VPN testing
Hello
Here's my question. I have a 1811 being installed at the office and a 871 being installed in a home for my supervisor office. I need to create a lan to lan VPN between the two, so my boss can still connect the network to work. I have a ton of examples on how to do it and I'm testing them, but when I configure the routers, none of them work. I'm testing them in a router configuration back to back with the two outside the ethernet interfaces connected with a crossover cable. I know that when you connect via serial interfaces, you need set the clock frequency, but this isn't an option for ethernet. Could someone tell me what I'm doing wrong, or help me find a way to test both routers please? I know I am probably doing something very stupid and that's why I need help.
Thank you very much for your help
You are welcome.
I'm glad it worked.
Tags: Cisco Security
Similar Questions
-
Cisco RV042 cannot create a simple VPN?
Hello
I'm confused because I'm trying to set up a simple VPN (client of the bridge), but I can't!
A SSL VPN or an IPSEC VPN, whatever...
The RV042 firmware is up-to-date, and I try QuickVPN as a customer vpn (also updated...)
My configuration details:
I'm at the: 192.168.2.14/24
My RV042: 192.168.2.250/24
And the VPN intend to connect to: 192.168.4.x
I am currently in testing... that's why I use private IP...
Customer gateway Add a new VPN group
Tunnel ofgroup VPNGroup No. 1 Name of the tunnel: VPN TEST Interface: WAN1WAN2 Activate: Configuration of local groups
Type of local security group: Range IPSubnetIP IP address: 192.168.4.0 Subnet mask: 255.255.255.0 Remote Client installation
Remote client: Domain Name (FQDN) Email address (USER FQDN) Client Microsoft VPN XP/2000 Domain name: Microsoft.com IPSec configuration
Input mode: IKE with preshared key Group of the phase 1 of DH: Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536 Encryption of the phase 1: DES3DESAES-128AES-192AES-256 Authentication of the phase 1: MD5SHA1 Phase 1 time in HIS life: 28800 secondsPerfect Forward Secrecy: Group of the phase 2 DH: Group 1-768 bitGroup bitGroup 2-1024 bit 5-1536 Encryption of the phase 2: DES3DESAES-128AES-192AES-256 Authentication of the phase 2: MD5SHA1 Time for phase 2 of HIS life: 3600 secondsPre-shared key: 123456 so far, nothing fancy... Ok?
So I create my username for the test:
VPN Client Access User name: New password: Confirm the new password: Allow the change of password: YesNo.Active: DTSInfo-online Active
The user is created and activated...
For the test, I have disabled the firewall (router + windows 7).
A dnow, when I lunch the QuickVPN client:
Then, when I have lunch:
> Connection...
> Activation of policy...
> Verification of network...
> The remote gateway is not responding. You don't want to wait? [NO]
> Disconecting from the server...
This means that, after activation of the policy, I am connected on the router (user status: active). But when he check network... I am offline!
There is the newspaper of the RV042:
dec 18 12:57:50 2012 The VPN log description of the additional connection (qknips1) dec 18 12:57:50 2012 The VPN log listen to IKE messages dec 18 12:57:50 2012 The VPN log forget the secrets dec 18 12:57:50 2012 The VPN log loading of the secrets of ' / etc/ipsec.d/ipsec.secrets' 18 12:57:57 dec 2012 The VPN log (qknips1): removal of connection If I'm signed for 7 seconds... Why?
Can someone help me?
When I try with the built-in Windows VPN client, newspapers are filled just more... ^ ^
Help! hour
Thanks (and sorry for my bad English ^ ^)
Hello
Please use our forum
Hi Skip my name is Johnnatan and I'm part of the community of support to small businesses. I ve seen your post and I see you are using Windows 7 and that you disable your firewall to test your connection. A configuration of the computer and the router must be in order to solve your problem.
