VV907EA #ABU: hp g61 fails to turn on

Similar Questions

• L750 satellite fails to turn on

  I had one laptop L750 but it fails to turn on.

  Yesterday Toshiba task bar invites & ask me to the bios update, I tried twice and does not have both.
  Then I liquidated to the bottom of the laptop.

  And now, I tried to turn it on the first time after the update has failed.
  But he remains silent. Only the a/c LED and battery light is on.

  I tried to plug and unplug the adapter, but it still does not.

  Please give some advice, thanks a lot...

  Hello

  When you start your laptop, press F2 and enter the BIOS settings. If you can do this BIOS setting to default and try to start it again.
  When the same thing happen again try it please use F8 at startup. You can enter advanced startup options?

  Also, check if you have access to the recovery image and if installation of HARD drive recovery is possible?
  Check please - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  You will find a step by step explanation how to do this.

• HP Pavilion s5-1414 failed to turn on

  I have a HP Pavilion recently new model #: s5-1414.  When I plug it into the power supply, the Green led lights up as expected.  However, after pressing the power switch on the front, the green light will fade.  Also the CPU fan and case turns on momentarily and then turn off.

  I've tried a few things to debug it (mainly unplugging everything that I can get my hands on), and it turns out that when the power connector 24 pin to the motherboard is disconnected, then the power supply will remain lit after the failover of the front power switch.

  This seemss me like either my power supply went bad (after less than a year?) or some defect (short) has developed somewhere on the motherboard.  Ideas/tips for more debugging?  Any help is much appreciated-thanks a lot!

  PS - I tried the steps in Trouble Shooting Power Supply issues without a bit of luck, and there isn't really a way to ' light is on but turns off after start-up.

  You are welcome!

  It is a long shot, but I wonder if the power supply unit (PSU) has failed.  This doesn't happen often, but it is not impossible.  The symptoms may be caused by a power supply.  Here's a guide to help you troubleshoot it.

  I bought a power supply several years and it was DOA.  For example, a faulty power supply may be possible.

• Pavilion x 2 P3K81EA #ABU: BIOS Version fails to install

  HP Support Assistant offers several times the "Doritos 2.0 system BIOS version.  I select the update and it appears to download and then the installation stage takes a long time before appears a box that says that the installation has failed.

  I would not recommend installing the updates to the bios via Support Assistant. From personal experience, they fail. Go to your product support page software and drivers and check for correct bios upgrade and download from there.

• Satellite L655-128 start fail or turn on/off

  Hi there guys...

  I reserved bus and saved the ticket on the dsktop to show him that I opened my laptop to show him my ticket home history he hit my leg as I twisted around, the pixels went NUTS and off.

  Now I press the power button and the power and wifi light flash and then turn off, I connect to the mains and it shows its loading, so I try and power and the same thing happens.

  All the advice im stuck and I bought in Spain, but I am in England so abit of pain to t the shop! less than a month: () 0

  Thank you
  D

  Hello

  Disconnect the power adapter, remove the battery.
  Wait a while (a few hours) then reconnect both sides and try to turn on the unit.
  If that does not help, then your laptop has developed a hardware problem and in this case the material should be checked by a local technician of ASP.

  Perhaps it could be a motherboard problem.

• Failing to turn off the Satellite P300

  When I try to turn off my laptop (Satellite P300 with Windows Vista Home Edition), which is to end the session and cut off the power supply, the laptop restarts rather than turns off.

  How can I correct this defect?

  Satellite P300 is not the latest model laptop, and I assume that you have some time?
  Since when you noticed this problem?
  You installed Microsoft updates before it starts to happen?

  Try to define the button / stop like turn off the laptop and test whether the same thing will happen again.

• Aspire switch 10 fails to turn on

  I bought an Acer Aspire Switch 10 in Januaryand worked extremely well, after a month or so the laptop turned off and will not turn on - no matter what I do.

  The battery is fully charged, but the switch has no effect.

  long press on the button / Volume + stop

  He will get into the BIOS, and then save and exit, normally it will start without problem.

