Webcam HP 620 does not

Similar Questions

• just installed windows 8.1 but the webcam and Bluetooth does not work

  I just installed windows 8.1 on hp laptop 430 but now my webcam doesn't work and onboard microphone does not work and bluetooth does not work also. Please give me a soloution.

  Thankz in advance

  Hello Shehanf93

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• USB 20.0 M pixels 6 LED Webcam Web Cam does not?

  Recently I bought this webcam for my laptop, 20.0 MEGA pixel 6 LED Webcam Web Cam camera computer. In fact, I bought two one for me and one for my son and have not been able to get them to function. When I plug the usb and microphone cable, it tells that the new hardware has been found and it is to install the software of the new device. It complements and says device is ready to be used, but the camera does not work. The microphone works without problem, I tried reistalling the device a couple of times and in different ways without success. I tried unisnstalling, resettlement, adding hardware, etc.
  The camera stands out in Device Manager as a camera USB 2.0 in imaging equipment and records of cable into the USB as a Composite USB.
  Does anyone have ideas to make the camera work? I would really appreciate it!
  Running Windows Vista thanks

  Thank you Robert Charney

  Hello

  If the webcam appears in Device Manager, idon't think that you will need special software for the cable.

  You could try the cam with Live Messenger.

  If it fails, you can get an error message more information.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron 620 does not illuminate

  I have a 620 Inspiron, that does not illuminate.  Green light outside lights when the computer is plugged in but there is no light lit on the motherboard, or elsewhere in the Interior.

  Is it a question of power power or a motherboard problem?

  Thank you

  The YELLOW LED on the CHIP (on the motherboard) must light up when the machine is connected, and the green light on the back indicates AC power.  You have a DEAD power supply.

• Webcam of gateway does not!

  Hello, my front door NV57H102ubuilt in webcam stopped working one day, and I did as said gateway:

  "In the Device Manager, click on the plus sign (+) next to imaging devices.
  I did as they said, but the webcam was not found in the Device Manager. When I use VMWare Player, it does not, although it used to be.
  Help!
  Thank you!

  Hello Bob,

  Here's my guess. Gateway is 1) I forgot to plug / has a faulty connection in the internal webcam, or 2) they have a generic problem with the webcam, and the only way they have to "fix" is to replace the internal unit. I arrive at this conclusion, based on the number of posters to their site and having the same experience you have, with no "official" resolution

  In both cases, it is a hardware problem which only gateway may set, and thus why they want you to ship it to them. Considering how inexpensive even high quality Webcams are, I think you're better off with an external Webcam. As for the Mac vs. PC battle, each to their own, but as I can't afford to play with a Mac, I'll stick with my occasionally (temporarily) broken PC.

  Kind regards

  BearPup

• Webcam ASUS x53u does not work with Windows 7 laptop

  ASUS x53u Windows 7 built in web cam usually works in currency on the desktop but it does not load

  Hi, Tracey,

  The camera worked before?

  What changes were made to the system before it stopped working?  Add or remove new hardware or software?

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  When you are finished, press Windows flag key + R to open the run

  Type %windir%\Logs\CBS

  Press Ok

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Select Device Manager

  Click on the + next to imaging devices

  Right-click on the device and select uninstall

  Close the Device Manager

  Reboot and Windows will reinstall the driver

  Go to the manufacturer's website and search for updates

  http://in.ASUS.com/notebooks/Versatile_Performance/X53U/#specifications

  Good luck!

• Webcam and Whiteboard does not not with Adobe AIR with Adobe Flash Builder

  Hello

  I am trying to build a simple chat using Adobe Flash Builder target service for Office AIR (my final goal is to bring to android). My version of adobe AIR is 2.5.0 and here is my source code:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:WindowedApplication ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  " xmlns:mx ="library://ns.adobe.com/flex/mx"minWidth ="955"="600"xmlns:rtc = minHeight ' http://ns.Adobe.com/RTC « >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < rtc:AdobeHSAuthenticator id = "auth" userName = "Yy" protocol = "rtmfp" / >

  < / fx:Declarations >

  " < rtc:ConnectSessionContainer id = authenticator 'session' ="{auth}"roomURL ="https://collaboration.adobelivecycle.com/yytan1987/myfirstroom"width ="100% "height ="100% "> "

  < mx:HBox width = "100%" height = "100%" >

  < mx:VBox width = "25%" height = "100%" >

  < rtc:WebCamera width = "100%" height="50%"/ >

  < rtc:SimpleChat width = "100%" height="50%"/ >

  < / mx:VBox >

  < rtc:SharedWhiteBoard width = "75%" height="100%"/ >

  < / mx:HBox >

  < / rtc:ConnectSessionContainer >

  < / s:WindowedApplication >

  Essentially when it debug with air, the cat works fine, but the webcam and Whiteboard do not work... I don't really know what the problem with it is already... Grateful if someone can help, thanks!

