Blue screen of death (0x0000003b) on Windows server 2012.

Similar Questions

• Blue screen when you log in windows server 2008 r2

  When you connect in windows server 2008 r2, all I have is a blue screen and the mouse.

  I tried to search for solutions on the internet, then I found a microsoft patch "http://support.microsoft.com/kb/2590550" I have run the fix command line but he gave me nothing, no error or success messages.

  I tried to restart but I still have the same problem.

  Is there a solution to this problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Blue screen of death after installing Windows updates that are automatically downloaded

  My computer got up until I get the blue screen whenever I try to install a Windows Update automatically downloaded.  The list of updates pending installation are KB978207, KB974470, KB971644, KB972270, KB905866, KB960362 and KB890830.  The first time that I have updated I just had the system install 7 all at the same time.  I got the blue screen and the computer may not restart normally.  Made the system restore and I tried to install each update one at a time.  7 all finished by gives me the blue screen with no reboot successfully after one of them.  I don't know what to do next.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Flashing blue/black screen on installing the VM - Windows Server 2012 RC tools

  Hello

  I have a problem with the installation of the tools from the virtual machine to a new server RC VM Workstation v8.0.2 2012 both 8.0.3: when the graphics driver is installed the machine virtual display flashes blue and black and can not be recovered.

  Reboot safe mode allows the virtual machine to start with a working screen, where to find VM tools apparently not installed. I then had success removing the VM graphics card and from the virtual machine as usual. VM tools then displays correctly installed in the virtual machine, but there is no VM card in Device Manager.

  I tried the suggestion here (http://communities.vmware.com/message/2059062#2059062) nothing works.

  Someone at - he managed a successful VM Server 2012 RC tools installation?

  See you soon,.

  Conan.

  I had this same problem when installing Server 2012 RC x 64 on my new machine simply active and virtual 3D graphics acceleration in the preferences of the VM.  This solved my problem.

• Blue Screen of death - now cannot load Windows (even in safe mode)

  Laptop last night (Satellite L500-19Z;) Win 7 64 bit) crashed while playing CIV4. Had a blue screen of death. before I had the chance to read one of the error messages about the computer restarted.

  It loaded windows in SafeMode very well then and informed me that he had loaded OK the problem safe mode will be linked to some recently installed software and I should uninstall programs I had installed until it loads normally. As it was late last night I closed and thought I would sort the morning (with the benefit of hindsight it may have been a mistake...).

  Today, when the computer tries to start, it tries a startup repair; Unfortunately it does not work every time and it says "Startup Repair tried several times but still cannot determine the cause of the problem"

  I looked at the paper it produces, but it passes all of the individual tests.

  I can't access also advanced recovery options system & support, that appears in the Startup Repair dialog box as it requires that I be connected, which apparently I am not (probably the machine never got to the windows screen connection before attempting repair system). The error message reads "you must be logged to access system recovery options. If you encounter problems to connect, please contact your computer administrator for help. Please click OK to restart the computer. »

  I had a go at the start in the advanced options (safe mode, safe mode with command etc., but the result is the same).

  I also tried the repair of your computer to the screen option options advanced boot, but after the screen where it asks you to choose the language and keyboard, I get the same error of connection mentioned above.

  Is it possible to repair or even run windows based hard drive recovery (do not have the DVD of recovery with me as I'm away from home for a few weeks) without connecting to windows? I expected here, but have not yet find a way to do it.

  (there is no disc in the disc drive, no other devices connected to the laptop - I tried with power outlet and the battery and have not noticed differences)

  Thank you
  James

  Hello

  Pitty, you cannot retrieve the HEXADECIMAL code
  On this side, I think that your HD or registry is damaged and you have to reinstall the entire system

  Good luck

  Post edited by: Praepositus

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows blue screen of death (ASF) when I play Garrysmod

  Windows blue screen of death (ASF) when I play Garrysmod

  Hey,.

  When I started to play Garrysmod (GMod) as blue screen arrives (happened 2 twice now)...

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: 101
  BCP1: 0000000000000061
  BCP2: 0000000000000000
  BCP3: FFFFF880009E7180
  BCP4: 0000000000000001
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Operating system: Windows 7

  Graphics card: Nvidia Geforce 9800 Gt

  If you want something else, ask here.

