Similar Questions

• How can I recover my wifi/wireless Intel ProSET software after I uninstalled the upgrade to Windows 7?

  I am trying to install Windows 7 as an upgrade to Windows Vista, and it tells me that I need to uninstall my wifi/wireless Intel ProSET software (I have a Toshiba laptop, A350).  I hesitated to do it, but finally I uninstalled the software and of course now do not have internet.  I know that I can connect my modem for internet needed tough (via USB), but first I have some questions about the wireless...

  (1) because I lost my connection Uninstall wireless, I tried to get it back and didn't know how else do a restore of Windows.  I tried to restore to a restore point before I uninstalled the software, and then restart it says that Windows cannot restore because of an unspecified error.  What could be this error?  I tried several restore points and I get the same error.

  (2) how can I get the software reinstalled if I want to stay with Vista for now wireless?  Do I need to download it from the Intel site?  I can't find the software Intel ProSET wireless wifi on my computer.

  (3) if/when I install Windows 7 correctly, it'll reinstall my driver wireless automatically or do I have to manually reinstall software ProSET Intell wifi from the Intel site?

  Thanks in advance for the help!

  See http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK or the local Toshiba site. The software you need is available for download.

• Intel Chipset Software Installation Utility, v.9.1.1.1019, A01

  Nobody knows exactly what this update: Intel Chipset Software Installation Utility, v.9.1.1.1019, A01 addresses? What fixed it? I ask his stated as critical.

  Detailed description

  Want to save time? You are not sure if you need this file?

  Run this easy to use Intel® Driver Update Utilityand it will be 'automatically' you tell if you need to update your chipset INF file and if so, will prompt you to install and you're done. This will save you a lot of time not only on your chipset download but the most common files needed for your system.

  Name changes:
  Intel® Chipset Device Software is the new name of the Intel® Chipset Software Installation Utility; We will see this name when you run the installation package.

  About this file/download:
  Intel® Chipset Device Software installs of Windows INF files. An INF file is a text file that provides the operating system of the information on a piece of hardware on the system. In the case of the current Intel Chipset Device Software, this information is primarily the name of the product for the piece of hardware. This allows the operating system to show the correct name for this piece of hardware in Device Manager.

  * Important *.
  Intel Chipset Device Software installs not AGP or USB drivers. DO NOT DOWNLOAD THIS UTILITY IF THE MANUFACTURER OF YOUR DEVICE TO CORRECT A "PILOT AGP," RECOMMENDS "AGP GART" OR "USB DRIVER" ISSUE; IT WILL NOT FIX YOUR PROBLEM.

  Please read the attached files before installing (Readme.txt and ReleaseNotes_9.4.0.1017.htm)

  Key words: 82801, ICH, health child and maternal

• Only install the drivers or Intel ProSet software?

  I just ordered the dual band WiFi Intel 7260HMW card to replace the installed Realtek RTL8188EE shit. (I still don't understand why the Realtek card does not call 130mps.) There are two options for installing this card and it's drivers. You must install it with the Intel ProSet software that controls all functions of the computer's wireless and the other with only drivers. If someone has installed this card, and if yes which option did you select? Why?

  Thanks in advance.

  Scott

  Interesting thread in the link you provided. It's always nice when someone else confirms that a WiFi adapter works in a specific notebook.

  The Intel ProSet software and the driver will not negatively affect what anyone. It will improve your wireless experience with the adapter.

• Want to 6 1010sv: Intel rapid storage 10 Windows software/driver

  Hello everyone!

  I noticed that Intel Rapid Storage process (32 bit) crazy sometimes, consuming a lot of CPU and RAM. In addition the control application storage quick, accessible via the Control Panel does not start. I would like to reinstall the drivers.

  Do you know the correct driver win10?

  Is there an official driver of HP? HP has failed so far nothing on the section of the driver.

  That's all for now.

  Thank you!!!

  Hello!

  After experimentation and testing, I think I found the solution.  Install the latest driver from here . It is the latest version of the Intel RST pilot. It will also update the drivers in Device Manager. Just make sure that your computer uses the technology of fast storage.

  Unfortunately, I found an official driver of HP...

  Before installing, enter the BIOS and check if your SMART response and RST settings are enabled.

• the trigger for camera AVT Pike-based software

  Hello

  I'm using labview 8.5, as well as the acquisition of vision (IMAQ-dx, latest version) software, to control a cross beam motion detector and AVT pike camera using a high speed cable IEEE 1934 (800mbps) b.