  Concerning

  Hello

  My point is, is your self-promotion set to the room. I mean what

  your user role when a user enters in the room (which is not host), it is 10

  or 50. If its 10 i.e. spectator, while it cannot use his own cam etc. You

  need to take a look at the newspapers when a user types and if its 10 and

  you want to give these permissions, turn on self-promotion of the

  devconsole for the room to do his role 50 which is editor.

  I just now downloaded 2.5.1 AIR and created a new project with your

  source and I am capable of anything.

  Thank you

  Hironmay Basu

• VAIO Webcam (VGP-VCC6) does not not after Win7 upgrade

  My laptop was recently changed from Vista to Windows 7 Ultimate. The only problem I've had is with the stupid webcam. I downloaded all the drivers for it and the webcam appears under 'devices & Printers' as "Composite USB device", but NOT in the Device Manager. How is this possible and what I am doing wrong? Not only that, but when I go into the Device Manager list of records continues expansion and contraction on its own (as he continues to try to download information).
  I also downloaded the ArcSoft WebCam companion 2 and when open it says "a webcam was not found or is not installed properly. Camera is in use by another application or not connected. »
  How can I solve this?

  The drivers I downloaded:
  Original - Sony Visual Communication Camera VGP-VCC6 Driver
  Original - Texas Instruments PCIxx12 Integrated FlashMedia Controller
  Original - the Sony Firmware Extension parser.

  your question is the USB driver, if it is an upgrade and not a clean install, point the pilot to the folder Windows, System32, INF, the next time he's looking for a new device. If she is not there at all unfortunately the only way to reinstall the USB controller is the recovery of Original OS (format back to Vista premium), then the return upgrade to Ultimate never completely uninstall the USB drivers. uninstall the RH only and restarted, it will rebuild if you ever have problems with USB driver. never remove the controller.

• Re: Integrated webcam Satellite P300 does not: locked by another application

  Hello

  The webcam integrated on my Satellite P300-h-13 no longer works. When I try to use it I get the following message: locked by another application. The only program on my computer that uses a webcam is MSN Messenger, Skype Yes or as some programs are not the problem.

  I saw some other threads on this subject, but those ppl had another laptop. And because I don't know that much about computers that I wasn't sure if I had to do the same steps to make repair.

  Could someone help me please?

  Thanks in advance!

  Hello

  This issue is known to me because I also had, and it was solved by installing Vista SP1!

  You can resolve this follow these steps:

  Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.

  Install Service Pack 1 for Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1) or the full SP1

  Update your e-mail software (MSN/Yahoo Messenger, etc...)

  If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.

  Try closing the bar Assistant camera on the left side of the office.

  To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

  Good bye

• T560 - USB Skyris 445 m external webcam installed but does not

  I don't know what it is... but the camera refuses to work exclusively on the Lenovo T560. Yet, it works on ALL the other machines I tested (including other laptops and other machines running windows 10)

  It's the camera, what I'm trying to troubleshoot:
  http://www.Celestron.com/browse-shop/astronomy/Astroimaging-cameras/skyris-445m

  I install this camera using the driver from the manufacturer (I tried 2 of them) and it seems to install properly (in the Device Manager, everything is green AND the full name of the camera is set correctly).

  Yet, when I try to use the camera by using the software provided by the manufacturer, I get "error, not enough band width and the camera is in use by another program."

  I tested all drivers. I tried all USB ports. I tried deleting all the software that can potentially interfere with the laptop.

  Hell, I even re-installed Windows 10 FROM SCRATCH just to test it... and yet, he refuses to work so that all other machines seems to work very well with it. The kicker is that it is not the first device which refuses to the laptop.

