vSAN deduplication (Standard or advanced)

Similar Questions

• VMware Sphere standard vs. advanced by HA

  Buon giorno, sto leggendo proposed due delle versioni in oggetto, my non mi è chiaro it ventilconvettore di HA gia nella present standard edition utulizzato senza need tolerance advanced e della he vmotion che assicurano very it massimo della sicurezza

  Quello che I like realizzare in departure, e una soluzione a uno storage be server substitutes per i dati snapshot regular ed.

  I manage i tre server substitutes pensando di installare Server distributed virtuali su tutti e tre, e avere tell che in caso di di macchine virtuali face vcenter essere spostati evitando limitando o tramite uno it downtime down

  Quello che non capisco appunto, e is gia soluzione VSphere Standard + Vcenter mi allows di farlo (slab figure in rete vedo che in caso di down the HA only sull'altro) my non mi è chiaro is lo fa automatically, is invece e comunque manuale it downtime al traffico e solo spostamento del server.

  Gestione del fault tolerance e quindi del zero downtime assoluto the lasciare como l'eventuale wants to upgrade e sviluppo del progetto.

  Currently mi interested solo virtualizzare a series of macchine e fare in modo che is TR break how UN virtuali published nothing monitorate e macchine spostate Reed manualmente knew another server.

  By the l'eventuale risposta grazie

  http://www.VMware.com/products/vSphere/buy/editions_comparison.html

  Secondo me if

• Standard reports in Oracle Advanced benefits

  Hi all
  Could you give me a list of the Standard Oracle Advanced benefits reports. Whose responsibility will help me to run the report?
  Good response to even.
  
  Thanks to adavnace :)
  
  Basaw

  Hello

  Please see (Note: 303263.1 - is there a list of simultaneous Standard reports available benefits Advanced?).

  Kind regards
  Hussein

• Drive hard hdtb310ek3AA green / red - is the two identical HDD?

  Hello. Model HDTB310EK3AA comes in a red and green packaging. Now I have two, one is packed red, the other green. The Red packed HDD has a number of HDTB310EK3AA ACS: L A, the Red packed a college HDTB310EK3AA: P B.

  Now, these two drives are considered to be a single model? I see that the packed HDD red often tend to cost more to purchase than the packed green ones. I wonder why. Thank you. Rich.

  P.S. I have a picture that shows the colors of the packaging: Red: standard; Green: advanced and gray: Professional. Which is also to ask me.

  In any case, this is why look like than pay the higher price for the packed HARD drive in red, when you arrive (apparently) the same product packaged in green. Also, I think this model is now only being packed in green. I think that this is the case, do not know about you.

• Can I use Creative Sound Blaster Audigy2 with section 100 controller card bus

  Hello world
  Can use this sound card in over controller card bus? Standard or advanced mode?
  Tech from Toshiba, please provide the information... Thank you...

  Yes,
  You can use this sound card on your machine, shouldn´t be a problem.
  Just a quick question: what kind of machine do you have? For a good sound like this card, you should have powerful system...

  Would appreciate comments on your part.

  Welcome them

• now, I can't get my computer up I think there virus...

  now, I can't get my computer up, according to me, I have a virus... I have a notebook... it tells me to reinstall a copy of the file, l.dll... root\system32\ha windows i can't open my computer this is what keeps poping have cd can b used... once more laptop... it is only a 11 inches and no access to the CD... so know u help me.. pls

  What kind of laptop is (make and model).

  If it supports booting from a USB key, you can make a bootable flash drive that starts the recovery XP (no XP media required) Console.

  Surely someone can help you with that (how about it system engineers)?

  There is probably nothing wrong with your hal.dll file - XP only can not find.

  Unfortunately, even the 'new' Microsoft Answers forum does not have any kind of information system when a new question is asked, so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  P. S.

