want to show Please wait screen

Similar Questions

• U430 "Please wait" screen blocking the use AFTER connection

  I bought a U430 ideapad 3 days ago. Configure the laptop without problem. At ran Windows Update and updates 8.1 with 40 + updates. Everything was fine - until I turned off and restarted later.
  The Lenovo loading screen was followed by windows user login. Password entered for the user and the normal desktop appeared. Immediately a green window appeared almost fill the screen with "Please wait" in the Center and 'Cancel' at the bottom on the right.
  Cancel does nothing and the screen please wait will never - locking effectively the machine.
  The screen can not be resized, or closed, and the office is visible at the top and bottom, but cannot be selected.
  Pressing Ctrl-Alt-del and selecting the Manager tasks is not identify which charged for causing the problem and try to move applications shows the Office Manager and the task but cannot be selected, like the screen green fair overlays everything.
  I read messages online and has done a factory reset, turned off the facial recognition software and repeated the update of Windows. Everything seemed fine, but the next Green - please wait - screen returned.
  The only way I found to regain access is to run the battery down to<10%. getting="" a="" low="" battery="" warning="" at="" start="" up="" appears="" to="" stop="" the="" green="" -="" please="" wait="" -="" screen="" loading="" and="" allows="" normal="" access="" to="" the="" windows="">
  The laptop runs normally until it is turned off and then restarted and returns the screen please wait.
  Any help/suggestions appreciated.
  I have

  I was very close to retune the laptop today, but found this solution online...
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-hangs-on-please-w...

  It seems that the culprit is restoreoptin.exe

  I let the battery down for<10% to="" gain="" access.="" then="" set="" up="" another="" admin="" user="">
  I could then follow instructions on the link above.

• Please wait screen

  A computer of mine stays on the screen "Please wait" after a reboot. But even the save mode does not start. This means that I can't watch in the eventvwr or changing the msconfig. I started the computer with F8 for a restoration of the system, and even when I use a restore point of serveral day back it still hangs on the waiting screen please.

  W_Q

  Well, if you can't really get anywhere you have to do a clean install. But in SafeMode if you access the system restore you may not be in the boot. In the safe, you should try the "FUCTION KEY THEN + R WINDOWS" it should ask you 'RUN' maybe you can try to run the system restore, or try to create a new profile.

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• PC stuck on Please wait screen

  As the title explains, the PC we use guard stuck on the waiting screen please until you can use CTRL + ALT + DELETE.

  It's windows 7 Pro and for the pc to connect the network cable must be disconnected until completely connected. I tried to disable Windows Error Reporting, location Network Service, service list of networks, but with no joy.

  Any ideas would be great.

  Hi Disconsulting,
   
    
  1. What is the exact error message?
  2. Since when are you facing this problem?
  3. any recent changes on your computer with a software/hardware leads to this question?

  Step 1:

  I suggest you to check the problem in safe mode, do visit this link provided below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If the problem does not happen, then I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
     
  Step 2:

  I recommend you to check the update drivers especially drivers network card on your computer. If the drivers are not up-to-date, then, try to update the drivers.

  Reference:
    

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Graph showing "Please wait" during the long March of the process

  I have an Apex process that takes about 30 seconds to run. Is it possible to show a kind of 'Please wait' graphic on the page to inform the user that something is happening?
  
  I guess some Javascript will be needed. Or is there a way to do it using pure Apex?

  Hello

  Take a look at this thread Re: having a dialog box showing when the page is submitted.

  Concerning

  Paul

• Problems after installation with XP Service Pack 3 (screen please wait too long)

  After the automatic updates is ready to install and upgrade to SP3 of XP SP2, I have selected only quick installation and the installation progress. For a few minutes, everything seemed perfect, and I could see "Validating license... blah blah components loading... create restore point etc..". And after that, I was responsible for "System restart" I did. And then, the system displays a black screen of "Windows XP" showing "Please wait...". "and the screen is left as it is around 6-7 hours and the 256 Kbps, the internet was still on. After that, I wake up, find the same on the screen and close by the computer strength.

  After the reboot, I've seen the system configuration of Windows XP Professional SP2 to SP3. And one of my theme request then said that "he delivered a fall has resorted to previous settings.

  So, is my Windows corrupted, or incomplete installation? How will I know that the installation is successful? Please guide.

  Thank you

  Hi xploreaj,

  I noticed that often happens when a system has something like Norton or McAfee installed and that it has not been disabled prior to installation of the SP3.  If you encounter any other problems, then it is reasonable to assume that everything is ok.  However, you can also scan your system with Malwarebytes to see if there is no infections present which your current AV software has not picked up on. (how to use Malwarebytes: http://www.bleepingcomputer.com/virus-removal/how-to-use-malwarebytes-anti-malware-tutorial).

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• PLEASE WAIT, BLUE SCREEN, Windows once connected on the new Inspiron 7537 8.1

  Hi, this is my head. I have a new (less a week old) 15 inch 7000 series laptop PC with Windows 8.1 pre-installed by Dell UK.