  I wish to have a trigger internal (software) control system and have no problem to get Boolean cross beam sensor signal or run indepedently of the camera (about 300 FPS).

  The problem is the trigger.  I have a problem with where to put the camera vi in the relation to the probe wiring diagram.  In the image as an attachment, I have the sensor in a loop and the camera, in a nested loop.  However, when I trigger the camera manually with a push button, the sensor stops running.  And when I try to control it with the sensor instead of the push button, I can boot, but cannot stop the camera.

  Basically, I just want to know if there is a method of internal trigger to control camera image recording.

  Thank you for your time,

  Veritas

  Ah yes! just before I read your reply I tried... and it certainly helped.

  Thank you!

• Serial number of my camera problem getting the software.

  I have a Canon Powershot SX110 IS digital camera that was given to me by a photographer. It doesn't have the serial number for her, and niether is it on the camera as it should be. It is unreadable and I want the Zoombrowser Canon offers free of charge, but to get it for free, I have to enter the serial number. Is it possible that I can get this essential software without a serial number or necessary?

  Hi Matthew,

  I recommend you contact Canon support & see if they can provide you with the serial number of your camera:

  http://USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Hope the helps of information.

• Re: Want to get rid of Toshiba software pre-installed on the Satellite L650-165

  Hello

  I just bought my Satellite Pro L650-165 and there are a number of software programs that come pre-installed with it.
  Such as Toshiba Tempro, Eco fashion, Technology Council etc etc.

  In view of the fact that I'm going to use this for my University I run many intensive programs of ram above.
  So, I want to free all the ram, I can by uninstalling all these utlities.
  I know what you think... Yes just because they are installed does not mean that they are running. But is it safe?

  I know it takes but still ask. I just want to stay with windows7 plain ol' less all software 'cool '. precautions?

  Oh and even though I created the recovery discs using the utility built into the to do... I thought ordering a Toshiba too. where to go for this?

  > If I want to free all the ram, I can by uninstalling all these utlities.
  I know what you think... Yes just because they are installed does not mean that they are running. But is it safe?

  Although these tools are installed, this does not mean that they would be running in the background and lose some of the RAM.
  I wouldn't recommend uninstall these tools but to turn it off auto-start.
  How to do this? ESay
  You can do it in msconfig.

  Run msconfig and go to the Startup tab.
  There you can uncheck just tools that you n t need initially.
  Save the changes and restart the device.
  If you need one of the tools again in the Startup tab, then you could do it

  Notes; Disabling in msconfig process does not mean that you couldn't manually start these tools
  Disable tools (process) in msconfig means ONLY that these tools would not launch automatically when windows starts.

• Want to m6 - 1158ca: Intel Centrino Wireless N-2230 keeps abandon the connection unless a specific driver version is used.

  Regarding N-2230 INTEL CENTRINO WIRELESS CARD ON YEAR WANT M6 - 1158CA

  OK, my computer was sent to the shop for the following reason.

  Wireless guard fall on me unless I use the driver coming from a clean factory HP restore.

  The driver in question works is: INTEL 15.10.3.2 - published on 08-22-2013

  Driver INTEL 15.5 version works as well.

  All other versions, including the latest intel pro wireless drivers, I have connectivity problems and they are pretty bad. I have to keep resetting the wireless adapter every 5 minutes or sooner!

  Makes me think of what follows. Is there a problem with the card, OR are these drivers specially configured to work with this card.

  It is not supposed that the drivers of the latest and should not work - unless the card begins to intermittently fail. I say this because the WLAN MODULE check past in BIOS diagnostics. But just becaused it HAPPENED, doesn't mean it isn't bginning to fail. I doubt that the diagnostic program looks at every single circuit on the map to see if it works or not.

  So, I put the question you guys. Because, if the technicians decide to change the map and put in a different INTEL CENTRINO WIRELESS N-2230, I'll have the same problems.

  And you might say: so what's the problem? Just use drivers that work!

  And I say good idea BUT these are drivers of Windows 8 and I want to use WINDOWS 10 and the pilots Win 8 will not / should not work. And which provides updates of Windows drivers do not work. And HP does not Windows 10 drivers for this model of computer. They rely on Windows update.

  So, from being as tech PC since the beginning of the 1990s, I think I know what I'm talking about.

  But, no man is an island of information on their own, so I put the question you guys and see what you're saying!

  Thank you.

  I think that I found a solution to my problem.

  First thing to note is that I am running on battery power.

  The solution seems to be the advanced power setting options for the adapter wireless performance MAXIMUM average energy saving.

  Once I did, I had connectivity again!