• Mini Mac fails to turn off after the upgrade to El Capitan

  Hello

  Yesterday, I upgraded to El Capitan, unfortunately, the Mac mini does not stop and Finder is unresponsive, I am at a loss and do not know what action to take, any help would be much appreciated.

  Thank you

  rachealfromva

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• 7.1.6 VM workstation fail to turn on Windows 8 after upgrade

  Hello

  I've got workstation 7.1.6 installed on my computer and I just upgraded to windows 7 to windows 8.  Now none of will to power of my vm on and I get the following error.

  "

  Not enough physical memory is available to power on this virtual machine with its configured settings.
  To resolve this problem, increase the amount of physical memory for all the virtual machines to 516 MB or adjust the settings of extra memory to enable more virtual memory machine to swap.
  If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  "

  I have 8 GB of ram and 512 MB does want the virtual machine.  Also, when I try to increase the amount of physical memory for all virtual machines, I get another error.

  "

  Could not obtain lock for writing on the C:\ProgramData\VMware\VMware Workstation\config.ini file: Permission denied.

  "

  I get this error even if I put the file for "Full control" permissions for everyone.

  Thanks for your help.

  CLN

  Single workstation 9 and higher is supported on the Windows 8 hosts.

• SRM (5.5) Test failover fail to power on multiple machines

  SRM (5.5) Test failover fail to turn on several machines withSRM failed to Test failover to power on multiple machines with the error - the timeout of waiting for VMware Tools after 300 seconds operation: 900 seconds timeout of waiting for VMware Tools after 300 seconds operation has expired: 1200 seconds operation exceeded: 1 200 seconds.

  Note: the virtual machines have updated the VMware ESXi host (protected site and recovery) tools running on the same build version.

  Here since the vmware tools are the heartbeat of VM (guest OS must load and send a heartbeat) to avoid this overall, you can also uncheck under option, so the vmwaretools would not wait and loads successfully.

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Or as the only option to get out of this recommendation is to increase the timeout value, however it has been confirmed that this behavior is that during the test above fail and real failure during work very well even if does not meet any specific setting.

  Steps to change the time-out value:

  Right-click the virtual machine in the stimulus package and select Configure.

  Go to the Start Action > Power On > wait for VMware tools.

  Change the default value of 5 minutes to 15 minutes.

  .

• Firefox crashes when you use the Google search

  BP-9a5cb747-1cc2-499E-816b-aff7a2141124

  When I try to search on Google, it will close automatically and it happened every day.

  Unfortunately, this accident involves your Norton software. Perhaps it checks links in Google results to see if they are trustworthy?

  Can you go to the Add-ons page and see if you can disable temporarily check links to see if that helps. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then locate the Norton Toolbar and a button for Options see if you can change the way it works. If all else fails, try turning it off for a few hours (Firefox can show a link to restart if necessary to disable the extension).

• Entered in initialization Mode

  My Photosmart Premium C310a all-in-one switched mode "initialization".

  I tried turning repeatedly to work with no luck.  I restarted my WiFi on several occations and uninstalled and reinstalled the HP software.

  I use an iMac with the latest OS Lion OS7.

  The printer will not be able to work with the USB conection or fails to turn off the switch.

  I had the same problem a few months ago, I just turned unplugged, waited a minuet and reconnected it, and it worked.  This time, nothing seams to work.
  
  Any suggestions?

  Unplug the power to the printer and the wall for 5 minutes.

• Z400: four short beeps

  Recently, I moved from xw4400 (second hand) Z400. The transfer was relatively easy: I moved from SSD from the old to the new computer and made a few adjustions. Everything is fine, except:

  1. after closing down (and usually before logon) a four short beeps is the herd. Computer passed all the test of the utility of diagnosis (downloaded from HP). I made two changes to the system: Add a card WiFi PCI fan fore (directly connected to the transformer unit, not MB) (not working as before - usually need to press Connect)

  2. at the time of startup, before the login screen, there is a wait of 5 to 10 seconds (black screen with a cursor in the upper left; a very short message 'Attempt to start hard drive', and then connect you). Interestingly, I tried a completely clean installation of Win 7 Pro, but a black screen remains.