  You are unlikely to simply replace the hal.dll by copying a file hal.dll from another system, and here's why:

  When XP is installed, it selects and develops the hal.dll appropriate among seven possibilities of compressed on the CD of installation files:

  HAL. DL_
  HALAACPI. DL_
  HALACPI. DL_
  HALAPIC. DL_
  HALMACPI. DL_
  HALMPS. DL_
  HALSP. DL_
   
  Everyone who can be developed in a hal.dll file, so if it is your intention to replace your hal.dll, you should have to understand or know in advance which is the right one for your hardware, motherboard and processor.  If you just picked one at random, you would have a chance of one in seven (14%) to get the right pair.  You will get maybe lucky.

  Most people would simply choose the file hal.dl_ to expand, but it's the simplest, most boring, generic, and less likely to be correct of all the choices.  It might "work" but it will work hard on something very old material of the system or a virtual machine.

  The file hal.dl_ on the CD is the most boring of all:

  HAL. DL_

  * Standard PC

  It's a good choice for some virtual machines (such as VMWare), but a very poor choice for most systems.

  If I wanted to replace the file hal.dll in the same system here, I would need to expand this file:

  HALMACPI. DL_

  * Standard PC
  * Advanced Configuration and Power Interface (ACPI) PC
  * Multiprocessor ACPI
  * MPS multiprocessor

  If I wanted to replace the file hal.dll on an older system here, I would need to expand this file:

  HALAACPI. DL_

  * Standard PC
  * Advanced Configuration and Power Interface (ACPI) PC
  * ACPI Uniprocessor
  * Multiprocessor ACPI

  If you thought you needed to replace your hal.dll because your system was complaining that the hal.dll file is missing or damaged, the message is misleading, and the real problem is usually the boot.ini file and has nothing to do with the hal.dll file.

  It is also why when people trying to help you give instructions to put in your XP CD and unzip the hal.dl_ file to replace yours, it's usually bad well-meaning advice from a novice.  It is less likely to be the right choice.

  You may be able to copy one from a system with a very similar hardware and the things you can do, but chances are that you will not solve the no boot scenario.  I've never seen a corrupted hal.dll.  Seen the message, not the problem...

  That kind of help is generally going to be very bad - although it sort of logic in a first time and is 'logic', but it will never work favorably and it is usually not the problem anyway.

  I fixed the problem "missing or corrupt hal.dll" several times, but I've never needed to replace a hal.dll file doing - which is never really the problem.

• Printer HP 5520 series problems

  Recently installed a second black ink cartridge, but still not print in black. All other colours print perfectly. Cleaned the printhead using tools on the printer, but still will not print in black - print on the sheet "Clean printhead" shows all the boxes except the dark color!

  All layout print (standard and advanced) are defined as they have always been...

  Can anyone help?

  Hello

  We are here to help.

  We suggest that you uninstall the drivers and software for your printer and then reinstall. In this case, the printer still does not print black, contact the printer manufacturer for assistance.

  We will be happy to hear from you again.

• Cisco first Collaboration - what is free

  Hi guys,.

  What is the free version of privileged collaboration of Cisco? I have to deploy for a client and I saw the first Collab provisioning version available for download on Cisco, is it free?

  Can provide you any document that says the same thing. Also the special collaboration of Cisco can be deployed in HA mode using two virtual machines?

  The free versions are called Standard versions, rather than the paid versions, called advanced versions.  The law requires CUCM 10.x and later, using CUWL license and is covered in the commercial documentation of CUCM.

  There is not much difference between PCP standard and advanced design.  The main reasons to choose Advanced if you have a several cluster environment. Standard does support a call (CUCM editor) or GCE and a single message processor (CUC or CUE).  The most frequent reason is that in advanced you can delegate the management of orders for different groups of users (areas of the CFP) to different administrators.  Standard mode does not allow this. There are some additional differences as the API to the North is on in advanced as well as a workflow of order process sometimes required by large companies. Those are the main differences.

  HA is another story.  There is a general process of HA supported by the BU of PCP and PCA using VMWare HA.  HA in general was not popular with the CFP because most of the people do not believe it is necessary and choose instead a different path for the resilience. Most of the deployment in a way people distributed (app + database of VMs) and make the system of database as fault tolerant as possible/necessary using characteristic database process in the industry. The application server uses VMWare HA or FT to come up if the configuration hardware server dies for some reason any. Or is it just launched somewhere else.