Computer
As you use Windows 7, you must enable the Windows Firewall and create 2 rules, also make sure that Ipsec communication is allowed, you can follow these steps:
http://www6.nohold.NET/CiscoSB/Loginr.aspx?login=1&PID=2&app=search&VW=1&articleid=2922
Router:
Go firewall > basic settings and
Disable: Block WAN request
Enable: Remote Management
Go to VPN > VPN Passthrough and make sure everything is activate.
I hope that you will find this answer useful, if it was satisfactory to you, please indicate the question as answer. Please note post you consider useful.
Greetings,
Johnnatan Rodriguez Miranda.
Support of Cisco network engineer.
-
Port of filter IPsec site to site VPN
Hello guys!
I have configured a VPN Site to Site, as follows: (for the access list)
Local: 192.168.0.0/24
Distance: 10.0.0.0/24
So, I have this configuration:
VPN-Test line 1 permit access list extended ip 192.168.0.0 255.255.255.0 10.0.0.0 255.255.255.0
But I would like to leave just tcp/80 on my remote to connect to my Local. (because now 10.0.0.0/24 accesses all in my 192.168.0.0/24)
How can I do? (I tried to change the list of access VPN-Test under ASDM, Configuration, ACL Manager, but no way)
I should create a rule in the external interface, such as:
Source: 10.0.0.0/24
DST: 192.168.0.0/24
Protocol: tcp/80
How can I do?
Thank you
Diego
By default, the external ACL is not evaluated for VPN traffic. Instead, you configure a new ACL that is applied as a "vpn-filter' to the group policy for your connection.
access-list VPN-FILTER-XXX permit tcp any any eq 80 ! group-policy GP-VPN-XXX attributes vpn-filter value VPN-FILTER-XXX ! tunnel-group a.b.c.d type general-attributes default-group-policy GP-VPN-XXX
In the ACL, you need not specify the networks, as the tunnel cannot carry anything other what is specified in the crypto-ACL. But of course you can enter them if you want to:
access-list VPN-FILTER-XXX permit tcp 10.0.0.0 255.255.255.0 192.168.0.0 255.255.255.0 eq 80
-
PIX 501 for Cisco 3640 VPN router
-Start ciscomoderator note - the following message has been changed to remove potentially sensitive information. Please refrain from publishing confidential information about the site to reduce the risk to the security of your network. -end of the note ciscomoderator-
Have a 501 PIX and Cisco 3640 router. The 3640 is configured for dynamic map for VPN. The PIX 501 is set to pointing to the 3640 router static map. I can establish a tunnel linking the PIX to the router and telnet to a machine AIX on the inside network to the router. When I try to print on the network of the PIX 501 inside it fails.
What Miss me? I added the configuration for the PIX and the router.
Here are the PIX config:
PIX Version 6.1 (1)
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable encrypted password xxxxxxxxxxxxxxxx
xxxxxxxxxxxxx encrypted passwd
pixfirewall hostname
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
names of
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
IP address outside dhcp setroute
IP address inside 192.168.1.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
No sysopt route dnat
Telnet timeout 5
SSH timeout 5
dhcpd address 192.168.1.2 - 192.168.1.33 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
dhcpd allow inside
Terminal width 80
Cryptochecksum:XXXXXXXXXXXXXXXXXXX
: end
Here is the router config
Router #sh runn
Building configuration...
Current configuration: 6500 bytes
!
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
no password encryption service
!
router host name
!
start the flash slot1:c3640 - ik9o3s - mz.122 - 16.bin system
queue logging limit 100
activate the password xxxxxxxxxxxxxxxxx
!
clock TimeZone Central - 6
clock summer-time recurring CENTRAL
IP subnet zero
no ip source route
!
!
no ip domain-lookup
!
no ip bootp Server
inspect the name smtp Internet IP
inspect the name Internet ftp IP
inspect the name Internet tftp IP
inspect the IP udp Internet name
inspect the tcp IP Internet name
inspect the name DMZ smtp IP
inspect the name ftp DMZ IP
inspect the name DMZ tftp IP
inspect the name DMZ udp IP
inspect the name DMZ tcp IP
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 20
BA 3des
preshared authentication
Group 2
ISAKMP crypto key address x.x.180.133 xxxxxxxxxxx
ISAKMP crypto keys xxxxxxxxxxx address 0.0.0.0 0.0.0.0
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac vpn test
Crypto ipsec transform-set esp-3des esp-sha-hmac PIXRMT
!
dynamic-map crypto dny - Sai 25
game of transformation-PIXRMT
match static address PIX1
!
