W2K for L20 - 101 Drivers needed

Similar Questions

• Unknown device for Envy 13, drivers needed!

  I gave my laptop a facility clean and formatted the disc (thereby losing the drivers). So far, I've installed all the drivers downloaded from the site of hp to win7 64 bit with success, except a single device is still unknown.

  The error code is 28.

  The hardware ID is ACPI\HPQ0004.

  The path of the device instance is ACPI\HPQ0004\2 & DABA3FF & 1.

  My laptop model No. envy 13-1050ef is.

  Also, is there a download for ios of envy, or will part in the near future? Because it shows whenever I turn on the laptop and is a little awkward.

  Thank you!

  Have you installed HP ProtectSmart Hard Drive Protection? It's on your drivers page:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=4063&LC=en&DLC=en&cc=us&lang=en&product=4033908

• Satellite L20-101: need drivers for videos, audio etc.

  I just reinstalled the operating system (win xp home) on a satellite L20-101 and I realized that I have no cd of drivers for the laptop. The following are marked with problems in hardware devices (Panel): Audio controller, modem, SM Bus controller, PCI controller, USB controller, and video controller. Anyone know what to do or where I can find these drivers? What I found on the toshiba site has not helped me.
  Thank you

  HI Dan,.

  Have you installed the operating system from the Toshiba CD/DVD or is it a complete installation on the Microsoft product CD?

  Kind regards

• Sam L20-101 or satellite M40X-231? Need your opinion

  Hi, I'm looking for a laptop and I hesitate between the Satellite L20-101 and Satellite M40X-231. I am aware of the differences and would like to hear user experiences.

  Thanks in advance.

  Hello

  Well, I think, between these two units, there is no major differences. Both units have a size of drive HARD and similar memory. Only the graphics card has other performance. The L20 has a shared memory graphics card and the M40X has a graphics card with the chip memory own 64 MB. In this case, if you need this device for applications of high-performance graphics (games), I'd buy the M40X. Moreover, I like the nice design of M40X. She very nice unit s :)

  Good bye

• Pavilion g6 2213 its drivers needed for Windows 7 when you run the upgrade to Windows 8.1 failed (lots!)

  Hello

  After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.

  To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!

  In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.

  A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1

  See you soon

  Hello:

  Your model is pretty easy to install W7 x 64 on.

  If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.

  I don't think the drivers wireless since the page g7z-2100 driver will work.

  Here are links to most of the drivers you need:

  First of all, download and install the AMD chipset driver and restart.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

• 15 - ac063nr: drivers needed for 15-ac063nr with windows 7 Professional

  I bought a 15-ac063nr and installed Windows 7 Professional for the job. I can't seem to find the drivers needed to make the USB ports are working on it. Any help would be greatly appreciated.

  Hello:

  I don't see W7 USB driver you need on the page of the driver and support for your laptop.

  Download, unzip and run the file setup.exe from the link below and you should be all set...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

• What drivers needed for re - activate keyboard Aspire V5-551? Multiple copies to Device Mgr: cleaning?

  What drivers need to be reinstalled (or removed) to reactivate the internal keyboard on an Aspire V5-551? The original keyboard driver where accidentally deleted.  I already reinstalled the driver Dritek RF button (Radio controller).
  Except for the internal keyboard, PC works very well using an external keyboard (or the on-screen keyboard) and a wireless Logitech mouse.  Device Manager appears to show multiple copies of the drivers. Cleaning is needed?

  Hello IronFly,

  After your comment, I replaced the keyboard and the PC now works fine.  Thank you very much for the solution.

  Moreover, I ordered the keyboard via Amazon MarketPlace, it came directly from China for a price incredibly low of c$ 17. It took 3 weeks, but the delay was worthwhile because he saved the computer.

• Need help for Presario CQ5826 drivers for Windows XP

  Hello

  I need to install XP on Presario CQ5826. The motherboard is "H-apricot-RS780L-Μatx" of Foxconn, but I can't find driver for it. Any help will be greatly appreciated!

  Thank you

  Zach

  To find the drivers for XP, you will need to visit the Web sites of OEMs making the individual components. Trying to install XP on an active AHCI system can cause you should be. It is easier to install Win XP with the BIOS SATA IDE options value.

  AMD chipset

  AMD Radeon HD graphics card

  Realtek RTL8105E (download and install 7 article to the bottom of the list)

  Audio Realtek ALC662-VC1 (check accept, click Next, select 6th item down in the list)

  Make sure to install Window XP SP2 or SP3 before installing these drivers

  Frank

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy

• Satellite L20 - 101 - Sound driver causes blue screen

  1. my laptop is a Satellite L20-101. It worked fine until yesterday when I reinstalled the system (from recovery cd) after 3 years. I have updated the bios to version 1.70 (drawn from the toshiba site). Devices audio conexant could not be recognized, and if I run the installation of the latest audio drivers (sound-20080604145033), it fixes the problem, but when you restart the system and login as administrator I get a blue screen. Any help pls?

