Want to 4500: 4500 duplexing printer

Similar Questions

• Want to 4500 HP printer all in one

  My printer used to digitize documents, no problem. I have the printer up to be wireless.   Now it is scanning a part only, as the logo or the document in several portions.  I uninstalled the software and reinstalled.  I've updated the software from the HP website.  So say the document scan settings makes.  It prints and copies fine, just have problems with the scan.

  Hi @yoritz,

  Welcome to the HP Forums!

  I'm sorry to hear you're having problems with your HP Envy 4500 scanning, but I'm happy to help you!

  Please have a look through this general guide to scanning, a "connection error" or "computer not found" Message displays when scanning of HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage 3540 e-all-in-One Printer Series. As I think that there are solutions that may solve your problem.

  If you still need help, please answer with the operating system that you use. If you do not know the operating system you are using, please visit this site. Whatsmyos.

  Thanks for posting and have a wonderful day!

• WANT 4500 general printing problem

  My desire to 4500 guard folding paper while printing, almost every page comes out with two brands creased on the top edge of the document.  It corresponds to two small white rollers inside the printer.  More or less, a person on ten pages comes out OK. Very often, the paper hangs completely and I have to open the printer to get out. In addition, it seems that the printer takes paper only when the tray is fully or nearly fully charged. I don't see what I'm doing wrong. I am quite satisfied with his printer!

  Hi Kipepeo,

  Welcome to the HP Support forums.  I see that when you print using your printer 4500 want that paper when you print the creases.

  "I have included the document that a Message appears on the control panel and the all-in-one ' Out of paper ' captures no paperproblems.  Please follow the steps described in this document.  It has a section that will guide you through how to check and clean the paper feed rollers.

• WANT TO 4500 DOES NOT PRINT ALL OF THE GRID

  WANT TO 4500 ALL IN ONE PRNTER DOES NOT PRINT ALL OF THE GRID

  My problem seems to have resolved itself.

  Thanks for responding.

• OfficeJet 4500 G510n-z: duplex printing does not

  It works with word, but not with PDF pages.  It prints and when I press the button to continue printing allowduplex printing - nothing. I used Dr. print and it says working properly, but it's not.

  Hello @cash2,

  This is a great place to visit for a community support and HP! I see that you have questions of duplex printing PDF documents. But you can duplex by using Microsoft Word. I wish I could help you.

  Please try the steps outlined in this document to see if it will help: Print PDF as an image.

  I have also provided a document for duplex printing: printing on both sides of the paper.

  If the issue is resolved, your welcome to show your appreciation by clicking on "Accept as Solution" and the "Thumbs Up". Let me know how make you out. Thank you.

• HP Envy 4500 cannot print

  I get an error message "printer error state" when I try to print from the web.  How can I fix error?

  Hello 0714Curt.

  I see that you are not able to print from the Internet and you get an error message "printer error state."

  There could be several reasons why does not the Internet, including network and connectivity problems of browser unsupported print. I will need a little more information to help you to the right information.

  1. How your printer is connected to your network (with no wireless or Ethernet)?
  2. What browser are you printing from?
  3. What is the operating system of the computer you are printing since?
  4. Are you experiencing other problems not related to this printing?
  5. Have you recently updated in or upgrade your operating system, firmware or network connections? If so, what improvements/updates run you?

  Here is a link to the support page for your printer for further referencing.

  Want to 4500 Support

  I look forward to hearing from you soon.

  -Chauntain

• 4500 wireless printer shells print screen retouching

  07/03/2011.  My printer wireless HP 4500 shells edited print screen files.  I use print screen key to copy an image of Web site or others.  I'm going to Microsoft Word.  I then paste the copy on the page of Microsoft Word.  I open the image 'toolbar' by right clicking on the upper right top blue line white area toolbar page Microsoft Word just below the horizontal and then check on the picture.  The symbol #, I change the graphic on the screen.  I cut 2 inches up and down 3 inches I don't don't need or want.  Can I activate print (one copy) and it prints instead the bottom half of the original graphics pasted.  He hits, what is on the screen that I have edited.  I've found that I can first paste the copy print screen in Irfanview, edit it register as a graphic file and which insert on the page of Microsoft Word.  The printer then prints what I edited in Irfanview.  I tried to save the Microsoft Word file asnd close it and then try to print but the printer again made the same typo.  Thank you for your help and suggestions.  C Yopst. Chicago suburbs

  09/03/2011. Wednesday.  Thank you for your help.  I went into Hewlwtt Packrad downloads for wireless Officejet 4500 G510n-z printer and downloaded and installed an updated complete driver OJ4500vG510n - z_Full_13_en.exe.  That solved the problem.  C Yopst

• How to print from iPhone / iPad for Officejet 4500 Wireless printer?

  I would like to print from my iPhone / iPad on my Officejet 4500 Wireless printer.  Y at - it an iTunes app I need to download?  My printer works fine print wirelessly from my desktop, just do not know how to print from my iPhone / iPad.  From what I read, it seems that this printer is not enabled for Airprint.

