W2K3 VM will not see the mounted CD/DVD images

Similar Questions

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• WM 11 will not see the video of the WMV files but will MPG

  WM 11 will not see the video of the WMV files but will be mi/gal.  He plays the sound but not the image. No error displayed either, just this psychedelic carp.

  Hi Tammii,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  This can happen due to the acceleration of video material for the game in the drive try reduce (or cut) great video acceleration by following these steps.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on Advanced settings, click the Troubleshooting tab, and then click change settings.

  (c) note that some video card drivers do not allow allows you to change the settings.

  (d) move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 2

  This may also occur due to the missing codec required to run the video file.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Method 3

  If the previous step fails then try to update the drivers of graphics card on the computer by visiting the graphics card manufacturer's website, download and install the latest driver and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my DVD player will not see the disc of Windows 7 Installation?

  The TEAC DV-W58E DVD on my Dimension PC drive will play videos and games and will read and write data on DVD.

  Why he won't see the Windows 7 Installation disc that has delivered today? It's the only drive, that he has never read. He don't think that the drive is empty, sees just 0 used bytes, free 0 bytes.

  The drive is seen by the two other PCs but not one I want to install W7 on.

  My PC runs XP Professional and the Windows 7 Upgrade Advisor test and is up-to-date with Windows Update and has the latest driver for the DVD drive.

  I can't install the new operating system unless I can get the PC to read the disc.

  Cause the most likely not to read the DVD, is that its firmware is too old.  Double layer and encryption more recent methods are old 1 x, 2 x and 4 x dvd drives cannot read 16 x media recorded.

  Windows 7 has some minimum requirements.

  Windows 8 adds a lot of SPECIFIC requirements as NX Bit is supported in the BIOS.

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit), this excludes most INTEL 815 chipset

    Pentium 3 systems.  512 Meg is MAX for the 815 chipset.

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • DirectX 9 graphics device with WDDM 1.0 or higher driver.

• ESXi 5.5 will not see the data store when it is installed on the HP SD flash card

  Today, I installed an HP 4 Gb flashdisk on a new server HP ML350p gen8 Bion P72 (most recent). This server contains 4 300 GB SAS drives in a RAID5 configuration with 1 logical drive. This drive works fine. When you install a Windows Server live on this subject, the logical drive that appear.

  Installing ESXi 5.5 I choose 2 location to install to, a SD flash disk and the logical disk of SAS. I installed it on the SD flash drive. But after that I started the vSphere client and any data store is seen here. The RAID5 logical drive is not there.

  During installation 5.5i directly on the logical volume Raid5 ESXi, vSphere sees the logical volume and can use it.

  How do I install ESXi 5.5 on the SD HP flash disk and use the logical disk as data store? Why I can only see the drive now?

  THX!

  1. it works both on customized HP iso and ISO VMware 5.5i

  2 when installing ESXi 5.5 on the RAID 5, the rest of the volume, she prepares as VMFS, because it is disk0'.

  If you do not use the raidvolume for the installation of VMware, you must configure it in the vSphere client. There, you have to format the raidvolume.

  It does not work.

• My imac has os10.8. hp5510e printer. router hg532. He will not see the scanner

  Spoiler (Highlight to read)

   

   

  Although the printer print wireless, the scanner reports that the scanner is not found.

  HG532 routers do not using "multicast", is the problem?

  Probably the router either do not support multicast or does not support the Hello (mDNS) or does not support it properly.

  Try restarting the router by pulling its plug momentarily.

• Why Firefox 5 will not see the Windows Media Player Plugin?

  Hello useful Mozilla expert,

  When I click on a link to play a standard WMV video in Firefox 5, in the movie player window it is said 'Click here to download the'.

  When I click on 'Click here to download the plugin' in Firefox 5, I get a panel of Firefox that says I need to Windows Media Player 11, but I already Windows Media Player 12 and the browser Firefox WMP plugin installed on this computer... it worked fine in Firefox 3.6.

  If I then click to install the Windows Media Player 11 plugin, it goes to another Firefox sign that says: ' no plug-ins have been installed, Windows Media Player 11 - no available '. Then, there is a "manual install" button, and when I click, it takes me to a third party plugin site called 'InteroperabilityBridges.com' which has a plugin Firefox WMP dated April 2007 available.

