WebDownloadProgressEvent not be shipped after upgrade OS 2.0.1

Similar Questions

• Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1)

  Mac Book (end 2008) not dΘmarre after upgrading to El Capitan 2016 (1511.3.1) in order to prepare for Sierra

  I tried safe mode > disk utility, which took a lot of time and the disc seems to be OK.

  Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them.

  -What do you mean by? "Extensions have nucleuses, almost all these .kext, but I'm not able to get rid of them."?

  Did you delete anything?

  -The Mac can't you start mode (boot with the SHIFT key) safe?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• could not activate iPad2 after upgrade to iOS 9.3

  could not activate iPad2 after upgrade to iOS 9.3

  What error do you get?

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• K3 Note Wifi problem after upgrade to the marshmallow

  Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
  If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solution

  Note from the admin; phone added to the subject type

  
  

• BlackBerry Smartphones has not received SMS after upgrade to OS6

  Hi, I wish someone could help me on this point, since I called CELCOM several times already, but the problem still there.

  3 days ago I just upgraded my 9700 to OS6. Before the upgrade, for SMS, I was 3rd party to use applications: CRUNCHsms, after upgrade, believe that I received a few SMS from notification to my BB screen he showed. But I can't open the sms because it says there that CRUNCHsms cannot operate in OS6. So, I just removed the apps.

  The problem here, it's my phone can not always received any SMS even after I removed the CRUNCHsms apps. I tried texting on my own number of testing and a few of my friends and what happen is, my friend may receive the sms me, but my phone can't receive SMS. I tried to remove the SIM card and put it on another phone, and it can work normally without problem with send-receive sms.

  -I can't receive text messages, but I can send sms, after that I update my bold 9700 to OS6.

  I really wish that someone can help me solve this problem, it's been 3 days I can't receive SMS.

  Thank you

  Hello

  Have you checked your security settings? Crunch SMS automatically on your firewall to ensure it delivers SMS messages, good sense.

  Go to Options > Security > firewall and disable it, also make sure there is no tick next to text messages, PIN etc...

  Then remove your battery and it should solve your problem

  Hope this helps

• HP940c does not web print after upgrading to Windows 7

  recently unclassified HP Pavilion 9500 from Vista Home Premium to Windows 7 Home Premium. After upgrade, can no longer print to Web sites - using IE 11.0. Before the upgrade was using IE 9.0. Tried to print from multiple sites by using the function "Print" in the "Tools" button Was able to copy information Word doc Web site and print it from there. All ideasas to problem?

  Hi twf42,

  Thank you for being an active member of the HP support forums.  I understand that you have an impression of Internet Explorer 11 problem on your Windows 7 computer.

  I have included a link in Microsoft Internet Explorer required 11.  Microsoft says IE 11 runs only on computers running Windows 8.1 or Windows RT 8.1.

  Microsoft Internet Explore 11 system requirements

• Can not download emails after upgrade 31.4

  Environment:
  Windows XP SP3
  Windows Firewall
  Free AVG AV
  Verizon FIOS
  I use TB on this system with the same ISP for years.

  I have an account I just check every 2 weeks or more. TB launched today to check mail and got the update notice. SO I said OK and did the upgrade to 31.4. During the upgrade, it warned that there are additional AVG. I hit "checf for the module", and he sent back a message that none are available. I said OK, go on without her.

  I restarted TB after the upgrade - and no message is downloaded. I get no error - I just get no message. I am connected to the host of webmail, validate my creds account and verified that there are approximately 130 pending messages. (Typical).

  I can send messages - but cannot receive any.

  I rebooted - no change. I have validated that the incoming mail server name, port, and encryption are are correct. (They have not changed over the years).

  I've never had an entry of WF for TB - added one, it made no difference.

  Google the condition, found a couple of hits where people reported a similar situation, with a resolution of "problem disappeared himself. So far, which didn't happen for me!

  Launched error console - nothing that seems relevant is displayed.
  Only one mistake: Please do not load stuff into the browser se directly
  Warnings:
  (1) Timestamp: 19/01/2015 15:27:49
  WARNING: the Prototype of an object of the mutation causes your code to run very slowly. rather than create the object with the correct initial Prototype value using the Object.create
  Source file: resource://gre/components/steelApplication.js
  Online: 783
  There are also five assorted warnings "unknown-declaration of property has dropped.