!
static-card 10 map ipsec-isakmp crypto
the value of x.x.180.133 peer
the transform-set vpn-test value
match static address of Hunt
!
map ISCMAP 15-isakmp ipsec crypto dynamic dny - isc
!
call the rsvp-sync
!
!
!
controller T1 0/0
framing ESF
linecode b8zs
Slots 1-12 channels-group 0 64 speed
Description controller to the remote frame relay
!
controller T1 0/1
framing ESF
linecode b8zs
Timeslots 1-24 of channel-group 0 64 speed
Description controller for internet link SBIS
!
interface Serial0/0:0
Description CKT ID 14.HXGK.785129 Frame Relay to Remote Sites
bandwidth 768
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
encapsulation frame-relay
frame-relay lmi-type ansi
!
interface Serial0 / point to point 0:0.17
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 17 frame relay interface
!
interface Serial0 / point to point 0:0.18
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 18 frame relay interface
!
interface Serial0 / point to point 0:0.19
Description Frame Relay to xxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 19 frame relay interface
!
interface Serial0 / point to point 0:0.20
Description Frame Relay to xxxxxxxxxxxxx location
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 20 frame relay interface
!
interface Serial0 / point to point 0:0.21
Description Frame Relay to xxxxxxxxxxxx
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 21 frame relay interface
!
interface Serial0 / point to point 0:0.101
Description Frame Relay to xxxxxxxxxxx
IP unnumbered Ethernet1/0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
No arp frame relay
dlci 101 frame relay interface
!
interface Serial0/1:0
CKT ID 14.HCGS.785383 T1 to ITT description
bandwidth 1536
IP address x.x.76.14 255.255.255.252
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
inspect the Internet IP on
no ip route cache
card crypto ISCMAP
!
interface Ethernet1/0
IP 10.1.1.1 255.255.0.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
no ip route cache
no ip mroute-cache
Half duplex
!
interface Ethernet2/0
IP 10.100.1.1 255.255.0.0
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
no ip route cache
no ip mroute-cache
Half duplex
!
router RIP
10.0.0.0 network
network 192.168.1.0
!
IP nat inside source list 112 interface Serial0/1: 0 overload
IP nat inside source static tcp 10.1.3.4 443 209.184.71.138 443 extensible
IP nat inside source static tcp 10.1.3.4 9869 209.184.71.138 9869 extensible
IP nat inside source 10.1.3.2 static 209.184.71.140
IP nat inside source static 10.1.3.6 209.184.71.139
IP nat inside source static 10.1.3.8 209.184.71.136
IP nat inside source static tcp 10.1.3.10 80 209.184.71.137 80 extensible
IP classless
IP route 0.0.0.0 0.0.0.0 x.x.76.13
IP route 10.2.0.0 255.255.0.0 Serial0 / 0:0.19
IP route 10.3.0.0 255.255.0.0 Serial0 / 0:0.18
IP route 10.4.0.0 255.255.0.0 Serial0 / 0:0.17
IP route 10.5.0.0 255.255.0.0 Serial0 / 0:0.20
IP route 10.6.0.0 255.255.0.0 Serial0 / 0:0.21
IP route 10.7.0.0 255.255.0.0 Serial0 / 0:0.101
no ip address of the http server
!
!
