefore its depends on what you're trying to implement.

  If the people who are going to use X tunnel-group are the same as those who use the tunnel-group is then you can use the same than that.

  I hope I understood your question.

  Kind regards.

  Julio

  M Note all the useful po

• Causing disconnections Windows LAN Client VPN service

  Hello

  I have a 4.8.01.0300 client installed on a machine WinXP SP2, speaking with a VPN3000 concentrator and its working very well through the VPN. My client complained however that when you use the machines with the client installed on their local network, they get notice of ongoing disconnection of their offline files and synchronize the failures. If manually stop us the service of cvpnd.exe, the problem goes away. Affecting the service manual and start the service instantly back again the issue.

  Does anyone have this seen before or know a fix?

  Thank you

  Hello

  Please check if the dynamic firewall is enabled or disabled. Please make sure that it is disabled. To check, the client VPN application and goto startup options. You should see Stateful firewall. It must be unchecked.

  HTH,

  Kamal

• NAT, stop communication OSX VPN configuration problem.

  Hello

  It is my first time posting in this forum. I have trouble getting Mac computers (my test is OSX 10.8.2) to correctly connect the VPN to the company. We have a Cisco ASA5510, who manages the VPN applications.  Here are some details:

  -Windows computers, Cisco VPN Client (not Anyconnect) are able to connect to the VPN and access internal/etc file server computers, just as we want to.

  -Mac can establish a VPN connection, but cannot communicate with servers or internal machines. I can't connect to or ping the file server by using its IP address. Also, I can't ping my personal work computer.

  -BUT, from my work computer I CAN ping the ip address of the Mac he receives after connecting via VPN. Thus, internal Windows PC can ping external VPN would be Mac, but Mac cannot ping inner Windows pc.

  ASDM using I was able to run Packet Tracer. I got trace a ping of the machine address Windows 192.168.0.52 23 to address the 192.168.5.33/24 Mac VPN. This succeeded.

  The use of Packet Tracer to trace a ping the address VPN for Mac 192.168.5.33/24 to 192.168.0.52 Windows address 23 is not successful. The package goes through the following phases: 'Capture', 'Access-list', 'looking for route', 'Access-List', 'Options IP', 'Inspect', 'Inspect', 'Debug ICMP","Free of NAT", until it reaches"NAT"where I get this message:

  Menu - NAT Action - type

  Config

  NAT (inside1) 1 0.0.0.0 0.0.0.0

  match ip inside1 all inside1 all

  dynamic translation of hen 1 (192.168.1.1 [Interface PAT])

  translate_hits = 913403, untranslate_hits = 27

  The result is that the package is abandoned.

  Info: flow (acl-drop) is denied by the configured rule

  I'm not super familiar with ACL or NAT configuration, so I do not know what changes I need to do to make this work correctly. I find as strange as the windows pc using the customer Cisco have no problem to communicate internally after the connection, but do not have a Mac Mac built-in Cisco IPSEC VPN.

  Any help would be greatly appreciated.

  -Jean-Claude

  P.s. I have included a screenshot of the screen of Packet Tracer.

  Is your home wireless network was in the 192.168.1.0/24 subnet? If this is the case, try to change to a different subnet as you suggested earlier and see if it works.

• Access to Web applications

  Hello everyone,

  I try to access a web application resides on an internal network to internet through portal workspace 2.1.

  I added the application in the catalog simply copy the internal URL, without authentication profile. On the internet, I am able to access the user portal and see all the app and the desktop as well. No problem of access to the desktop that I put the url of the Security server in the range of external network, but when I try to access the application, another browser window are only open pointing to my internal url that is obviously not be solved.

  The question is, my web application is to be published on the internet or, as I'd hoped, is the portal of the workspace that should act as a "reverse proxy" to my internal web application?

  Thanks a lot

  
  

  ALE

  Portal of the workspace reverse not traffic proxy or tunnel to internal resources. You must connect to a VPN, publish the application on the Internet or use Airwatch with by the VPN application functionality. Workspace management law, but clients must be able to connect to the resource.

• "We cannot open Skype you are already connected.

  When this will be fixed?

  You seem to be using the Cisco AnyConnect VPN application. Try to uninstall this application.

  Beside that, I strongly recommend to update your installation of Windows 8 to version 8.1. Windows 8 operating system really is nonsense and is no longer supported by Microsoft.

• Moving head DC

  Hello

  in order to help in the design and move to the last available materials to deal with the growth of the businesses. New design should cover redundancy, growth, security and simplify management.

  our current infrastructure consists of 6506 as core + distribution, 2960 as layer access, Block WAN / Internet block block server / / handling block. In all there are 50 national sites connected via MPLS connection 30 international sites through the VPN. application of the kernel are centralized

  will appreicate some ideas for moving forward

  see you soon

  CP

  also it is best to have a distribution for users and the servers/DC for many security reasons, breakdowns, future growth and more specialised blocks separate

  the link below has some examples may help you too

  https://supportforums.Cisco.com/docs/doc-27427

  hope this helps

  If useful rates

• MS OUTLOOK with WEBVPN

  Hi all

  have a small request. I have a client who wants to access his e-mail using MS outlook client directly (& not by OWA)... I don't want to use the email proxy in the web vpn page.

