Watlow F4 Communication cable

Similar Questions

• No com with E3648A series

  Not able to set communicate with the use of the library "age364xa is Started.vi".

  The error is shown as being attached.

  Nathan thank you very much for your answer.

  It is useful with the use of MAX.

  Is to discover that it requires the use of a null modem for serial communication cable.

• How to send the order to T402 Zebra label printer with rs232

  Hello

  I use T402 Zebra label printer, communication cable series D9.

  I want to send commands to the printer to the printer to print the date and serial number and barcode. How can I use the visa to send commands to the printer?

  May be that someone is there to help?

  Thank you

  I don't know whether or not the printer you have has a real-time clock. I suspect that it is not. Therefore, you must format the date and time string in your LabVIEW code and just include this string in the label. The printer itself is not capable of producing, tracking and assinging the serial numbers of your Instrument. Your application will need to do and just like the date format of the specific string and put it in the label. I highly recommend that you download the ZPL Manual of www.zebra.com. I would include it here, but it's too big to be included as an attachment.

• time-out error

  Hello

  I get an error of delay in my exe file but its not working in laptop but its does not work in desktop basically I m do mannully x and axis are using servo motor control first meters in mannully and I'll store data and after I'll are automatically at the time where I get error of wait time at the office. In the same office before it was working now its time-out error is. Please tell me the solution. actully I change office in this office than m... timeout error please tell me the solution.

  Thank you.

  Hi, I had the answer... I solved the problem of my problem, I have already mentioned above (in his work at the office laptop its does not work) Finally I solved the problem is (I use delta servo motor control, I was using the communication cable connection is not based) in connection only. Finally I gave the connection now its fantastic work...

  Thank you for your review of precious...

• HELP - FPGA SPARTAN 3E-100 CP132 WORKS WITH LABVIEW FPGA?

  HI EVERYONE, GET ON IM TRYING TO USE MY FPGA WITH LABVIEW, BUT I DO KNOW THAT IF ITS COMPATIBLE, I INSTALLED THE DRIVERS, MODULE FPGA AND LABVIEW 2012, IM USING WINDOWS 7 32 BIT, AND AFTER I COMPILED ITS SAYS:

  LabVIEW FPGA called another software component, and the component returned the following error:

  Error code:-310601

  NOR-COBS: Impossible to detect the communication cable.
  Check the communication cable is plugged into your computer and your target. Also, verify that the proper drivers are installed.

  Thank you.

  =)

  Hi dvaldez2.

  LabVIEW FPGA offers no support for any material to third parties, other than the 3rd Spartan XUP Starter Kit. These are probably the drivers you downloaded.

  http://digital.NI.com/express.nsf/bycode/Spartan3E?OpenDocument&lang=en&node=seminar_US

  However, this driver supports only the Starter Kit Board itself (http://www.digilentinc.com/Products/Detail.cfm?NavPath=2, 400, 790 & Prod = S3EBOARD). You may not use the driver with any other Xilinx FPGAS.

  I hope this helps.

• Controller 360 not recognized on Vista 64

  Vista 64 initially recognized the Xbox 360 controller, but from there it does not find the scope.  I also tried to download the software from the center of the suggested solutions miscrosoft.  Nothing...

  Everything I read indicates that Vista 64 should allows me to use my controller...

  Please, help :-)

  think I just find an answer: the Wireless charging cable not a communication cable... buy an adapter...

• Xbox 360 controller (wired, Plug and play) in Vista!

  I plugged the USB controller and let the drivers to install automatically, I restarted. But when I try to play, theres no response to all games. Can I activate the controller with the big Center (button as I would to turn on normally the X controller)? what I'm missing here? I even went to the control panel > game controllers and it is not listed in the menu options. Help, please!

  Okay - I use a PLug-and-PLay charger with USB socket, I read that I might not be able to use this type of cable, can anyone confirm? It DL'ed pilots tho?

  No, which won't work.  The charger is not a communication cable.  If you have a wireless controller, you need the PC wireless card for it.

• WRT320N cannot not get IP address - using only 1 - no internet access - wired port hang web configuration pages

  You just bought Linksys WRT320N as a replacement for Netgear MR814.

  Cannot connect to internet using Linksys WRT320N.

  Installation program:

  ISP: Cox Communications (cable)

  Firmware: v1.0.03 build 010 July 24, 2009

  1 Wired - port 1 - for Windows XP SP 3 Dell Desktop

  Attempts to install:

  1 tried to set up using the installation CD.  Spread the slightest error with error 302: internal error. tried this 3 times

  2A through the reset, power off, procedures.