PIX1 static extended IP access list
IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255
IP access-list extended hunting-static
IP 10.1.0.0 allow 0.0.255.255 192.168.1.0 0.0.0.255
extended IP access vpn-static list
ip permit 192.168.1.0 0.0.0.255 10.1.0.0 0.0.255.255
IP 192.0.0.0 allow 0.255.255.255 10.1.0.0 0.0.255.255
access-list 1 refuse 10.0.0.0 0.255.255.255
access-list 1 permit one
access-list 12 refuse 10.1.3.2
access-list 12 allow 10.1.0.0 0.0.255.255
access-list 12 allow 10.2.0.0 0.0.255.255
access-list 12 allow 10.3.0.0 0.0.255.255
access-list 12 allow 10.4.0.0 0.0.255.255
access-list 12 allow 10.5.0.0 0.0.255.255
access-list 12 allow 10.6.0.0 0.0.255.255
access-list 12 allow 10.7.0.0 0.0.255.255
access-list 112 deny ip host 10.1.3.2 everything
access-list 112 refuse ip 10.1.0.0 0.0.255.255 192.168.1.0 0.0.0.255
access-list 112 allow ip 10.1.0.0 0.0.255.255 everything
access-list 112 allow ip 10.2.0.0 0.0.255.255 everything
access-list 112 allow ip 10.3.0.0 0.0.255.255 everything
access-list 112 allow ip 10.4.0.0 0.0.255.255 everything
access-list 112 allow ip 10.5.0.0 0.0.255.255 everything
access-list 112 allow ip 10.6.0.0 0.0.255.255 everything
access-list 112 allow ip 10.7.0.0 0.0.255.255 everything
access-list 120 allow ip host 10.100.1.10 10.1.3.7
not run cdp
!
Dial-peer cor custom
!
!
!
!
connection of the banner ^ CCC
******************************************************************
WARNING - Unauthorized USE strictly PROHIBITED!
******************************************************************
^ C
!
Line con 0
line to 0
password xxxxxxxxxxxx
local connection
Modem InOut
StopBits 1
FlowControl hardware
line vty 0 4
exec-timeout 15 0
password xxxxxxxxxxxxxx
opening of session
!
end
Router #.
Add the following to the PIX:
> permitted connection ipsec sysopt
This indicates the PIX around all ACLs for IPsec traffic. Now that your IPSec traffic is still subject to the standard rules of PIX, so launched inside the traffic is allowed to go in, but off-initiated traffic is not.
-
Quality of VoIP BOUNCING over AnyConnect VPN problems
Hello:
I'm in the middle of the conversion of our environment of VPN for remote access of the former client VPN Cisco AnyConnect (ver. 3.1.01065) VPN's IPSec. I have a number of beta-testers on the new AnyConnect VPN environment, and we have quality problems of intermittent VoIP (IP Communicator 8.5.3 on remote laptops) with the HQ VPN. While I realize that we miss the calls over the Internet, which is a network of 'better' and can not control the Inernet QoS, the special thing is the VoIP call on the former that ipsec VPN seems to work very well 99% of the time.
I did a series of G.729 calls on the old client IPSec and customer AC, with the same laptop, using the same remote access connection. The "VPN server" for the IPSec VPN is an ASA5520 (8.0 (4)), on a connection of 100 Mbps with plenty of reserve, which runs also firewall services for an office of about 500 people and a small DMZ environment. The VPN server that is handling AnyConnect VPN is a new ASA5515-X (8.6 (1) 2), using the same channel of 100 Mbit/s Internet and running VPN services only. When you call running of tests on the old IPSec VPN, the jitter of appeal is pretty consistent, where jitter ave runs about 10 ms and jitter peak running 30-40ms. On the client ACTS, so that 'good' calls run about the same jitter as the old VPN, called the 'bad' (drops intermittent speaker, sometimes sounds 'mechanized'), which produce about 1 of evey 5 calls, run jitter ave to about 120-150ms and jitter of tip of 300-400 m for info, I don't see no packet loss to talk, just call jitter is through the roof. While in most cases, this could be written off as a "bad Internet connection", on the pretty old VPN tests prove a lot is not the issue.
That said, anyone has an idea why the quality of calls is sometimes wrong via the AnyConnect VPN? Is there pest practices that I can work from, or any settings you can recommend? Thank you.