  When I type 'check mail', I get the message in the lower left corner it to connect to verizon pop.verizon.netand progress display in the lower right "progresses" for about 10 seconds. Then the message disappears. No error, no mail received, either.

  I'm at a loss for what to do next...

  https://support.Mozilla.org/en-us/KB/problems-sending-and-receiving-messages

• not functional iMac after upgrading to El Capitan

  Upgrade iMac to El Capitan (I can't check now the details of the iMac, but it must be around 2011/2012). It does not start, but if you want to do anything, you get a beach ball. If you have the chance after > 1 hr, (opening app, doc etc.) action will occur. I did do repair with utility disk from disk, but that does not solve the problem.

  I have noticed that in the disk utility that all data storage was the 'other' and nothing is under 'apps' etc..

  How can I fix it?

  Thank you.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

• Satego X 200 21U: drive HARD internal not external usable after upgrade

  First, I changed the system to a 500 GB HARD drive, and everything was good. The old drive was not usable extern, so I left it as an emergency backup device.
  After a few weeks, I did the upgrade even to the second HARD drive, and again the old drive is not usable in my extern Dockingstation.
  Does anyone have a good idea what causes this problem? The HARD drives are locking the entire system, if I try to access and some formatting.

  Hello

  What do you mean by is not usable in my external docking station?

  I assume that you have placed the 2.5 HARD disk in a USB enclosure that allows to connect the HARD drive to the computer USB port.
  Is this good? So what harm s? Is not recognized USB HARD drive or what?
  Have you tried to connect different computers HARD drive?
  Otherwise, to do this

  But if the HARD drive is not accessible, using the case of USB, or use inside the laptop, then I would say it is a HARD drive malfunction

  Why this is happening?
  The writing and the reading drive HARD is a physical process which underline the material parts such parts can still die

• apex_ldap. Do not authenticate authenticate after upgradation to APEX5

  Hello

  We just upgraded 4.2 to 5 APEX APEX in the development environment. below the procedure was working before upgradation and works still in Production.

  is there script grant us must set up.

  Start

  If apex_ldap.authenticate)

  p_username = > "Mohammed Rehan,"

  p_password = > ' *',

  p_search_base = > 'OU = IT DEPT, DC = SaudiOrix, DC = ground'.

  p_host = > ' *',

  p_port = > 389,

  p_use_ssl = > ' only)

  then

  sys.dbms_output.put_line ('Authenticated');

  on the other

  sys.dbms_output.put_line ("authentication failed");

  end if;

  end;

  Hi brainbus80,

  brainbus80 wrote:

  Can you help me please in this issue?

  The above given code works well in the APEX 5.0. Here's the example I created for our internal LDAP server and tested on APEX 5.0:

  BEGIN
  
    IF APEX_LDAP.AUTHENTICATE (
          p_username    => 'kiran.pawar',
          p_password    => '*********',
          p_search_base  => 'ou=USERS,dc=vyomlabs,dc=com',
          p_host        => '*********',
          p_port        => 389,
          p_use_ssl      => 'N' ) THEN
      -- authenticated user
      DBMS_OUTPUT.PUT_LINE('AUTHENTICATED');
      --RETURN TRUE;
    ELSE
      -- unauthenticated user
      DBMS_OUTPUT.PUT_LINE('UNAUTHENTICATED');
      --RETURN FALSE;
    END IF;
  
  END;
  

  If authentication LDAP APEX construction or using APEX_LDAP does not work for your question, I suggest that you build your custom authentication based on the DBMS_LDAP package.

  After the discussions may also help you:

  • Help with authentication (APEX_LDAP. AUTHENTICATE)
  • https://Oracle-base.com/articles/Misc/Oracle-Application-Express-Apex-LDAP-authentication

  I hope this helps!

  Kind regards

  Kiran

• HTP.p does not like usual after upgrade to the apex 4.2.6

  Hello everyone,

  We have recently upgraded the Apex 4.0.2 on Oracle 11 g using Embedded PLS door of entry to the Apex 4.2.6 on Oracle 11 g using ADR.

  The initial series of unit tests seemed well until a few questions supported around "htp.p".

  The scenario is like this:

  1. the user fills some fields on the page-10 and click the Save"" button.