  3 Ping 192.168.1.1 = success

  4. connected to 192.168.1.1 via web browser

  5. set the MAC Address = MAC address of the computer

  6. the MTU value = Auto (1500).  Also tried manual 1492

  Could not get the IP address by using the version of IP address and IP address renew.  Address Internet IP still = 0.0.0.0

  Note that the web page will be still stuck after perfoming some actions (such as after switching between the tabs).  Message at the bottom of the browser is "Wating for http://192.168.1.1/Status_Router.asp.  And the hourglass on the screen away.

  Note that the old Netgear router still works fine and I am currently connected to the internet via the Netgear router.   I'd appreciate any help getting the new Linksys router connection/operation/obtaining of internet and IP address.

  Thanks for your help.

  I do not know where I was unclear: you wrote before you used the function of the cloning mac address on the WRT to clone the MAC address of the PC. In this way the WRT "pretended" to be the PC if you connect to the internet port WRT to your modem.

  However, the PC is not the device you used before you connect to the internet. The PC was not the device that was connected to the modem before. If you connect the computer directly to your modem it will either be an IP address. There will be no internet.

  The problem is that your ISP only allows you to have an active internet connection single at some point. If you plug in a different device with a different MAC address to your modem this device won't get an IP address. That you have connected the Netgear router to your modem and you have internet, then you need to clone the MAC address of the Netgear router. This is the device that is connected to your internet connection and it is the MAC address that your ISP has locked your internet connection.

  So, once again: clone the MAC address of the router netgear (internet or WAN port MAC address) of your Linksys router. Then the Linksys's router Netgear and your ISP should accept the Linksys router. The netgear router should have a status page in the web interface, showing you the right MAC address to be cloned.

• How to use Windows media player with the windows Task Scheduler (7)?

  Original title: why it is so difficult... question of windows media player 12

  You want to use Windows media player with windows (7) Task Scheduler.   We have a pc, everything that appears on the screen is also pumped to our community cable channel, normally a slideshow in loop is the show, however, sometimes via a scheduler interrupt the slideshow to play a video (say a video of our last Board of Directors meeting) and to make videos, ideally the slideshow returns.

  Using Microsoft software, in this case, Windows Media Player v12.0.7601.18150, Task Scheduler 1.0, two things must happen.

  1 Task Scheduler launch a video in fullscreen / top of window.

  2. when the video is finished, wmp is closed.

  Well, 1 works fine.  The Task Manager launching wmp in full screen.  And a framework of wmp switches to allow a session of wmp be on top.

  However, a short time after launch wmp cut the screen down to a smaller version.

  And 2. closure of WMP fails to occur.  He remains on the screen waiting for human input.

  Any input appreciated.

  Charlie

  For "cuts WMP down to a smaller version", right click on the video game (during playback) and deselect ' auto Player size to contain video.

  For number 2, define your point of Task Scheduler task for the "end of task after X minutes" and therefore the value of X.  Then it will kill the instance of running Media Player after a large number of minutes.  So, it will absolutely immediately when the video is done playing, but it will be within 60 seconds and will be at least to remove WMP and let your slideshow be visible again.

• Send a message of 'OOPS' "everytime" I'm trying to download a game for MSN!

  I ' did exactly what the tech support page says, to correct the situation.

  1. disable popups blocker

  2. go to tools, set my security to medium (lowest wds 7 will)

  3. checked there are no sites in the restricted site WD/box

  4. active activex filtering is disabled

  5. verified my Norton apparently doen't have built in popups blocker, went through all the parameters not found

  6. then disabled firewall, and Norton Antivirius temporarialy

  Tried to install all the following without result;  MSN chess, ladies MSN, MSN Bankshotbilliards 8 Ball and 9 Ball

  Seems that everything what needs to be "downloaded" and installed from MSN Games does not work!

  Help, please!

  Running Windows 7 Home Premiun (64-bit) 1 Please

  HD 500 GB, 8 GB RAM processor intel dual core i3

  HP Pavilion notebook g7

  Cox communications cable high speed

  Hello

  The question you posted would be better suited in the MSN Forums; We recommend that you post your query in the MSN Forums for assistance. Go through the article that says how to contact MSN support. Here is the link for your reference.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  For any Windows questions do not hesitate to join us.

• 6500 printer all-in-one wireless

  I am a 73 year old who has learned to use a computer later than most. I know not enough for operating a computer, but I am not a technician. I bought a 6500 all in one wireless and worked with her for two weeks and could never make it work so I took it back. I love what did the printer, if only I could get it to work properly. I don't know that I'm the problem and not the mechanism.

  When I loaded the software on two computers, they would work wirless, but the bureau which has been connected to the router does not recognize the printer. After that all efforts exausted the mistake of reinstalling software would be developed. If I used the usb cable to load the software into the computer connected to the router, it would work, but the wireless would not work. Same error message. After thinking about this topic, I think I told the installer to use the usb cable in the router computer which clogged to the top of the installation wireless for the other two and the opposite for the spoiled wireless units a cable installation. I never tried plugging the eithernet cable.

