Wasting time on windows server 2012 R2

Similar Questions

• Windows Server 2012 R2 Request Time Out

  I installed Oracle Linux 7 use of Hyper-V on Windows Server 2012 R2. When I connect the Oracle Linux for internet (parameters--> network--> then set the device to run the internet), Oracle Linux takes the entire internet server and also indicates "Request Time Out" while that ping using command line on Windows server.

  Is it possible that I can fix this or can anyone help me solve this problem? Very Important and Urgent. Please help me.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Put into service Windows Server 2012 R2 takes a long time

  I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work CustomizeOS stage. What could be the problem? I have not found the newspaper to find out where she is spending time. Can you help me solve this problem?

  I could solve this problem. There is a new Agent for Windows Server 2012 R2 guest. See VCAC 6.0.1 agent 2012 comments stuck Windows

• Supported Windows Server 2012 r2-dual monitor

  Hi all

  I'm trying to become more proficient with Windows Server OS.  I installed Windows Server 2012 r2 on an older laptop (HP ProBook 6565-b) of the mine because the base OS (not remote communication in).  I'm wanting to add a second monitor to this machine, for either extending display, or simply duplicate, if I close the lid-if I can use my screen a lot nicer, bigger than what is connected to the laptop.

  I read through all the posts on double monitor support for Windows server, but have had no luck so far with suggestions that I have ad (updated & reinstall the drivers, etc..).  I also had a cheap USB to VGA external video card (Startech.com) I tried to use... no luck.  Before I installed Windows Server 2012, I got this working environment in Windows 7 and 10 on this laptop, so I think the graphics card is supported?  I wonder if this is even possible or if I'm wasting my time?

  Any idea on how I can make this work would be greatly appreciated.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• ProBook 6560 b: wireless network drivers - R2 Windows Server 2012

  Would like to know if one got successfully installed Windows server 2012 R2 drivers. I try to install the drivers wireless for two days now and could not get their work. Any help would be really appreciated.

  Thank you

  Hello:

  I don't work for or represent HP.

  All I can advise is that HP offers no support or drivers for all windows server operating systems for any mobile business or consumer they ever made.

  With this track record, I doubt very much they will be.

  In addition, it would be Intel to release Windows Server drivers for their wireless cards, not HP.

  I've never seen a card driver wireless for windows server on the Intel Web site.

  Normally the equivalent standard windows drivers work on Windows server most of the time.

  For example: If you had installed Windows Server 2008 R2 on your laptop, wireless Intel W7 driver probably would work.

  But since there is no equivalent W10 driver for the wireless card model that your laptop is, I have a feeling that is the reason why the wireless card does not work.

  You may laugh with some of the advanced settings for the card under the Advanced tab in Device Manager to see if you can get the card to work.

  Enable WMM for example.

• Windows server 2012 default behavior services

  Hi all

  I recently installed Windows server 2012 R2 on my PC and found that the Windows update service "wuauserv" starts and stops automatically after a certain time. I think the same happens for Windows 8 and 10 more. The startup type indicates that automatic (early release). Through various articles and forums, I realized that this is the default behavior, introduced in Windows where inactive services will stop automatically and works only when triggered by certain policies.

  I want to change this default behavior and want Windows update services to be able to run always. Could you please tell how to make these changes.

  Kind regards

  ADI

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Graphic driver Intel HD in Windows Server 2012

  Hey guys, I downloaded Windows Server 2012 through Dreamspark yesterday and installed on my desktop. But the system cannot identify the Intel HD graphics 2000.When I try to install the official driver for Windows 8 to Intel. An error window came out and said that "the system does not reach the installation requirements.

  Could someone help on this problem, please? I expect Windows Server 2012 for a long time and this problem has made things stuck. I can't use my HD display at a very low resolution.

  Thank you.

  Uninsured, I don't know exactly what a thing make you laugh. No matter you believe it or not, it's here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&lang=eng

  As I already said, what I find funny is the fact that some people like to say things like: "they have been waiting for Windows Server 2012 for a long time..." As it was the most important thing in the world, and as they wait for so long - it is a situation of fire for volunteers drill, they ask to.  It is the exaggeration of the issue that I find humorous.  Always, always will exist.  People think if they fall a few names, to mention a few things that make this situation 'important' for them - others will be more willing to help.  Often, this is the case - the human nature.

  Back to the part that mattered...

  "This software package will install the driver for the Intel® WHQL Intel HD Graphics 3000/2000 and® HD Graphics 4000/2500 for Windows 8 * Release Preview."

  Intel has drivers on Windows Server 2012 for other devices, but obviously not for the one you look at.  Just because they have one for Windows 8 does not mean it will work in 2012 Windows.

  Your problem is with Intel and what drivers they offer, not Microsoft (as I said already.)