Well, there are several things in our implementation that could help if possible, although I think you can open the case of the TAC, we saw some strange behaviors.
Things to enable the audit side ASA/SSL:
-DTLS - check if it is enabled and WORK (see the det filter name NAME_HERE anyconnect vpn-sessiondb)
see if the packets are tunneled by the DTLS Protocol not TLS. The datagram transport is much better suited for performance.
-Compression - so we see a lot of deployments with it enabled us say this as much as we can. Compression is for links to bandwidth low latency. In the modern internet, it should be used with caution.
-check the ASP drop table on ASA (fall of claire asp, run the "show asp drop' rest and during the period of low performance monitor.)
-additional recording "class... ssl connection. "can give you greater participation.
-See the proto ssl_np - good starting point count
the list goes on and.
What is important to understand, is that the problem is with the traffic on the wire or from the use of SSL.
Sniffer traces are essential.
M.
-
Clientless VPN SSL - policy of another LDAP authentication group
Hi all
I am currently working with Clientless SSL VPN. I have a problem with the creation of access to the different or blocking of users.
I created tunnel/connection-profile (WEB-VPN-TEST-Profil2) and create group WEB-VPN-TEST2. I joined with the LDAP server. I also create a map LDAP attribute to provide only specific users to access. I havn't create an address pool
What I'm trying to do is give access to the 'IL DBA' team and stop access to all the others in my organization. But to the login page when I give my password, I am able to connected even if I'm in the team "IT Network". Here's what I've done, (think I work for abcxyz.com)
=======================================================
AAA-server BL_AD protocol ldap
AAA-server BL_AD (inside) host 172.16.1.1
OR base LDAP-dn = abcxyz, DC = abcxyz, DC = com
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn [email protected] / * /
microsoft server type
LDAP-attribute-map CL-SSL-ATT-map
=======================================================
LDAP attribute-map CL-SSL-ATT-map
name of the memberOf IETF-Radius-class card
map-value memberOf 'CN = IT s/n, OU = abcxyz, DC = abcxyz, DC = com' WEB-VPN-TEST2
========================================================
WebVPN
allow inside
tunnel-group-list activate
internal-password enable
========================================================
internal strategy group WEB-VPN-TEST2
Group WEB-VPN-TEST2 policy attributes
VPN-tunnel-Protocol webvpn
group-lock value WEB-VPN-TEST-Profil2
WebVPN
value of the URL-list WEB-VPN-TEST-BOOKMARK
value of personalization WEB-VPN-TEST2
========================================================
remote access of tunnel-group WEB-VPN-TEST-Profil2 type
attributes global-tunnel-group WEB-VPN-TEST-Profil2
authentication-server-group abcxyz_AD
Group Policy - by default-WEB-VPN-TEST2
tunnel-group WEB-VPN-TEST-Profil2 webvpn-attributes
enable WEB-VPN-TEST-Profil2 group-alias
=========================================================
Please let me know if there is a question or let me know why I am still able to access the same if I did my attribure to match only with "IT"DBA ".
Thanks in advance.
BR.
Adnan
Hello Adnan,
That's what you do:
internal group WITHOUT ACCESS strategy
attributes of non-group policy
VPN - concurrent connections 0
attributes global-tunnel-group WEB-VPN-TEST-Profil2
Group Policy - by default-NO-ACCESS
Group WEB-VPN-TEST2 policy attributes
VPN - connections 3
Kind regards
-
ASA5505 with 2 ISP. Want general Internet default ISP (outdoors). Want VPN site-to-site on 2nd ISP. Base license, so I use a 'no before. I think I'm close, but I just can't get my VPN test to negotiate - don't see any attempt even when I ping to generate interesting traffic on another. Switching to 'surf' of isps1 to ISP2 works very well. Attached config. Thanks in advance.