  I would like to start again and see if I can feel comfortable to install. If so, I'll go and rebuy to the printer.

  My situation: I have a desktop Dell that is connected through router a BEFW 11 S 4 Linksys. My incoming signal is provided by Charter Communications cable. I have another unit of Dell desktop at home and a laptop that I want to connect wireless.

  Question: Can I connect the printer directly to the router with an eithernet cable and run the other two wireless units? I learned by a sales person (after that I came back from the printer) that if I simply connected the printer to the router thur the eithernet port it would be on my network and the Bureau recognise. Then the other two computers would connect wirelessly.

  Had no answers. Did you get any help. The printer took over and my money back. The pain is useless. Thank you very much.

• Have I not an Aurora R1?

  Hi, first time poster and only a little tech savvy Aurora owner here.

  I have an Aurora I bought in March 2010 and has an I7 960 CPU.  I still have the original packing slip, but it just says it's a "Alienware Aurora Desktop".  I found a Wikipedia article that suggests is an R1 or R1 ALX.  I tried to check with Dell, but even if I have the service tag, the person I spoke with could not help me.

  So the first question is how can we be sure what model I have?  I don't know how important this is, but I would like to know it.

  In the 5 years I've owned the Aurora, it became gradually slower and slower. I was led to believe that reinstalling the operating system can help with that.  I found this post from TESLA1856 on the subject.  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19376654 I also found this Dell Knowledge Base article: www.dell.com/.../en. s = dhs & cs = 19 & l = en

  I thought I could try firstly make a recovery instead of a clean install, but I found that my Aurora apparently has no Alien ReSpawn loaded, so I'm back to consider a clean install.

  I have not tried ID Council MIO communication cable yet.

  I'm a little intimidated by all the warnings of disastrous consequences that may befall me if I do the wrong thing or do something in the right order, but I think I can get through.

  I had not heard of Acronis and I will consider it.

  Thanks in advance for any help.

  VGD

  verygooddog

  I have an Aurora I bought in March 2010 and has an I7 960 CPU.

  He must then Aurora R1 (with Intel x 58 chipset). Model alx improved if there mobile louvers on top and additional lights.

  AlienRespawn called Dell DataSafeLocal at the time, but it is not reliable and won't bring back if the hardware is changed. Clean-install is preferable. This is in itself will be speed it up a bit (if you ever did in 3-4 years).

  Last update for this machine is probably an SSD. You want speed, you take a little longer and you are probably looking to a new installation of Windows anyway. Make the existing mill to drive a "data disc" after that you get everything out of him.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19568143

  Good SSD will machine more quickly than ever.

• Watlow F4 HS USB GPIB communication problem

  Hello

  I'm trying to communicate with the Watlow F4 controller on a room of environmental Tenney. The only available is a GPIB port. I've successfully installed the GPIB-USB-HS cable and I can see this device under devices and interfaces MAX. However, no instrument find when scanning for default settings of the interface GPIB instruments. I also downloaded the Watlow F4 VI drivers and try to run away. I got a 1073807346 error occurred at VISA opened in Watlow F4.lvlib:Initialize.vi-> up.vi set Watlow F4 system

  I use Labview 8.5.1 with 488.2, VISA, DAQmx installed.

  Please see the pictures attached for more details. Any suggestions would be greatly appreciated.

  Concerning

  FliU

  Try the VI is useless if the instrument is not detected by MAX. I suggest that refer you to the manual or the seller to see if there is something you need to do on the instrument for GPIB communication.

• I look at apple tv in illinois, with service from comcast.  but, I'm moving to arizona for 3 months and cox communications is the cable operator. I always look at my apple tv?

  I look at apple tv in illinois with comcast as my ISP.  I'll be in arizona for three months.  Arizona cable provider is cox communications.  is it possible that I can watch apple tv on a big screen tv?

  As long as you have Wifi/ethernet your OK. Regardless of the name of the current provider.

• Watlow F4D Serial Communication problem error Code-1073807339 VISA Read in Watlow F4.lvlib:Utility MODBUS RTU receive message

  Hello

  I am trying to contact a Watlow F4D controller on a room using RS232. I use a cable converter USB-series and NI Watlow F4D Serial Driver.

  The code of error-1073807339 occurs in:

  Read in F4.lvlib:Utility MODBUS RTU Watlow VISA receive message-> Watlow F4.lvlib:Utility Register.vi reading

  I don't know what caused the problem. I am able to see the cable converter USB-Serial OR max. Please see the pictures for more details

  Thank you

  Felix