Webcam from Sony does not

Similar Questions

• Receiving wireless audio/video from Sony does not connect to my iMac

  Wireless Sony AV receiver STR DN 840 does not connect to my iMac so I can play iTunes it

  Which iMac do you have?

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

• I tried to update my Adobe's Flash Player.   Flash Player from Adobe, does not open on my Macbook pro. The message said that it was not downloaded from Mac App store. The Mac app store, Adobe flash player is not listed. Help!.

  I want to update flash player on my Macbook Pro with the latest operating system.  Help!

  Flash player downloaded from Adobe does not open because there was no Mac App store.

  Help!

  Only download from Adobe

  https://get.Adobe.com/flashplayer/

  You can do going in system preferences, look for Flash Player down. Click the icon and check the update

  

  If you are upgraded you will see

  Adobe® Flash® Player is up to date on this system.

• Photos from Apple does not open

  Photos from Apple does not open on the slider.

  You can maintain the option command buttons launching Photos to run repair.

• Why do I get a message from Script does not

  Whenever I turn on my computer and go on the internet (Firefox), I get a message from script does not always.  I always click the stop script.  For up to about half an hour, the computer is very slow and sometimes does not.  After about half an hour, the computer starts more smoothly.

  The complete message, I just had was: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://divxhtml5/content/script.js:6

  I use norton 360 and Malwarebytes anti-malware to scan my computer for viruses and also auslogics disk defrag every week.  I also use Windows Vista, which he said can cause some problems.

  I spoke to a staff member of my internet provider who told me it was a simple problem to solve, but they could not advise me on how to do it.

  Thanks for any help.

  Hi johne278,

  Thanks for posting in the Microsoft Community.

  Please answer the question-

  This problem occur on Internet Explorer as well?

  Method-

  If the problem is specific to Firefox, so I'd like you to contact the Support of Mozilla Firefox and post a question the Mozilla Forums as well.

  We know if you need help. We will be happy to help you.

  Thank you.

• Sony does not recognize my email or password; How can I fix it?

  I had Sony accounts. Yet, when I try to access my account, Sony does not recognize my email address or

  my password.  How can I fix this impossible situation?

  We apologize for the inconvenience, Ken. For assistance, please contact our team of Sony store at 1-877-865-7669. Thank you!

• My "restore from backup" does not end as the screen lock appears

  I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.

  I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!

  Hello, Franklytex!

  Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:

  Try again after each step

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
  5. If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
  6. If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
  7. Contact Apple technical support.

  See you soon!

• just installed windows 8.1 but the webcam and Bluetooth does not work

  I just installed windows 8.1 on hp laptop 430 but now my webcam doesn't work and onboard microphone does not work and bluetooth does not work also. Please give me a soloution.

  Thankz in advance

  Hello Shehanf93

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• Select Sony does not work

  I have xperia mobile z2... But he did not SELECT from SONY... Why?

  @987789

  You always have, but it has been incorporated into the "what's new".

• USB 20.0 M pixels 6 LED Webcam Web Cam does not?

  Recently I bought this webcam for my laptop, 20.0 MEGA pixel 6 LED Webcam Web Cam camera computer. In fact, I bought two one for me and one for my son and have not been able to get them to function. When I plug the usb and microphone cable, it tells that the new hardware has been found and it is to install the software of the new device. It complements and says device is ready to be used, but the camera does not work. The microphone works without problem, I tried reistalling the device a couple of times and in different ways without success. I tried unisnstalling, resettlement, adding hardware, etc.
  The camera stands out in Device Manager as a camera USB 2.0 in imaging equipment and records of cable into the USB as a Composite USB.
  Does anyone have ideas to make the camera work? I would really appreciate it!
  Running Windows Vista thanks

  Thank you Robert Charney

  Hello

  If the webcam appears in Device Manager, idon't think that you will need special software for the cable.

  You could try the cam with Live Messenger.

  If it fails, you can get an error message more information.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Webcam of gateway does not!

  Hello, my front door NV57H102ubuilt in webcam stopped working one day, and I did as said gateway:

  "In the Device Manager, click on the plus sign (+) next to imaging devices.
  I did as they said, but the webcam was not found in the Device Manager. When I use VMWare Player, it does not, although it used to be.
  Help!
  Thank you!

  Hello Bob,

  Here's my guess. Gateway is 1) I forgot to plug / has a faulty connection in the internal webcam, or 2) they have a generic problem with the webcam, and the only way they have to "fix" is to replace the internal unit. I arrive at this conclusion, based on the number of posters to their site and having the same experience you have, with no "official" resolution

  In both cases, it is a hardware problem which only gateway may set, and thus why they want you to ship it to them. Considering how inexpensive even high quality Webcams are, I think you're better off with an external Webcam. As for the Mac vs. PC battle, each to their own, but as I can't afford to play with a Mac, I'll stick with my occasionally (temporarily) broken PC.

  Kind regards

  BearPup

• GoldenGirl, you said, "something outside of the limited warranty Sony does not require a charge"

  I showed you where I was covered by warranty that Sony extended for the number of optical block until 31/08/10-31/08/12...

  I also accepted the first offer from Sony 40 "Bravie.

  Now that the truth is out, why did you stop reponding to me?