  Instead, I had configured (25 & 110) port forwarding on the web vpn to the mail server page. the java applet window opens with these settings (rules 25 & 110)... I'm still not able to access web mail from the PC connected by vpn applications. something escapes me? can't do that without having to configure e-mail proxies?

  You have not specified your problem. What client (Outlook 2003/Outlook Web Access)?

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;155831

  So eager to use all the features of Outlook, you should look at Web sites on support for RPC over HTTP in Exchange 2003.

  You don't normally want to open the CPP through your firewall-jason

• Users of VPN cannot connect using application using port 3404

  VPN users are connecting using vpn tunnel to destination of a pix 515e however, they are unable to use the connection on port 3404 application. He used to work, or so I was told, but it no longer works. What I am doing wrong? Please notify. Here is the config:

  IP 192.168.0.3 - dealer 192.168.0.5 pool room

  IP pool local DYNAusers 192.168.1.2 - 192.168.1.20

  IP pool local DYNAusers2 192.168.1.21 - 192.168.1.254

  vpngroup address pool DYNAusers PCPVPN01

  vpngroup 192.168.x.x wins server PCPVPN01

  vpngroup PCPVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 PCPVPN01-time

  vpngroup password PCPVPN01

  vpngroup address pool DYNAusers WELLVPN01

  vpngroup 192.168.x.x wins server WELLVPN01

  vpngroup WELLVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 WELLVPN01-time

  vpngroup password WELLVPN01

  vpngroup address pool DYNAusers2 SRVCVPN01

  vpngroup 192.168.x.x wins server SRVCVPN01

  vpngroup SRVCVPN01 DYNAsplit of split tunnel

  vpngroup idle 1800 SRVCVPN01-time

  vpngroup password SRVCVPN01

  permit 192.168.1.0 ip access list DYNAsplit 255.255.255.0 192.168.0.0 255.255.25

  5.0

  permit access ip 192.168.0.0 list DYNAsplit 255.255.255.0 192.168.1.0 255.255.25

  5.0

  DYNAsplit list of allowed access host ip 209.42.50.82 192.168.1.0 255.255.255.0

  DYNAsplit ip access list allow any 192.168.0.0 255.255.255.0

  access-list DYNAacl 60 allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0

  Permitted connection ipsec sysopt

  Answer sheet crypto ipsec transform-set esp-3des esp-md5-hmac Dynamics

  Crypto ipsec transform-set esp-3des esp-sha-hmac To_NHP

  Crypto-map dynamic DYNAmap 30 game of transformation-dynaset

  card crypto VPNtunnels 30-isakmp dynamic ipsec DYNAmap

  map VPNtunnels 40 ipsec-isakmp crypto

  crypto VPNtunnels 40 card matches the address 150

  card crypto VPNtunnels 40 set peer 70.151.5.114

  card crypto VPNtunnels 40 the transform-set To_NHP value

  card crypto vpntunnels 40 the duration value of security-association seconds 3600 KB

  s 4608000

  VPNtunnels interface card crypto outside

  partner-30 map ipsec-isakmp crypto

  ! Incomplete

  ISAKMP allows outside

  ISAKMP key address

  subnet mask 255.255.255.255

  ISAKMP nat-traversal 20

  part of pre authentication ISAKMP policy 30

  ISAKMP policy 30 3des encryption

  ISAKMP policy 30 md5 hash

  30 2 ISAKMP policy group

  ISAKMP duration strategy of life 30 86400

  part of pre authentication ISAKMP policy 40

  ISAKMP policy 40 3des encryption

  ISAKMP policy 40 sha hash

  40 2 ISAKMP policy group

  ISAKMP duration strategy of life 40 86400

  Hello

  It is good to hear that the problem has been resolved. Please note do you have for the job?

• New to SSL VPN, can I tunnel specific networks without specifying the list of applications with Smart tunnels?

  Hello

  I'm all new to SSL VPN, and I am a bit lost... I tried to get SSL VPN to go for our company and we have been asked to deploy a completely clientless solution that will provide access to our network based on subnets. Is this possible with the chip-tunnels? I tried a few different configurations and it doesn't seem to work. It works with ANYCONNECT but we have to go without a client. They feel that we can do without customer access to destination networks. Is this possible?

  Thank you in advance...

  That's what you can do with a solution without a client:

  1. Allow access to web resources (using the url list)
  2. Allow access to the application of TCP based (using java-port forwarding or smart tunnels)

  If you have to give access to all subnets, then you will need to go full tunnel effect which is Anyconnect SSL.

  HTH