You also need the following route:
route VPN 10.10.1.0 255.255.255.0 yy.yy.yy.1 1
route VPN 10.13.1.0 255.255.255.0 yy.yy.yy.1 1
route VPN 10.14.1.0 255.255.255.0 yy.yy.yy.1 1
route VPN 10.15.1.0 255.255.255.0 yy.yy.yy.1 1
-
871 VPN outside the conection problem
I have a router Cisco 871, which must be configured to allow outside laptops to connect to the corporate network.
I used Easy VPN ServerWizard in CCP to create the configuration.
After the use of VPN test, everything looks OK.
Unfortunatlly I can not connect hollow VPN using the Microsoft VPN (Error 800) connection or VPN Cisco Client.
Error 412: the remote peer is not responding.
Any suggestions?
Patryk,
If you want to connect by using the windows VPN client, you can define PPTP on the router and optional MPPE encryption.
Here's a good link:
http://www.Cisco.com/en/us/Tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
Federico.
-
How well Indesign works on a VPN connection?
We're a small publisher widely distributed using Adobe Indesign, Incopy etc. We want access to our server for designers from outside and focus on a VPN solution. We have set up a VPN test, and it seems to work OK for access to files, however the load and long backup times.
Is anyone using these tools with access to files via VPN in a production environment? Please let me know questions such as the reliability of file corruption or other problems. Also, what kind of non-standard configurations do you recommend for the software.
Thanks in advance to discuss this type of environment, because there are a certain number of users distributed benefits.
Sellers of the mark
And FWIW, I did it works regularly with others with all the files in a
Dropbox folder. No problem at all even to work cross-platform.
-
Install the client via a browser web w. ANyConnect Essentials license?
I wonder if it is still possible for individual users install the AnyConnect client by authenticating is via a web browser and allow the web browser to launch the installation, even if the device that the user connects to is running in mode anyconnect essentials?
In addition, a bonus question: If there are several groups of tunnel and I want the user to know the name of the tunnel group in order to connect (because I don't want to show which groups of tunnel are available), can I force a user to access a specific URL to connect to this group of specific tunnel? I did it with the premium version of the AnyConnect VPN in my lab, but still works for the most part? And what happens if the user starts the AnyConnect client and connects without using the web browser to open the VPN session? The AnyConnect client remember what tunnel group was finally to that specific device or what I have to show which groups of tunnel are available in the AnyConnect client to allow the user to reconnect to this group of specific tunnel?
Oscar
You can continue to launch web AnyConnect the Essentials installed with a license. In order to direct users to a particular group of tunnel without using an alias and drop-down, you can configure the group URL. For example, you have a tunnel group called employee and another contractor called. With the group URL, users can access the respective web portal by entering https://vpn.test.com/employee or https://vpn.test.com/contractor. For users who already have the AnyConnect client installed, you can either insert the group above url in the connection box, or you can configure a host name address and the host by using a profile.
-
ASDM does not work in the external interface
Hello
I'm new to ASA. I have ASA 5510 and strives to enable ASDM access through the external interface. but is not working for me... not. I set up a public ip address on the external interface and activated the ssh and asdm. SSH works but asdm does not work. This is a test environment, so I have not yet set up an ACL.
VPN-TEST # show version
Cisco Adaptive Security Appliance Version 8.2 software (1)
Version 6.2 Device Manager (1)
Updated Wednesday, 5 May 09 22:45 by manufacturers
System image file is "disk0: / asa821 - k8.bin.
The configuration file to the startup was "startup-config '.