  Now let's see if this solution works for Windows 10.

  This solution applies to Intel 15.18.0.1 driver version

• Re: Satellite L350 - cannot install Intel Chipset Software utility

  I got my Satellite L350 for about 3 months now and gave Vista my best shot and he still hates.
  I'm trying to go back to XP (care warranty issues). My problem is the following: -.

  Windows XP installs OK but trying to install the Intel(r) Chipset Software Installation Utility ' "INFINST_AUTOL.". " EXE', I get the following message.

  + "This application has failed to start because the application is incorrect. Reinstalling the application may fix this problem ' + '.

  Strange message as this is a first time installation I'm doing. I have re-uploaded the file twice in case it was corrupted.

  Without these .inf files in place, several pieces of material wont recognized under XP.

  Someone at - it an idea of what's going on?

  TIA

  Hello

  What L350-xxx you have exactly?
  Have you downloaded this page of the European driver Toshiba Intel chipset utility?

  Feedback would be appreciated!

• For cameras Baumer vision acquisition software

  I have the EXG50 Baumer GigE camera.

  On their website I found that it is supported by

  Vision acquisition software 8.5

  This means that it is included in later versions with Vision acquisition as well.

  Or should I only use this version for the camera?

  Is the reason I ask: I have the Vision Aqusition worm 8.6 software.

  It works with the camera in MAX, but there a number of controls on the camera and picture on it has gone from left to right. Please see image attached.

  I had similar problem. Deactivation of the resolved song data. Thank you.

• Error Microsoft Life Cam "a later version of the Webcam Live software is already installed, to reinstall the life CAM software, you must first uninstall the CAM of your computer software."

  Dear Mircosoft
  I just bought the Microsoft Live Cam VX-2000.  You are able to help.
  I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
  I'm not very user-friendly computer.
  I get a green flashing on the camera.
  I can't use it in Skype.
  Thank you
  JO Smith

  Hi josmith416342,

  ·         You have installed all software associated with the device?

  ·         Do you have any device life Cam earlier?

  Check to see if the following is useful.

  Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.

  How to change or remove a program in Windows XP

  Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• Utility Intel chipset software installation blue screen

  Hi, I recently decided to install this utility but encountered a blue screen. I did all my files INF. Update tool, but when the installation reaches the Intel ICH9 Family USB2 Enhanced Host Controller - 293C the closed laptop - a blue screen with white text appeared. A USB composite device is connected to the host controller. I thought that this composite device may be causing the blue screen and tried to uninstall or disable it but sameblue screen apeared. Is there a problem with the Intel host controller or with the Chipset utility?

  I would be very grateful if solve you my problem!
  Some information on my PC:
  OS: Vista Home Basic (build in Service Pack 2)
  Chipset: Mobile Intel 4 Series Express Chipset with integrated graphics
  RAM: 2 GB

  Thanks for the report of BlueScreenView.

  Please replace the camera driver with a new copy on the Dell site.  There is no need to have a device without driver - as it will cause problems that elsewhere also.

  Once the drivers are replaced, if you still have problems BSOD - then we must suspect the camera itself (a hardware problem).

  But there are many other things for us to test before you leave us on the drivers.  FWIW - I had problems with this driver to work before, and I may have a few "tricks" up my sleeve because of this.

  Let us know if there are problems to obtain or install the drivers and I'll see what things are needed.

• Windows xp was crushed want to install windows 7, what software do I need?

  lost windows software program.what do I need to fix computer? Thanks for any help received.

  Windows XP was crushed, so what should we do about this part?

  If you have no valid evidence of a license of previous qualifications, you will need to purchase a Windows 7 full version license:

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Firefox wants to add something to my software, but I would like to know what it is and why do I have to download it.

  I didn't make a copy of the message that I had, and now it does not come to the top. He just showed twice on my screen when I open Firefox now (10/28). So, for now at least, I don't have the details, but I would do this more general: I would like to know what I get anytime, I get a message from Firefox there is something to add on software. I have only been recently using Firefox and got messages from update several times.

  Firefox 16.0.2 contains a security fix that is described on this page: https://www.mozilla.org/security/know.../firefox.html. I don't know if he has something urgent for everyone or relatively rare.

  Modules (plugins and extensions) are often updated as well. Some of them, such as updates to Adobe Flash, are updates of important security, while others might be adding new features. It is very difficult to generalize... If in doubt, you can always manually check for updates.

  • Extensions: orange Firefox button or classic menu Tools > Modules > "Gear" menu > check for updates
  • Plugins: https://www.mozilla.org/plugincheck/