  Here is the link he gives... http://www.interoperabilitybridges.com/Windows-Media-Player-Firefox-plugin-download

  When I check my Panel "programs and features" in Windows 7 on my control panel, I can see that I have already installed something called, "Windows Media Player Firefox Plugin" installed and it is dated 10/24/2010 and it is version 1.0.0.8

  Despite having already the required plugin installed and showing in my control panel, programs and features, this WMP plugin does not appear on my plugins Firefox 5 Panel. So I tried to re - install with the installer of origin and available to the above URL Setup (they seem to be the same, except my installer of origin has a date of 2010).

  I also tried the 'fix' option in the setup of the plugin... it still does not appear in Firefox 5, nor this browser will play a WMV file in the integrated test related troubleshooting page plugin Mozilla WMP player, or other pages that embedded the WMV players.

  So the question is, why is Firefox 5 demanding I install a Windows Media Player plug-in older, version 1.0.0.8 of 2007 when I have already installed...? and why it won't work?

  I went through all the troubleshooting information in Mozilla and go to the page dedicated to this subject and nothing works...
  https://support.Mozilla.com/en-us/KB/using%20The%20Windows%20Media%20Player%20plugin%20with%20firefox

  http://KB.mozillazine.org/Windows_Media_Player#Missing_plugin

  http://blogs.technet.com/b/Port25/archive/2007/04/16/Windows-Media-Player-plug-in-for-Firefox.aspx

  What is the solution? The upgrade again for the 3rd time in the last 2 months, this is not an option... I'm tired of going through all the difficult steps of the upgrade and find what has changed and rejected another upgrade of the browser Mozilla and re - install plugins, extensions, modules and customizations and repair everything that does not work, as I always do now with Firefox 5.

  It seems that as soon as I get most things squared away in a new browser from Mozilla, then they came out with three new releases, so when I'm still struggling with the FF5 version (as I am now) there will be version 9 I get annoying constant 'reminders' upgrade to.

  Thank you

  Digi

  You carefully read and follow the instructions in the 2nd and 3rd paragraphs in the article on the creation of a folder \plugins folder installer of Firefox and copy the C:\PFiles\Plugins file in the newly created folder?

  • http://KB.mozillazine.org/Windows_Media_Player#Installing_the_new_plugin

  Worked for me.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• I have a jrl system plotter/printer and driver for windows 98, but my new windows xp will not see the tracer. I used add printer/fax to install, but when the final 'Finish', he could not install. Help, please

  I have an old windows 98 are dedicated to this plotter and it work fine until we have upgraded to the new machine with windows xp.

  Hello Dzuco,

  Thank you for your message.  You will need get a driver xp for printer/plotter.  Pilots are produced by the manufacturer and are usually downloaded from their Web site, however, I can't seem to find anything online to JRL Systems.  I recommend you contact JRL systems for the suitable driver for your printer.  You also have the option to search the Web for 'plotter jrl systems printer driver.  Don't forget that some 3rd party software can contain viruses and malware, so take precautions by downloading and installing the 3rd party software.
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Guest OS will not see the network

  I have a new ESXi 5 host running.  I can connect to the host with the vsphere client.  I created two geust, a Windows XP OS and a 2008 Server.  I can't get a DHCP address on one of them, when I put a static address, I cannot ping anything other than the host machine.  Can not ping gateway, DNS, etc...  Also, I don't do a ping guests from a workstation on the network.  Any help would be appreciated.  Please let me know if you need other information.

  Thank you

  Mike

  Welcome to the community,

  This is often seen with managed switches. Please ensure the security of ports (for example the office mode) is not enabled on the physical switch ports. According to the model of switch, you must configure switchport access mode and spanning tree portfast for ESXi uplink ports.

  If this is not enough, please provide details on the current configuration of the network (physical and virtual).

  André

• DVD rom will not read the original (only) dvd.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  There is a message that says that it can not switch on analog copyright protection and a new driver must be installed. I don't know how to do in this regard. He used to play anything, and this problem only occurred after someone tried to install software for the 3D map. The operating system is Windows 7 Service pack 1. Kindly help.

  ====================================================
  If it is a recent issue, it may be worth trying to do
  a system restore to an hour before the beginning of the question.

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  More info...

  The free VLC Media Player may be worth a try...
  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.7 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• iPhoto will not see all the pic. on the iPhone.