  A day after use, I start getting a blue screen that just overlap the start screen (and everything what I am trying to access) saying 'Please wait '. I found on-line means to solve the problem with the option than a job or go back to a restore point. For the last 3 days, I had to perform system restores and especially don't want to continue to do every day.

  Notice all the I changed is to install Chrome.

  I use this site http://www.optimizewindows8.net/2014/01/fixing-please-wait-screen-problem-in-windows-8-8-1/ but it seems that this problem is very popular and there is no solution yet.

  Results

  • Method 4: perform a system restore: The only method that works so far goes back to a restore point.
  • Method 1: launch Safe Mode and perform a clean boot n ' not work, same error after reset. So don't go to investigate the item as they were all off the coast.
  • Method 2: fix the filesystem with CFS scan - I have to do this, you do not have media.
  • Method 3: log in using another account - Not tried but as I only have one account. Plus a lot of people is reporting that they must exercise in using this method with taskkill restoreoptin.exe
  • Method 5: stop waiting for updates: When I got my laptop it turned slowly making me think that something has not been installed correctly.
  • Method 6: end task restoreoptin.exe: You need another account to do this. Trying to restoreOptIn.exe /Ramp, I found that it created the screen 'Please wait '.

  I disabled the Sky drive sync'ing as many messages talking about problems of integration with the operating system.

  Before I do the kickoff at the Dell support by phone, does any body knows more about this?

  Go looking around I found that in the "app My Dell' under 'story checkup\System' a critical error the day I received the laptop. I want to completely reinstall my system but I do not have the media, have no idea where to find my windows key. I found something on "download software factory" on the Dell site, but it did not work. What are you supposed to do here.

  Hi Chris.  I don't have any real help to you that I'm sorry to say, but I also encounter the same problem with my new laptop Inspiron 7000.  I tried method 2 and he obtained throughout the analysis of the Sfc at the end without requiring the installation media and get the message: "Windows Resource Protection is not any violation of the integrity.", which was a dead-end too.

  Takes me back 20 years for Windows 2 and all conflicts of dark material that allows us to get then. Windows 8 rhyme with mistake as far as I'm concerned.

• Stuck on the screen "Please wait" or "Configuring windows. Do not turn off your computer.

  I'm under 64-bit Windows 8

  Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.

  I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.

  So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?

  I think to delete AVAST or turn it off somehow.

  Please help me.

  Problem solved

  I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".

  After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... »
  So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.

  Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.

  My deep gratitude to those who helped me. Thank you!

• Pavilion x 2 stuck on Please wait

  Hi a friend asked me to look there for laptop computer, when you start it it shows the HP symbol then moves a blue screen and then the wait please rises, I guess that's where windows is supposed to load but its there just with points going in circles, I've never used windows 8 or one of these things , so I'm a little out of my depth, I tried to reset the bios back to default values and I run a diognostics check and it came to pass that no problem so I guess it must be a software, its been like this since just after she bought. Why she did not return it so I don't know all I know, is that she tried to put the itunes on it, but he said there was not enough memory space or that she could not remember who he was as it was some time ago.

  Any help with this would be welcome

  Hello ramasesuk, welcome to the Forums of HP.

  I see that you are working on your laptop the friends, that it does not load in Windows properly, you get to a 'please wait screen. I will try to help you with this.

  At the start, have you tried to enter Safe Mode? If so, could you. If this isn't the case, I suggest to start with this.

  If you can get in Mode without failure, you can try a Refresh in Windows 8.

  If you can't mode without failure, it may indicate a bad image of the operating system. For this, you will need perform a system recovery. If your friend isn't a recovery media, she may need to contact the support for this.

  This document will guide you through the recovery process: view together to recover the operating system or reinstall the operating system. Read everything and use sub documents it leads you too.

  In case you need to contact support, the information here:
  Technical support of HP, 1-800-474-6836 in North America. For all other regions, please click here.
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html
  Please let me know how it goes.
  Thanks for posting on the HP Forums.

• I start up it will show Windows Vista family premium down then in the middle of the screen will see the Please wait

  I have an Aspire X 3200 desktop PC. And I also have Windows Vista Home premium. When I boot it it will show that Windows Vista family premium down then in the middle of the screen will show it please wait... but it won't load at all. It will do nothing and just freeze like that all the time. Like now, I have to use my laptop able to do anything. I hope I can get help because I would like to use my desktop instead of laptop.

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Step 1:

  Start in safe mode and check if the problem persists there.

  How to start Windows vista in safe mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, and then put the computer in a clean boot state and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135 Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Startup Repair tool and check if it helps.

  Startup Repair: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 3:

  If method 1 and method 2 has not helped, then perform the system restore from the recovery system to a restore point option when the computer was working fine.

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope the information is useful.

• Windows pop up on my screen that says "Please Wait".

  Original title: pop-up windows

  I continually have the 2 inch Windows pop up on my screen that says "Please Wait".  All color sheets and everything stops until it emerges.  What is this and how do I get rid of him?

  Hello

  ·         Do you use the computer laptop or desktop?