  2. given that the LAN card is working, there is a message for the installation of a driver for a network device!

  3. when the system starts up, I get an error 0 x 57 for toshiba power saver. Even when I reinstalled ver 7.03.02.I from toshiba Web site the problem remains.

  Thanks in advance
  Maxco

  Hi maxco,.

  About its pilot I n don't know why you're getting a blue screen with the latest version, but I advise to use the preinstalled version of Toshiba recovery disc. So try a point-to-point previous system restore.

  Driver LAN and Toshiba Power Saver, you can download from the official site. Relocation of these tools should work!

• Satellite L20-101: Question on battery & BIOS password

  Dear Sir or Madam:

  I have a Toshiba laptop satellite L20-101, so can u please answer my questions below.

  Is it better for the battery life to always stay connected to an electrical outlet when possible, or charge the battery and then use it until it needs to be recharged again? I mean what is best for the life of the battery, and I need to know if stay connected to AC power affects the battery life.

  How can I set a password for the laptop not windows? Because when I enter BIOS setup and set a password for user and supervisor. He just ask me about this password when I try to login to Setup again, but it is still continuous to the windows boot without asking me about a password.

  What should I do?

  Kind regards

  Hello

  The fact is that you can charge/discharge the battery about 500 times.
  After this period, the battery will lose performance.
  More recent laptops and batteries use the latest technology of load.
  But I recommend to remove the battery, if you work on the DC for a long time.
  In this case, you can extend the life of the battery and the performance

  Please also check other topics on this topic like this.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13088&MessageID=47924

  If you want to set the BIOS password and it should appear at the beginning, you must activate the password at startup option in the BIOS.

• Satellite L20 - 101-, the fan won't turn on when starting.

  Hello!

  I found that the fan on my L20 lights during startup (for the first few seconds). All started about 3 weeks ago. Sometimes it can be sometimes not. Than you think. Can be a serious problem? Perhaps it is caused by a weather? In the BIOS I chose "performance" mode

  L20 - 101, Pentium M (1.73), Intel GMA915, 1 GB of RAM

  ;)

  Hello

  I don t think that this could be a serious problem!
  Usually, the fan starts to turn if a temperature level has been reached.
  The temperature inside the laptop depends on the use of the laptop

  You can also consult the laptop for dust and debris fans. Dust inside the laptop may have a bad influence on cooling performance

  But do not worry, everything seems to be ok ;)

• Satellite L20-101: I think as 667 Mhz module runs only with 266 Mhz

  Hello

  I bought 2 x 1024Mo DDR2-RAM for my L20-101.
  First I tried 533 MHz, but the laptop does not work with them, so I bought the
  Version of 667 MHz.
  CPU - Z says that the FSB:DRAM - ratio is 1:2 If the two are in fact run with just 266 MHz.

  I've updated the BIOS with the latest version of the Toshiba-home page, but nothing has changed.

  So finally, my questions:
  1 perhaps CPU - Z is false (I don't think so...), are there any other good programms to check the parameters of memory?

  2. If the values in the program are correct: where can I change the value of the report? Is it possible to see more than a few settings in the BIOS or is it a rider?

  Thanks for your help

  Hello

  First of all it is important to mention that the Satellite L20-101 supports a FSB of 533 MHz.
  So the DDR2 400/533 256 MB (PA3389U - 1 M 25) and DDR2 400/533 memory modules 512 MB (PA3412U - 1 M 51) should work and are 100% compatible!

  If you use the module of 667 Mhz, it runs only at 533 Mhz due to the limitation of the front side bus.

  In addition, I think you have misunderstood something.
  Here are the modules DD2 and so the CPU - Z recognizes the speed of the modules as 266 MHz (2 x 266 = 532 Mhz)
  If everything seems to be ok!

  PS; You can also use the other tool called Everest home edition. It s a freeware and very useful to run a diagnosis system and equipment

  Greetings

• L20-101 problem with bootable disks

  Hello!

  I have a problem with bootable discs. I try two disks bootable, that have been successfully tested before in other systems, but my L20-101 does not start with them.
  After the startscreen, there is just a white screen.

  is this a general problem with the L20-101? the installation of the update of the bios to version 1.80 had no effect.

  does anyone have a solution?
  Thank you

  Hello

  The boot disks you are using?
  Have you tried to start with other drives for example with the delivered Toshiba Recovery CD or the original CD of Microsoft Windows?
  It would be very interesting to know if there is a problem disc or unit.
  Please check if pressing the C key allows you to boot from the drive.

  Good bye

• Satellite L20-101: can't see my WLan access point

  Hello world

  I have a L20-101. It worked well until we change our AP with 802n Apple AP again. I can see any other network, but I can't see mine.
  Any idea?

  Thank you

  Hello

  Yes, I have an idea ;) How about you change the WLan card?
  Seems that the new access point is not compatible with the wireless network for laptop card.
  Maybe the minPCI wireless network card does not support the standard wireless access point.

  What do you think?