  After installing a new hard drive in the iMac, due to the failure of the original installed, I struggle with having on the iMac iPhoto to see pictures on my iPhone that are older than October 2014. Photos are visible on the iPhone, but iPhoto will not see them which allowed me to transfer and secure them on the iMac. The iPhone is connected to the iMac with a cable to the USB port. Thanks for supporting.

  iPhoto can only see the photos that are in the film.  The older photos have been synchronized to your iPhone using iTunes? Then you can download them in iPhoto. Sync photos from your computer to your device via iTunes - Apple Support iOS

  • You cannot re-import photos synced from your computer to your device to your computer. You can only import photos from your device, or record, in your device to your computer. If you need recover photos synced from your device, send photos of the unit yourself. Then download the photos from the emails on your computer.

  If the pictures are on the Filmstrip, but iPhoto does not always show them, try to upload them to launchinh Capture of Image. It is downloadable from your iPhone to a folder,

  Another reason for only a few photos in iPhoto could be iCloud photo library.  If iCloud photo library has been activated on your iPhone, you can only import those photos that have been uploaded to the iPhone, but not the photos in iCloud. If iCloud library is active, download from iCloud.

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• How to open a document illustraor silently, so that the user will not see it

  Hi all

  I work with Illustrator CS5 and you want to import a picture (files HAVE) documents Illustrator in another document. When I tried event file-> place work file converted to pdf object. Are there other ways to import the work as it is in another file.

  A work around is: to open files in Illustrator, copy content to the Clipboard, paste it into the desired document layer, close document.

  But I need to open these documents in silent mode so that the user will not see them. Is there a method to open the illustrator silently files?

  Please report a solution or any suggestions would be welcome.

  Thanks in advance.

  
  D.

  Ok. To open a document in your own format in silent mode, you register your file using AIFileFormatSuite::AddFileFormat format. Then in the GoFileFormat Manager, you treat the document, and then return an error code, e.g. kBadParameter. The document never appears and Illustrator shows no error, but you treated the file data. You then extend this technique to work with the files have.

• PC will not 'see' Mac on the network wireless

  I just installed a Linksys WRT54G Router, and created a home network, which includes free Wi - Fi for my MacBook Pro.  The ethernet connected PC does not 'see' the Mac.  I know they are connected from the Mac can access the internet and can see files in folder on my part that I installed on the PC (after I have provide the password).  I'm running VISTA on the PC.  The network is set up in a private capacity.  In the "Network and sharing" screens on the PC, the network discovery and file sharing are on.  I checked with my internet provider to ensure that their safety programs are not the issue and found that starting the PC in safe mode doesn't change anything.  The card network and sharing or full view map only shows the PC, the name of the network and the internet.  It never shows the Mac well that the Mac indicates the network name as its connection.  Can anyone help or is it a problem that can be a gazillion things?

  Hello

  I suggest you to see link and check if it helps:

  Mac 101: File sharing

  http://support.Apple.com/kb/ht1549

• Preview will not open the hyperlink to the specific DOI PDF format

  Hi all

  I generated a PDF of markdown by Pandoc (with xelatex as the tex engine); the PDF document contains hyperlinks URLS. One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160. In Adobe Acrobat Reader, this link accurately opens in Firefox (my default browser) and is then solved using a DOI Manager that I have in firefox. Overview, however, will not open the link. When you click, you get just that boing sound error.

  I believe this may have to do with the security aspects of preview that are cooked in the program - what kind of overview is able to open external files. There was a discussion on this here, but it is not exactly answered my question: https://apple.stackexchange.com/questions/119299/why-preview-app-refuse-to-open-local-lien-dans-un PDF file.

  If this isn't a connected safety side overview, is it possible to adjust preferences overview way treats the links that start by "doi:"? Other ideas.

  Note: I know there is a better way to include the Doi in Tex docs (with the DOI package) as the starting URL by "doi:" but I like to keep my Markdown as clearly readable as possible and does not markup inside latex. I might add a Pandoc filter for this - but I would rather understand the problem of this end if possible.

  Thank you!

  ... One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160.

  This address SHOULD you present is only the persistent identifier. To make a connection, precede the string with the http://dx.doi.org/ url so that your example is http://dx.doi.org/10.2307/488160

  Basically, the url is a program of resolution. By including a DOI link, there is no need for the Manager/addon Firefox DOI. You can have the text that is displayed differs from the URL. In other words, the manuscript shows doi:10.2307/488160 but the underlying url link is http://dx.doi.org/10.2307/488160

  You can see the particular style guide that you must follow to display format specifications. For example, see details for APA style.