VPN TEST up to 4 hours and 33 minutes
Material: ASA5510, 1024 MB RAM, Pentium 4 Celeron 1600 MHz processor
Internal ATA Compact Flash, 256 MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB
Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
Start firmware: CN1000-MC-BOOT - 2.00
SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.04
0: Ext: Ethernet0/0: the address is d0d0.fd1d.8758, irq 9
1: Ext: Ethernet0/1: the address is d0d0.fd1d.8759, irq 9
2: Ext: Ethernet0/2: the address is d0d0.fd1d.875a, irq 9
3: Ext: Ethernet0/3: the address is d0d0.fd1d.875b, irq 9
4: Ext: Management0/0: the address is d0d0.fd1d.8757, irq 11
5: Int: not used: irq 11
6: Int: not used: irq 5
The devices allowed for this platform:
The maximum physical Interfaces: unlimited
VLAN maximum: 50
Internal hosts: unlimited
Failover: disabled
VPN - A: enabled
VPN-3DES-AES: enabled
Security contexts: 0
GTP/GPRS: disabled
SSL VPN peers: 2
The VPN peers total: 250
Sharing license: disabled
AnyConnect for Mobile: disabled
AnyConnect for Linksys phone: disabled
AnyConnect Essentials: disabled
Assessment of Advanced endpoint: disabled
Proxy sessions for the UC phone: 2
Total number of Sessions of Proxy UC: 2
Botnet traffic filter: disabled
This platform includes a basic license.
VPN-TEST # http see race
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
VPN-TEST # display running asdm
ASDM image disk0: / asdm - 621.bin
enable ASDM history
Could someone please help me know what Miss me?
Kind regards
Praveen
That's it, please add any combination of encryption by using the command "ssl encryption" algorithms, please add them in one line next to each other, and you can use '? ' to check available combinations.
Kind regards
Mohammad
-
Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).
1 - my question is why his past does not?
Solution:
If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.
Please explain why.
WebVPN
allow outside
limit the cache-fs 50
SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image
enable SVC
internal strategy of group test-gp
attributes of the strategy of group test-gp
VPN-tunnel-Protocol svc webvpn
the address value test-pool pools
username, password test test
username test attributes
VPN-tunnel-Protocol svc
group-lock value test-tunnel
Strategy Group-VPN-test-gp
tunnel-group test-tunnel type remote access
attributes global-tunnel-group test-tunnel
Group Policy - by default-test-gp
tunnel-group test-tunnel webvpn-attributes
allow group-url https://192.168.168.2/test
Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.
You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.
Here is an example of configuration if you happen to have the AD and will authenticate against AD:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml
Hope that helps.
-
Hello
I had a previous post on this topic. After receipt of the resolution of the data center has added a new problem to my test plan.
The purpose of this test VPN is ping on a real server, VPN tunnel through, without the possibility of remoest cause a crash.
I have a switch 3750 L3 behind my firewall, and the default gateway is the firewall. I want to create an ip address of loopback on this unit for purposes of test for the VPN tunnel. I then will source a ping since the closure to the Ip address of the server to my remote data center. My EUGHEA links do not pass through the firewall.
By the data center, they have routing configuration that all /10.0.0.0/8 address 192.168.0.0/16/ will be forwarded to their WAN EUGHEA affair. The States of data center
I need to create a unique ip address to stock up the pings of the kind he will return the their Checkpoint fw, then the tunnel between us.
I think the loopback address might look like this 100.255.255.1/32
If I ping the ip address of server of the L3 switch with the loopback source address, it shuts down my WAN EUGHEA link because that's how routing is configured.
The question is how can I hide the destination server, IP address so that the ping does not take the EUGHEA path but borrows the fw, then the tunnel?
My thought is a 1-to-1 nat in the firewall of the server to DC.
static (inside, outside) (Server natted ip) (the current server IP) subnet mask 255.255.255.255
I then add this 'ip address of the server natted' VPN policy to the REMOTE NETWORK.
natted ip address must also be an IP outside the 192.168.0.0/10.0.0. scopes
This server natted ip address would be 100.255.254.1
Then I could ping the loopback source. natted ip address
A question I have is the remote data center will have to reverse nat on their end to allow the ping to reach the correct destination?
Advice of experts for this very important issue.
Hello
You speak of a firewall and L3 switch configuration. You also talk EUGHEA which I do not know what that means? You just talk to a separate VPN device? A simple network diagram could clear the configuration for a lot of people reading this post.
If I understand the installation program, then you have a link dedicated between your site and data center site. And you want to add is that there is a path between these networks over a VPN L2L connection also.