  CFP has the ability to re-synchronization of network UC, UC network will continue to operate without running of PCP and the native interfaces of UC apps can still be used (PCP can catch up with the changes later), the need to spend more money and time to configure HA is difficult to justify in most cases.

  Concerning

• Throuput VPN on a 2651XM router

  Where can I find this info?

  Also, I got the used router (for nearly nothing $) but I know it's a value of some $$$. Where can I find out what model it is exactly? 'show version' doesn't show much.

  Oh sorry, pasted the link partner. This link doesn't seem to be available on a non-partner unfortunately link, so here's a copy of the relevant pieces of her:

  --------------------------------------

  AIM-VPN/BPII, is only supported in the Cisco 2600XMs. It has support for DES/3DES and AES (optimized for the AES128 only) as well as layer 3 Compression (IPPCP). This module requires ZJ Cisco IOS version 12.2 (15) and later versions.

  AIM-VPN/BPII - MORE is only supported in the Cisco 2600XMs. AIM-VPN/EPII-PLUS is supported in the 2691 and 3725 only. The BPII-PLUS and EPII-PLUS supports DES/3DES and are optimized for all key AES (AES128, AES192 and AES256) with Layer 3 Compression (IPPCP). These modules are supported in 12.3 (5 c), 12.3 (6) and later for the releases of the pipe major and 12.3 (7) T and later for releases of T.

  Q. What is the function executes the VPN Module?

  A. the Module VPN of Cisco 1700, 2600, 3600, and 3700 Series optimizes the platform for the IPSec VPN. Module accelerates not only the triple data standard (3DES) encryption and data (a) standard encryption, advanced encryption standard (AES) algorithms used in IPSec, but it handles many other tasks related to IPSec: hash, key exchange and storage of security associations. In doing so, the VPN module releases the Cisco 1700 series processor, 2600, 3600, and 3700 to run another router, voice and firewall features.

  Q. What is the maximum performance DES/3DES/AES-128 IPSec with packages of 1 400 byte for the Cisco 1700 series, 2600, 3600, and 3700 using the VPN Module?

  A. Cisco 2650/51XM with AIM-VPN/BPII or AIM-VPN/BPII-PLUS will give 10 Mbps throughput with traffic IMIX, 22 Mbpsthroughput with the packet size of 1400bytes and support 800 tunnels.

  Q. What is the maximum performance of the IPSec AES-192/256 with IMIX packages for Cisco 1700 series, 2600, 3600, and 3700 using the VPN Module?

  A. Cisco 2650/51XM with AIM-VPN/BPII will give 8.5 Mbit/s throughput with traffic IMIX for AES-192 and 256. BPII-MORE will give around 10 Mbps performance.

  -----------------------------------------

  In addition, you should know that this card was that EOL would be according to:

  http://www.Cisco.com/en/us/products/HW/routers/ps274/prod_eol_notice0900aecd802d3d0b.html

  It is still supported until 2010 and will work well for you, it is simply not fast enough with AES-192 and AES-256 as the version MORE than the same card, which was hardware-optimized especially for large key sizes. If you use 3DES or AES-128, then there is no difference in performance.

• SX20 cannot register to CUCM 8.6.2

  Hi team

  Due to the list of devices in CUCM, I know that we can install the latest device Pack to solve this problem. But I have a question is that can use us third-party SIP (standard or advanced) to save the SX20?

  I think it will be ok, but it didn't.

  Hi Jason,

  It is possible to register as a 3rd party device.

  https://supportforums.Cisco.com/docs/doc-26382

  Kind regards

  Dharmmesh

• Captivate Image button flickering 9 small and large

  Hello

  I have a picture of button that opens a hyperlink

  

  Image button successfully shows and image button has the action to hide when we click which subsequently

  

  He hides with success initially but I find myself with a small image of the button which flickers to full size rather randomly when the cursor is wound on it.

  

  Any ideas?