  So, what's the problem? Why the laptop is so that all the other machines I've tested perfectly functioning problems with external USB cameras.

  I'm panicking here because I bought this laptop EXCLUSIVELY to use this device.

  It solved!

  It turns out that the update of Microsoft Windows 10 birthday broke millions of external webcams in the world. (Good job Microsoft, you owe me a good 18 hours)

  Had to go back to the previous update (which I was lucky enough to be able to do... because I received the laptop after the update has been applied).

  The previous version of Windows is fixed at all. (Windows 2015 Nov 10 to build 1511).

• Webcam HP-101 does not after that I updated the OS to windows 7 (64 bit) to windows 8 (64-bit).

  I urgently need my webcam this week for a place of encounter of the celebrity, and I'm upset.
  I tried several measures then 15 and already spent a day on same; [Content deleted]
  Here is my pc name and number-
  HP Pavilion Notebook PC g6
  LP235EA #ACB
  
  All the drivers are updated
  
  the cam is nt shown under imaging devices; He has appeared in other devices Port_ #0005.Hub_ #0004
  
  Please msg me; If anyone can help me through teamviewer; Please
  
  hard reset, running on cmd, uninstalling the driver, analysis of material changes in the imaging devices, then reinstall etc etc; I've tried everything
  
  

  I'll make a few suggestions here based on an upgrade in situ at W8 and not a pure install _ a clean installation being a total erase of the disk to install W8, rather then by installing W8 while there is W7 disk.

  Go to programs and features and uninstall your software Cyberlink you Cam.

  Download CCleaner and run a registry cleaner as many times as necessary until it finds nothing and reboot.

  Run again and if it still finds things, repeat the process until it finds nothing.

  http://www.filehippo.com/download_ccleaner/

  Do not use any other registry cleaner.

  Install your YouCam software and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104747-1&CC=US&DLC=en&LC=en&os=4063&Product=5076816&sw_lang=

  Save the file on the desktop and install it from there, not in a temporary folder.

  Restart once it's done.

  If this doean can't work, try to do a clean install, assuming that it was an upgrade.

  If you need a web cam to malfunction, return to W7.

  Did you create your recovery media or the recovery still on the hard drive partition and it is healthy?

  Another thing to try is to upgrade the BIOS, if you did not. However, there is nothing in the updates which improves the functionality of the web cam in W8.

  If you do not want to update the BIOS, post again for the detailed instructions, it do not try your self.

• Webcam HD 5000 does not work XP 64 BIT SP2

  LifeCam HD-5000 not FONCTIONNERA NOT WITH XP 64 - BIT SP2 HOW can I FIX this SOFTWARE don't SE CHARGE NO WHY

  Hello.

  According to this site:

  http://Logitech-no-EMEA.custhelp.com/app/answers/detail/A_ID/3428/section/Troubleshoot/CRID/405/lt_product_id/243/tabs/1, 3, 2, 5/cl/en

  Looking for webcam Logitech Quickcam 11.

  Because you are using the 64-bit operating system, you need the software for it, QuickCam 10.5 x 64

  Here's the shortcut for the program:

  http://www.Logitech.com/pub/techsupport/QuickCam/qc1051enu_x64.exe

  ;

• Webcam from Sony does not

  With Vista, it worked after renaming a folder relative to a control of the camera bluetooth. I remember not out and I can't find a recommendation for Windows 7. I guess it should work by doing the same thing that worked with Vista.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• 2000 webcam HP laptop does not

  I recently bought a laptop HP 2000 and he had the cyberlink youcam 3 on this subject. now the youcam software is no where on my computer. How can I get that back on my computer without having to "buy"?

  Hello

  Here is the softwareyou need for the webcam. Now, it's for Win7, if you need Win8 please follow this link.

  I would like to know if this software works for you.

  THX

• Webcam VX-700 does not connect on the Yahoo chat

  The Microsoft VX - 700 webcam works fine on MSN chat, but refuses to work on Yahoo. Is there anyway I can get this stuff to work on both when I use either of these chat clients?
  I tend to use both while also but don't really want two cams.

  Hello AlanGandalf,

  Thank you for visiting the Microsoft answers community.

  Have you tried to install the software from the Microsoft site?

  Try to uninstall the camera then reinstalling with the software that you can download here

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.