  2. This button then performs a redirection to a pop up page where some inputs more are invited to enter.

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend (as after presenting processes).

  II. another PLSQL block is executed, which closes the popup windows and returns the control to the parent page.

  This is achieved using htp.p...

  For example:

  HTP.p ("< body > '");

  HTP.p ("< script type =" text/javascript "> '");

  HTP.p ("var alertMsg =" &. P38_PO_AMOUNT has been paid";");)

  HTP.p ('javascript:Alert (alertMsg)');

  HTP.p ("window.opener.location.href =" f? p = & APP_ID.:7: & SESSION.) " ;") ;

  HTP.p('window.) Close (this);') ;

  HTP.p ("< /script >" ");

  HTP.p ("< /body >" ");

  The anonymous block under step 3.i. is well executed and done what it takes in the backend.

  Its the next step which is driving me crazy, I tried to add debugging but to no avail.

  The weird part is that the message "& P38_PO_AMOUNT. has been paid' getting appears on the pop-up itself instead of parent.

  Any ideas or pointers to this problem would be a great help. I have come to the forums and metalink for any position and had no luck so far.

  Kind regards

  Madhu.

  Hi Sunil,

  Thanks for the reply and apologize for the delay in responding.

  But 2 doubts which do not appear in your code:

  1. why you placetag through PTH again? Body will be already present on the page 7

  2. What is "this" in your window close event? 'this' will be indefinite in my opinion

  Thetag and the reference to 'this' was used because the application was developed first on Apex 3.x

  This piece worked through the upgrade to 4.0.2 and it starts to play up only after this upgrade (to 4.2.6).

  I had followed the suggestions from the link you posted, made some changes and the flow is as follows:

  1, as well as the original

  2 as well as the original

  3. when the user clicks "OK" on the popup:

  i. an anonymous PLSQL block is executed in the backend, under process, like submit it: after calculations & Validations.

  II. the 2nd block PLSQL for close & redirect the page is now part of 'Branch of PL/SQL procedure' with branch point ' on Submit: after the treatment (after calculation, Validation and treatment). The PLSQL code is as follows:

  BEGIN
    htp.p('');
  END;
  

  The behavior is always the same and seems not to have changed. I'm a little lost, try different options.

  I'll try to reproduce the scenario on apex.oracle.com and in the meantime of inputs/suggestions would be helpful.

  Kind regards

  Madhu.

• After the 8.0.1 upgrade Firefox will download but not install extensions after upgrade to 8.0.1

  Windows Vista. Avast Antivirus with Sandbox feature.
  Outdoor sandbox - all available extensions. In sandbox - not available extensions and not able to install all extensions. IE Adblock Plus, no. Script etc.
  Before you spend to 8.0.1 no problem in both modes. Add-ons - seem to be intact in both modes.
  When you try to install an extension after downloading:
  "the (extension) could not be installed because Firefox is unable to modify the required".
  Reluctant to delete the dat pluginreg all extensions that work out of Sandbox.

  Sorry for the confusion. Please see this and this. Looks like there issues on and off with the sandbox and Avast is up-to-date and working.

• Portege R30 does not SSD start after upgrade SSD and HDD

  Hello

  I have improved my Portege R30 - A to add a second SSD (Crucial M550) replace the optical with the new SSD drive with caddy.

  But now the system does not start automatically from the original SSD.

  I could press F12 while turning on my laptop and make it appear the start guide. Here I can see my original SSD and I can boot from it properly.

  In order to boot in the BIOS, I see only the HDD/SSD, USB, ODD memory... It doesn't gives me the possibility to choose between SSDS.

  In any case when I boot in this way than getting blue screens after awhile in win7.

  I tried to install a HARD drive as the second drive instead os SSD and her resut is the same.

  Is that what I can do to solve this, now I have to use the second drive as an external USB drive.

  Thank you

  Hello

  This ODD of SSD/HDD replacement is not always possible and in many cases, the BIOS will not handle and will not recognize the new HARD disk correctly.

  That I can remember some old laptops Toshiba Tecra and Portege that supported the functionality of Slim Select Bay were able to manage the 2nd HARD drive instead of driving WEIRD, but this was not possible due to the available selection slim Bay.

  In your case it looks like the laptop so that the BIOS does not support this function and, therefore, the additional SSD/HDD isn't recognised correctly.