  ·         When exactly do you get this message pop up?

  ·         Were there recent changes made on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you to update the latest drivers for the graphics card on the computer and check if it helps:

  How to manage devices in Windows XP

  Method 2:

  This article is intended to help you use the resolution of the issues of video display that is included in Windows XP Help and Support Center. This article also provides a list of online support services that may help you solve your problem.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Connect your computer monitor to a spare computer and see if the error 'Please Wait' always appears. If so, it's a problem with the monitor.

• HP 15 Notebook PC L3Q92EA #ABU: HP Pavilion, 8.1 Win "Please wait" when the unlock screen saver

  Just bought an HP 15 Win8.1 running laptop.  I think it's a huge pain to use.  Once the screen lock is committed, it takes forever to get the login screen to appear.

  I move the mouse or press a key to get the screen to go back, but I see is the screen "Please wait" for more than a minute then a background appears.  Click the mouse and I have one more minute of "Please wait" before the logon screen appears.

  Can anyone help, until the laptop goes through the window?

  Hello

  Thanks for posting your concern on the Forums for Support and sorry about the problem you are having. I went through your post and it sounds like I should be able to help with the problem.

  I suggest you perform the test (Test of the HARD disk) on the computer. Follow the steps below-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F2 - System Diagnostics.
  • HDD test would be under the Test component. (usually, it is recommended to test rapid and wide, but for now because the PC is new I rather suggest you simply run the Quick Test).
  • After you choose the Quick Test, click on run once.

  If he succeeds, you can proceed with the recovery, part if she fails to give a call to tech support at the number mentioned below, since the unit is under warranty, you should be able to get help to get the drive replaced.

  On the recovery procedure, its complete restoration of unit settings factory which means that the data on the computer is cleared and with it, the software that can be installed on it. Please follow the steps below to perform recovery-

  • Switch off the appliance.
  • To turn back press the power button and as soon as you release, keep pressing the "ESC" key, unless a screen comes up, you might want to wait a minute while tapping the button.
  • In the start menu, choose F11 - system recovery.
  • On the next page of options, you can choose - "troubleshooting." (If it is a unit of windows 8, or you can skip this step)
  • On the next page, you will need to choose "Recovery Manager". (If it is a unit of windows 8, or you can skip this step)
  • On the next page in the first column, under "I need help immediately", you must choose "Reduced Image Recovery"
    • Now, here, you can get an option to backup your files, because it would be an option to say - recover after saving files or recover without backup of data.
    • You will need to insert the disc followed the screen - instructions here on and unit should be returned to its original state.

  Now if you need help email us back or call HP SUPPORT @ 1-800-474-6836 [24/7 SUPPORT].

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Startup problem: first black-wallpaper appears with the logo, and then the screen goes to the Microsoft screen with green moving bar "Please wait".

  My computer is having problems loading the main office. I start it up, the first black-wallpaper with the logo is displayed, then the screen goes to the Microsoft screen with the green bar of movement. After that, the Windows logo appears and makes the sound. A new screen will appear with a "start-up Fund" and he said: "Please wait...". "This form of lasting about 5 to 8 minutes, then the text disappears, with only the bottom upward. I left it sitting there on the blank screen for about 20 minutes, and still nothing changes. I tried Ctrl + Alt + Delete, and shows nothing. Finally restart manually, but the same problem occurs. The only way that this works is in Mode safe mode with networking (which is currently used). I also tried the system restore, but this does not work because by default it must go through the same problematic steps, as mentioned previously.

  Hi ninja_panda13,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to boot mode safe mode with networking, put your computer in a clean boot state in order to verify if any third-party application is causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to show the loading (wait screen) with animated image dialog between the screens

  Hello

  Can anyone show how to insert the load between two screens dialog, while the second screen is taken

  loading time?

  I tried the examples given in the forum but no luck

  There is an update about it here:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-quot-Please-wait-quot-screen-part-1/t...

  Note comment added to the article as well - this is a useful Variant.

• BlackBerry Smartphones Starting Error: my BB shows a white screen with 3 lines of text. Help me please.

  Hello guys,.

  I bought a Blackberry "BOLD" from a few months ago and I've been to update facilities when my laptop turns off accidentally. Since then, when I turn on my blackberry, it does not show the normal screen. It shows a white screen with the following text:

  BlackBerry 4.0.0.183, platform Options, Registered Messages. and when I click on Options, I get this error message

  Error starting net net_rim_bb_options_app:Module 'net_rim_bb_spellcheck' not found.

  What should I do? I really need my phone back. :-( Help, please! Thank you for your suggestion.

  I tried: pull battery, uninstall the Desktop Manager and the soft reset and it still does not work. :'-(

  Sandy.

  Ahhh... particular case then. What you need to do is to get the operating system that you want to:

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  And then use the JL_Cmdr utility to destroy what is on your device:

  http://forums.CrackBerry.com/F3/how-wipe-JL_Cmder-53502/

  And then you should be able to reinstall your operating system.

  Good luck... and this can be very difficult... Be very patient with you as well as your devices...