  Hello

  You can print from iOS using HP ePrint home & Biz.

  You can find more details below:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• HP Envy 4500: Cannot print with the new Wifi

  I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

  Welcome to the HP community @Dmk3,

  I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

  Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

  Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• HP Officejet 4500 G510n: Printing of documents

  Am tring to print blank tax forms, the line to stop before the print document. For example, there are 35 questions to shape the tax - my printer stop printing after no. 22 or n ° 24.  How can I get printer to print complete pages?

  Hi @dr1600and welcome to the HP Support Forums, I'd be happy to help you.

  I see you are trying to print tax forms and your Officejet 4500 stops printing after what looks like at about 3/4 of the form. Are you able to print everything from start to finish, this form is the only thing that does not print in its entirety?

  What program you print the tax go? What is a PDF? Otherwise, you can try to print in PDF format, and if it's already a PDF file, you can try print as an image? The links below can help:

  Print the PDF as an image

  You can also try to convert a PDF to Word file

  Please click accept as Solution if one of the recommendations I offered solves the problem. If you need help let me know and I'll continue to do everything I can to help.

  Thank you.

• HP 4500 wireless printer: printer all-in-one cannot scan glass

  My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

  New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

  I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

  My system is Windows 7 64 bit.

  Please answer.

  Hello @rudetom,

  I would like to see if I can help you get your Officejet 4500 Wireless software working again.

  Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

  If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Envy 4500: Repeat Printing Documents

  Hi all

  I have recently, in the last six months, plug a HP Envy 4500 series all-in-one printer as a gift for my parents. Apparently, he has a problem where it printed a document several times (despite asking only one copy) and will continue to print it whenever the printer is on.

  On my advice, my parents followed the instructions of RESUMES provided here , but it made no difference to the problem. My hunch would be to reset the printer, but of course the menu aboard is unvailable while it's printing. Someone has any advice on what to do to solve the problem?

  Many thanks in advance,

  D.

  Hi @Darius89,

  Welcome to the HP Forums!

  I see that your HP Envy 4500 continually prints an earlier document that was printed. I'm happy to discuss this issue for you!

  Just to clarify, if you leave off the computer and turn on the printer, the printer still print the same document?

  Is this document something that has been printed from the computer? Or is it an alignment page perhaps?

  In the meantime, please try a hard reset by following the instructions contained in this message, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Hope to hear from you soon and thank you for posting!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• The Officejet 4500 wireless printer can work wireless with a Wireless N Router?

  My Officejet 4500 Wireless printer worked fine with my router wireless of the B of aging, but when the latter died, I replaced it with a Wireless N router, the 4500 is possible to work with the N Wireless neworking Protocol?  Thanks for your help.

  Hello, you printer HP Officejet 4500 Wireless all-in-One Printer - G510n cannot work in the band ONLY, but your new router can be configured to accept the 802. 11b / g wireless protocols and be able to continue to use your printer. Just check the manual of your new router to enable this feature, it is easy and does not affect the performance of your wireless network.

• ENVY 4500: My printer ENVY 4500 guard disconnection (no WiFi)

  My ENVY 4500 guard printer disconnect sporatically. One minute I can print correctly, either the printer could not be reached. The printer status "the printer is not connected.

  This continues to be of all devices, not only my iMAC. I tried my laptop, my iPad, iPhone. Same story. When it fires, he died for all devices. I tried to reinstall the printer, tried to restart, unplug. Nothing seems to fix.

  If I print the report directly from the printer during this time, it says everything is connected and no problems found (see attached image).

  Then after awhile, like an hour or two later, all of a sudden the printer will spit on all the prints that were in the queue.

  I contacted support and they connected to the printer and reset some settings, and it started working, then a week later he did it again. She continues to do maybe once a week or more.

  I don't know what to do more. Anyone have any ideas?

  

  Hi @valiik,

  I wonder, have you tried to set a static IP address? Your HP printer static IP address assignment

  Please let me know.

• HP Officejet 4500 wireless printer does not appear on the control panel

  My HP Officejet 4500 wireless printer does not appear on the control panel.  How to fix it.  I have a laptop Toshiba and Windows 7 Home Premium OS.  Help, please.    rwillm

  Hey,.

  Thanks for the update, rwillm.  It seems that the installation of the printer can be a little messed up.  If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.

  • Make sure that the printer is deleted from the file devices and printers
  • Click on one of the remaining printers folder
  • Select the properties of the print server at the top of the window
  • Click the tab drivers
  • Remove all drivers in this window for the Officejet 4500

  Also check in the Device Manager to verify that there is no mention of remaining of the 4500.

  • Click on the start menu
  • Right click on computer
  • Select manage in the list
  • Click Device Manager in the list of questions on the left side of the window that opens
  • Click the view at the top of the menu, and then select Show hidden devices
  • Remove all references to the 4500 in the list of devices

  After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.

  * Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.

  If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.

  • Click on the Start Menu
  • Click on all programs
  • Open the HP folder
  • Open the folder for the series of the Officejet 4500 G510
  • Select Add a device option

  Let me know how it goes,

  Jason