  The drivers that you linked are for the Preview Release (foot) of Windows 8.

  If I were you, I would try all the drivers Windows Server 2008/2008 R2 for the product in question.  Although my quick research shows that none occurred for this chipset (probably because Windows Server is not a market that intel pushes for this chipset)-Yes, then I suggest to try the driver for Windows 7.  Using a Windows driver 8 beta is obviously NOT to give you the desired results.

  Try the Forums from Intel.

• Updates Windows Server 2012 faulty - stuck at 67%

  For the past 3 months my server 2012 no R2 VM was the fault of updates. If this is an update to Windows Server 2012, it fails. It is not related to an update of the server 2012 specific windows, but they all fail. I can run updates updates/Silverlight IE without any problem.  After that I installed them and restart it gets stuck on configures updates 67% then eventually restarts and returns and sometimes it does not many times. This is getting extremely frustrating.   -Thanks for any help

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Blue screen of death (0x0000003b) on Windows server 2012.

  Hello! I found a problem with windows server 2012. This server runs on a VMware virtual machine, and once of the month I get this error, but the drivers can cause this error all the time different.

  For the first time this problem caused the driver AgileVpn.sys, second and third time win32k.sys. And the last pilot time named videoprt.sys caused this problem.

  I spent a lot of time to search for a patch. But I have not found a necessary updates in Windows server 2012 r1 for this problem.

  Maybe give me a little help or tell me what I need to do?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Windows server 2012 file server slow speed

  Dear all,

  I use Windows server 2012 as a server file only with 64 GB RAM and 16-core intel Xeon and size of shared file is only 800 GB. problem is that after a few rate of file transfer from client to server got time slowing down as below.

  copy data between client to server transfer rate are ok (60 MB/s)

  copy data between transfer of client server are low (200 Kb/s)

  whenever I rebooted the file server, it worked super fast, but after a few hours I get this question with transfer rate.

  can someone help me with this regard.

  Noor Uz Zaman

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 r2 backup

  Hello

  I have a Windows server 2012 r2 and I m using the Windows backup to do the backup of 10 TB, I perform incremental backups, but I have a problem, any windows decides to perform a full backup of random times, he needs 60 hours to do a full backup for this reason, it is a serious problem for my.

  I need to know how to disable this full backup to chance.

  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012 lost connectivity

  Hi all

  I created 6 virtual servers Windows Server 2012 R2 Standard. However, there are 2 weeks 3 to 6 servers randomly lost connectivity (ping returned request) outdated, unable to control remotely,... several times until I have restart servers, connectivity was back. Even if 3 other servers do not have this problem.

  I found the following error events in the event viewer, I don't know if they cause this problem or not:

  Log name: System
  Source: Schannel
  Event ID: 36888
  A fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is 252.

  Reference: https://msdn.microsoft.com/en-us/library/windows/desktop/ms678421(v=vs.85).aspx

  -------------

  Log name: System

  Source: NETLOGON

  Event ID: 5719

  This computer was not able to set up a session securely with a domain controller in the domain GHPFE because of the following:

  Currently, there are no available connection server to process the logon request.

  This can lead to authentication issues. Make sure that this computer is connected to the network. If the problem persists, contact your domain administrator.

  MORE INFO

  If this computer is a domain controller for the specified domain, it puts up the session for the specified domain PDC emulator. Otherwise, this computer sets up the session secure at any domain controller for the specified domain.

  Reference: https://support.microsoft.com/en-us/kb/938449

  Microsoft warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  -------------

  Log name: Application

  Source: CAPI2

  Event ID: 4107

  Has not taken from the root list third-party auto update cab at: http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: these data are incorrect.

  Reference: https://support.microsoft.com/en-us/kb/2328240

  -------------

  Log name: System

  Source: Client DNS events

  Event ID: 8015

  The system cannot save the host (A or AAAA) resource records (RR) for the network adapter

  Reference: http://support.simpledns.com/kb/a182/system-failed-to-register-host-resource-records-rrs-network-adapter___-warning-windows-event-log.aspx

  -------------

  Log name: System

  Source: Group policy

  Event ID: 1054

  The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Check your service provider Internet (DNS, Domain Name System) is configured and working properly.

  Reference: https://support.microsoft.com/en-us/kb/324174

  Microsoft Cause: This problem may occur if the address of a preferred DNS server configured on the client is invalid or is inaccessible.

  -------------

  Is there anyone know of this problem and the resolution to it? Help, please.

  Thank you

  Khiet Manh

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Shared drive file Windows Server 2012 r2 access VERY slow

  Every time I open a file that is located in a shared folder on a drive with r2 Windows Server 2012 (videos and PDF with graphics, in particular), says file takes forever to load, videos often stutter, etc.. This affects all computers connected to the field with access to these shared folders/drive. Is there any solution for this? I couldn't find one so far.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home