  Have you checked the button States? To have a "button completely disappear and be idle, you must turn off the button before you hide it. It was not necessary to output SWF some versions ago, but now, I recommend to do all the time, certainly for the release of HTML5 (which is the case here since you have a responsive project). You need a standard action advanced or shared with this sequence of commands:

  Turn off the grammar...

  Hide grammar...

• VCenter eval Operations Management Suite License change

  I'm trying the product eval, which is great BTW, but I want to know if it is away from changing the license for the eval for anything other than "the company."  I'm assuming that the eval is the full licensed version, but realistically we will buy something less.  Is there a way to change the eval to reflect the 'Foundation', 'Standard' or 'Advanced '?  I would like to see the product with the limited functionality because it is difficult to determine what are the options in which version.  Thank you.

  Hello dla123,

  Just to make sure we're all on the same page, be aware that product edition names change in version 5.6... When 5.6 released, I'll try and remember to update this message/thread with the mapping between these product editions.

  I write this, because you're talking about the Foundation, which is NOT available for 5.0.  The Foundation provides access to the Victoria Cross analytical performance Ops only, no capacity planning.  As far as I know, no license is required, but you will need to run vSphere 5.1.  Just install the VAPP, register with vCenter and you'll be good to go.

  Standard/advanced/enterprise suites include all the features of the vC to vSphere UI Ops - there is no difference.  The main difference for vC Ops Advanced/Enterprise is that you will have access to the custom user interface that offers the possibility to build dashboards that incorporate third-party adapters as well as some cards of products VMware (like Hyperic and vCD).  Standard does not provide this functionality.

  So, the short answer... to see the differences in the features of the product that you need to wait up to 5.6 is GA so you can watch Foundation (no permit required).  Otherwise, all versions of 5.6 have the same functionality in the user interface of vSphere.

• VSphere Essentials supports view 5?

  VSphere Essentials supports view 5?

  I can't find anything on vSphere Essentials can stand the sight.

  It can support the view 5?

  anycloudplus wrote:

  VSphere Essentials supports view 5?

  I can't find anything on vSphere Essentials can stand the sight.

  It can support the view 5?

  View eating 5 works with any vSphere 4 or vSphere edition 5, including Enterprise Plus, Enterprise, Standard and Advanced.View Manager works with Essentials and Essentials Plus, but visitors may not exceed the restrictions on the number of hosts associated with these packages of vSphere. View Manager is running

  the vSphere VMware and not on other platforms of the hypervisor platform only. vShield Endpoint works with view 4.5 and 4.1 vSphere, but is not supported by older versions of view or vSphere.

  Check out the source link below:

  http://www.VMware.com/files/PDF/view/VMware-view-FAQ-pricing-licensing-and-support.PDF

  on Page 3.

• Subtitles displayed?

  I'm trying to do manual captioning first CC pro 2014. I don't know why they are not visible. I saw them in the timeline panel, but are not in the preview.

  Does anyone have an answer or a reason for this?

  Thank you

  Esther

  Hello

  Please click on the icon key on the lower corner of the monitor of the program and allow the display of closed captioning.

  And if it is already enabled, please try to change the standard in Advanced Options.

  Thank you

  Concerning

  Mohd. Naseem

• Change the color of a button when clicked

  Hi all

  I'm relatively new to Adobe Captivate and created buttons that allow a users through each step with a new screen that appears. I would like to implement the buttons so one a user has clicked on one of the steps that it changes color to show that summer above.

  Is it possible through Captivate? And if so, how do I go about this?

  
  Thanks a lot for your help!

  Amanda

  The best way to achieve this is simply having two buttons in exactly the same position on the slide.  Define their colors you want.

  One button begins hidden and another begins illustrated (Visible in the output selected in the Properties tab).  When we click the button it needs to run a standard or advanced conditional action rather than just a single action as this will allow you to do more than one thing.  Whatever you want the button is one thing, the second thing, it's to hide the already visible button and display it previously hidden, this has the effect to make it look like the button has changed color when in fact you actually replaced by one single button for another.

  I would say the best type of button to use in this situation would be a form of Smart serve the value button.