But if that's the case I still don't know how this VPN L2L would be used between the sites.
If you really want to get a redundancy between the 2 sites, it would be better if you can run that a dynamic routing between each connection protocol and that looks like the L3 device at each end through which link/connection, they should reach the other site.
In this configuration it seems to me that you'd have to hide the IP addresses of the two network in order to use the VPN at the same time, while the real dedicated connection is in use.
-Jouni
-
Is there a GUI, other than the Assistant Deputy Ministers and the Security Manager cisco IPSec of Cisco ASA5505/5510 test site to vpn tunnels. I usually go through the steps listed in here in the link below in the terminal window, but it sucks when you have several tunnels to keep abreast of.
http://www.nwdump.com/troubleshooting-IPSec-VPN-on-ASA/
I would have preferred one that works with Freebsd or LInux, as the cisco security manager CSM v4.1 is limited to only current running on windows server 2008 ent.
Thank you
Jason
No, for troubleshooting the best way is to use the CLI that will give you debug output on where it is lacking.
For configuration, outside the CLI, ASDM and CSM, unfortunately there is no other tool that works on Linux/Freebsd because it is more specific orders of the ASA and only limited to the CLI, ASDM, or CSM.
-
Firefox Add - ons in any way interfere with a VPN?
I recently ordered a VPN. Itgood, but has its ups and downs. I asked the same question people VPN Firefox Add-ons. They said that he "may" impede the VPN. Laughing out loud. Nothing says confidence like the word 'power '! It doesn't seem to work perfectly. Here's what I think in very basic terms. The VPN uses encrypted tunnel of . Do Add-ons in fact drag these companies, they block, in the tunnel with the Firefox browser I use? Because the Add-ons are still show the number of companies they are blocked even if I'm in an encrypted tunnel . He looks like the tunnel needs block all businesses before that add-ons a chance to see them. And I have to start all VPN, tunnel, process on my desk before even entering the browser. I know I could start the browser with Add-ons disabled. I don't know if somehow they could work even n or if they work against each other. With or without the Add - ons Firefox remains my main browser! You guys and girls are great! Keep up the good work! Nice day.
Firefox sends the exact same claims, but now, they go through the tunnel.
Don't think that the VPN as a filter, think of it as a carrier.
Instead of thinking of Web sites of your web requests from your home through your internet service provider, websites they will perceive as coming from the location of your VPN service using their internet service provider. If you visit sites that try to guess your location, you should see that they are now guess somewhere completely different. (If the sites stored cookies with your old location, then you probably still will see that.)
With this in mind, it is logical that websites always pull in all the same ads and other things. To prevent that from happening, you will still need the modules.
As to whether they will all work together perfectly, I don't know. Each user creates a unique mix, so there is probably no one in the world who can test it better that you can.
Maybe you are looking for
-
Satellite L300-245 - LAN and WLAN does not work
I bought a laptop L300-254.I installed the LAN and the LAN driveres wireless, but none of them works. What is the problem?
-
Development crossed with the VI (LV8.6) Server
I'm moving a heritage project of LV 7.1 to 8.6.1. It is a system distributed by using VI server to move data by calling a VI receiver on the other machine via a VI server. The two partners are running on different Windows PC.I do development with sep
-
I'm just curious and I need answer My acer m3 - 581 t bios 1.13 preinstalled windows 7 and acer bios t 2.17 m3 - 581 preinstalled windows 8, this pc two 2 have the same hardwareWhy acer unlock bios 2.17 the two different whit pc operating system that
-
BlackBerry smartphones can not disable the firewall - see the key for the
"The application has attempted to open a connection to a location inside the firewall which is not allowed by your policy" " Please help me...
-
Office 2010 works both in windows 8? Is really good-Windows 8 for computers without a screen touch?
Please help Im really confused. I upgrade to w7 Home premium/Profesional or wait for windows 8... I don't have a touchscreen pc: () BTW Ive already got w7 home base)