  Help, please!

  Thank you

  Christopher Kelly

  CEO Christopher Kelly - ChrisJets432 - ChrisJets Corporation - Check http://cjcw.sm4.biz/ for updates, etc.

  Right, I found the problem, the card (s) has an addon called HDR source and what is the cause of the crash.
  For example on gm_construct that I never go on the plan, due to the fact it triggers it

• Blue screen of death (stop 0x0000007B) after April Windows Update on XP Home.

  My machine (Dell Dimension 3100 with XP Home) home is set for automatic recovery of Windows updates. I reload often, but when I was forced to start again last week, I got the blue screen of death. Apart from the general BSOD error message, I got the stop code:

  STOP 0x0000007B...

  I forgot the subsequent stop codes, but search recall I was doing on them indicated drivers disk or storage-related problem.

  I ran all sorts of Dell diagnostics on my hardware, get absolutely no problem. Scan of a viral infection was also negative. A colleague help out me suggested removing the updates of Windows of April, he did help and usefulness of the ERD. XP loaded and started after that, if I had to go through a process of slooow restart for most updates. My office also now charge many times slower - I suspect drivers and services can't find what they expect to find and take considerable time to make mistakes.

  My Dell has a range of Intel (RAID-1) matrix installed. I strongly suspect that this pilot was in trouble after the April update Windows Update.

  So, what should I do to prevent this from happening again? I don't know the specific fix involved. I have disabled the automatic updates for now.

  TIA

  Rick

  Complete sweep of Kaspersky AV, booted from the CD, turned up negative, so I doubt that it is an infection.

  I'm sorry, but this does not exclude the possibility of infection. See step # 3 in my previous response, or contact Ms. PCSafety for assistance.

  Or see http://msdn.microsoft.com/en-us/library/ff559218 (VS.85) .aspx and/or http://aumha.org/a/stop.php#0x7b for more troubleshooting ideas.

  Or if you let Windows Update to install an update for the driver (never a good idea), try a roll-back of pilot.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue Screen of Death After Windows Update

  I was out of the House one night and while outside, my cell phone went through a routine Windows Update and restarted (what he did specifically I'm not aware of). Unfortunately, when I came back, I met a blue screen of death. I tried a system repair and restoration of the system, and none of them worked. I'm typing this from my wife's computer as we speak. I am very anxious, and I would like to use my laptop again. If anyone can help, please reply as soon as possible.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Blue screen of death. Windows xp family on dell e520

  I got the blue screen of death since 10/17 and have found no solution.
  I can't get into safe mode (networking, command, prompt etc.), nor any other
  f8 options option in the menu. I can't change the cache or shading where the blue screen would recommend either.
  Can anyone help

  It seems that this happened during the night with the automatic updates. my brother got up and the screen is stuck on windows stops. It was restarted by pressing the button and this screen comes up with codes such as 0 x 00000050 or 0x0000007e and other codes. nothing I've tried works. I can't get any internet access when I connect to this computer. What are my other options. my mother also lost the discs when this is supplied with the computer.

  any help will be great...

  read this http://www.asklaptopfreak.com/laptop-notebook-help/2006/06/04/blue-screen-when-start-computer/

  some good stuff there for you to try

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• Installation of Powershell 2 on Windows Vista causes Blue Screen of Death

  I tried to install Powershell 2 on my Windows Vista Home Premium (with SP2) machine. I use the Windows6 package. 0-KB968930-x 86.msu. However, in the middle of the installation, I get a blue screen of death, and the computer restarts.

  I don't know if it is a help, but the problem report displayed when the machine came back to the top is as follows:

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 1000008e

  BCP1: C0000005

  BCP2: 00000000

  BCP3: 8FB3DB9C

  BCP4: 00000000

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini073110-01.dmp

  C:\Users\Martin Lee\AppData\Local\Temp\WER-142803-0.sysdata.xml

  C:\Users\Martin Lee\AppData\Local\Temp\WER25F6.tmp.version.txt

  Hello CodeMunger,

  You can post on the Forum of Microsoft Powershell. Click here for a link to the forums.
  They may be better able to help with your questions.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.