  Joanne

  Mommyjosie,

  I often read this group discussion, but never felt obliged to join so far.  I watched you say the same thing again and again, providing dates and promises and show your total frustration with the way Sony has not handled your concerns.

  I also bought a KDF... He had the same problem with optical block, and my position of television has been replaced by Sony in 2012.

  I know that they have extended their warranty on this unit.  I can't believe how badly GOLDEN GIRL, (which I have lost all respect for) treats you.

  Of course, Sony officials are unaware their first offer, which accepted you it, and trying to force money out of you with a reduced supply.

  GoldenGirl, you treat, once good customer of Sony, who showed faith in Sony products and guarantees

  without the respect of a response because she corrected you.

  Personally, I would like to see mommyjosie finally get TV Sony Exchange program that she was promised 4 years ago... How much more if she must suffer for the purchase of a Sony (defective) and guarantee (Worthless)?

  It seems that you are enjoying his stress and making him go without justice!  What an abuse of power.  You are here to help the consumer to deal not with ignore - lie!

  I would like to see Justice here, so that there can be peace...   Fr. Tanner

• Fusion 8 trial goes wrong - Win8.1 VM, imported from Parallels, does not start

  I was pretty many small problems with Parallels, so I thought that I had trial VMware. After importing my Parallels VM, it does not start in Fusion. A few details:

  Fusion 8.0.1 - 3094680, downloaded today VMware.

  I installed it, accepting all the defaults. Let him import my Parallels VM work. From the first test, wouldn't start Windows. After using Windows for many years, I am familiar with its built-in startup repair functions, so I followed, as follows:

  All down took place inside the virtual machine in the virtual machine window, at the start of the first attempt.

  "Your PC came across a problem..." »

  "Automatic repair".

  "Diagnosis of your PC", which recommended that I just tried the reboot, so I did.

  "Your PC came across a problem..." »

  "Automatic repair".

  ""Diagnose your PC' this time, I chose Advanced Options > troubleshooting > Advanced Options > startup repair, which took me through "diagnose your PC", check disk for errors, ""repair disk errors. That has not helped - I found myself at the beginning: "Your PC came across a problem..." »

  I tried again the whole process and am still unable to boot: "Your PC came across a problem..." »

  Oh, my Mac is a MBP, the model of 2014, the 16 GB of RAM, a Yosemite OS X fully updated running. There are about 150 GB of SSD disk space, and the virtual machine is set to 8 GB of RAM.

  Any ideas? I'll be happy to check if suggested things and report.

  The first thing I would try would be to uninstall the drivers/additions/tools from inside the virtual machine before you import it - that is to say from inside Parallels.  Have you tried?

  Check that Parallels knows that it is a virtual machine Windows 8.1 (or the closest guest OS type he understands).  We rely on the knowledge of the OS type asked to perform various tasks during the import, and we could get confused if it is not correctly set prior to importation.  By the way, check what disk controller, we chose to use for the virtual hard disk.  SATA is probably the safest option, but I can't predict with certainty how it works if you use a type of controller of different disk for the virtual machine in Parallels.

  I hope it's useful!  Feel free to post them here if none of these solves the problem.

  See you soon,.

  --

  Darius

• Lightroom: Time to Capture for videos imported from iphoto does not appear in the metadata

  Hi, I imported all my photos and videos from iphoto to Lightroom recently with iphoto import plugin.  I think that all my photos have been imported, but I noticed that all my videos have no capture time, while they became grouped in my collections.  But I think that I can still see their capture time in the 'gray' text on each photo.  Why did this happen and how to solve this problem?  I really want my time to capture in video metadata, and I also want to see my videos in chronological order on the right with my videos.   Strangely, the videos imported into Lightroom directly from my camera SD card do not have this problem, don't do that those imported from iphoto.  Thank you!

  LR does not correctly manage video metadata in general, and in particular, he often misses capture time.  Sometimes it works: choose a video, make metadata > edit Capture time and then click all change (without actually modifying the corrected time).  If that sets the time of capture at the right time, you can select all the videos of problem, metadata > edit Capture time, and then click all change.   If you have a small number of videos, you can manually fix the capture time to help change the Capture time.

  See for more information in the official forum for feedback from Adobe for more details, vote on it and give your opinion: Lightroom: metadata applied to videos in Lightroom is not available in other applications

• Excerpt from ClickToGoToWebPage does not

  Hello

  I'm having a problem with the excerpt from ClickToGoToWebPage because it works while I'm in a preview mode, but once I have publish my file, nothing happens when I click on the button.  I tried to created a simple file to test the problem.  I chose actionscript 3.0 with flash player 11.4.  I wrote a text and then converted to a symbol with the name of the instance as: test.  I joined the go to Web page snippet with the name of the appropriate forum and it works perfectly in the preview, but not when published as a HTML file.

  I'm working on a recently purchased flash cs6 and doubt that an update would help (which I don't know how to do).  the version is 12.0.2.529.  I use windows 8.

  Here's what's in my layer actions:

  Stop()

  test.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

  }

  on an unrelated note, why can't I just write some text and then put the web address in the text box 'Link' in the text options?  I tried this, but it does not work as well.  What is the function of 'Link '?

  If someone has seen, it would be appreciated.

  Thank you

  You probably have a problem of security sandbox with your link and navigateToURL.

  Download your files on a web server and the test, or add some flash to your list of trusted files, http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l