  Any input will be greatly appreciated.

  Gojko,
  
  1. the Z400 sometimes will give a 4 beeps if the system is shut down, and if the power cord is pulled (or AC power supply is cut off by a switch on a power strip), then the power button is pressed a few seconds after turning off the power (with power still disconnected).  What is happening, the system will try to power upward after pressing the power button, use the small residual charge in the system.  There is not enough power for the system to start to give of false beeps "power."
  
  However, these beeps to the power down don't cause the system failure and do not prevent the system startup when the power supply is reconnected.  It looks like a failure, but it is not.
  Just to be sure, you do run on 120 or 240 VAC?
  The system has never failed to turn on when the system is plugged into a power outlet?
  
  2. a few start-up systems after a wait of 5 second or 10 with the cursor in the corner.  I don't know why this happens, but it is normal that on many systems.
  
  You said you took records previous and other elements of the xw4400.  You reinstall the operating system?  You update the drivers?  I recommend that you install the latest driver for chipset Z400 and other drivers, if you have not already done so.

• Satellite A350 - Touchpad has stopped working

  My touchapad worked well on both the system and dedicated driver (synaptics). One day I turned it off using Fn + F9 and after that I couldn't activate it. I used the pilot system then. So I installed Synaptics but he says there is no device conpatible to work with. I also tried Alps - no result. So I checked bios - Pionting Dev. is. I changed this option twice thought, it can be useful - don't. Today it is about half a year since I have to use the usb mouse.

  Yesterday, I restored the system - I had a full, independent image. It was created when the touchpad still worked. After restoring the touchpad does not work. So I decided to install the system fresh - same problem. I almost thought that touchpad is broken. However, today, I noticed that when I disconnect the USB mouse, and then between this action and touchapad sound (inform of this action) of the system works - for approx. 0.5 seconds. It moves! But I failed to turn on.

  I don't understand what's the point. I read some post on other forums. It seems that other people have same problem. They have different but always Toshiba notebooks. I think that we need professional help. Can get us?

  Sorry for my English.
  Best regards
  Evening primrose

  Hello

  To be honest I n t found other similar topics so it doesn t seem to be a common issue. Also, the touchpad on my laptop two Toshiba works perfectly and never had a problem. In addition here it s only a user to user forum where you can talk with normal people like you and me. If you want professional help, get in touch with an authorized service provider.

  In any case, a point is not clear to me: you have written on several system restores, images, etc., but what images you used exactly?

  In your case, I recommend a Toshiba Recovery disk recovery facility. The disc can restore factory settings (out of box) with all the necessary drivers and tools. After this installation everything should work properly again.
  Otherwise it s a hardware malfunction

• What optical drive is compatible with Satellite A30

  Hello

  Builtin of my DVD/CDRW drive A30-104 appear to be endangered (fails to climb most of the discs, just click a lot and trying / fails to turn upwards) so I need to go on the replacement of it. I have two questions:

  (1) the drive is listed as "Toshiba SD-R2412" and I found a lot of matches for this on eBay. However, some ads to mention a number of 3 additional digits (e.g., 202, 209 etc.) after the designation. -What this means and how to find the number of my disk (and is so important I)?

  (2) at - it a DVD burner available in the same form factor, and it would be likely to work with my laptop?

  Thanks in advance!

  Hello

  Additional portable players are numbers don't know about me and I don t know what it means.
  However, you should know that not all readers can be used in the notebook. The CD/DVD drive supports different master/slave/c-salt settings that are not editable and sometimes don't match with the laptop.

  This is why you should only use the readers recommended by Toshiba! As far as I know, different compatible readers are included in the user manual. Please take a look here!

  I found a support several readers. For example:
  TEAC DW-224TH
  TEAC DV-W22-85
  Toshiba SD-C2612
  Toshiba SD-R2412

  But as said above, check the user manual. All readers listed there

  Greetings