WebLogic is not found JDBC connection created in IDE

Similar Questions

• VCSE-VCSC-TMSPE-AD, always get 404 not found for connection movi

  Hi, Experts.

  Location:

  VCS-control: X7.2.1

  VCS-Expressway: X7.2.1

  TMSPE: 13.2.1

  RE: Windows 2K 3

  By VPN, movi user can connect to VCS-C(which integrated with AD, so user authentication in AD), but without a VPN, by VCS - E, movi user cannot connect.

  VCS - E a static NAT to a public IP address with all the necessary ports open.

  VCS - E have minimum configuration to factory default as below:

  1. name, IP address, DNS, NTP

  2. create the SIP domain, enable SIP

  3. create VCS - c TraversalZone, and h.323 and SIP connection was estalished, shown as green indicator

  4. create the link bandwidth needed across all areas

  5. create a rule to search for courses, the target value for any alias traversalzone

  6 political authentication of all areas the value "do not check references" defaultZone, defaultsubzone, traversalzone

  See below for logging I capture VCS Expressway, she always get back with 404 not found error message:

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 448" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 448"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 401, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 449" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 401 Unauthorized

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK560062cbd420650fbdcd1423acc049d649; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34143 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 7ea25e18118002bd

  Server: TANDBERG/4120 (X7.2.1)

  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", stale = FALSE, algorithm = MD5, qop = "auth".

  Content-Length: 0

  |

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "INFO": Src - ip = "172.16.50.3" Src-port = "25000" detail = "receive the Request OPTIONS = method, Request-URI = sip: 172.16.5.10:7001; "transport = tls, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 452" Module ="network.sip" Level = "DEBUG": ip - Src = "172.16.50.3" Src-port "25000" = "

  SIPMSG:

  | Sip OPTIONS: 172.16.5.10:7001; transport = tls SIP/2.0

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  TO:

  Max-Forwards: 0

  User-Agent: TANDBERG/4120 (X7.2.1)

  Authorization: Digest nonce = "b1863670c75e193fed666bb5e0b381b7081bccfd4f029bc392157553d58d", realm = "TraversalZone", opaque = "AQAAAM/lI9sgrVIOAlyA49AKb1XNNSQG", algorithm = MD5, uri = "sip: 172.16.5.10:7001;" transport = tls", name of user ="exampleauth", response ="5424b23056e3408bb7c5057ca8921cba", qop is auth, cnonce ="32d6888de492c717c771f89e4b9931e3a4dd3090380a925b76349acf62b7", nc = 00000001

  Support: com.tandberg.vcs.resourceusage

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 453" Module ="network.http" Level = "DEBUG": Message = "Request" method = "POST", URL ="http://127.0.0.1:9998 / identification/name/exampleauth information" Ref = "0x460b500".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.http"Level ="DEBUG": Message = 'Response' Src - ip ="127.0.0.1"Src-port ="9998"Dst - ip ="127.0.0.1"Dst-port = '45146' response =" 200 OK "ResponseTime ="0.003486"Ref ="0x460b500 ".

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 456"Module =" network.ldap"Level ="INFO": detail =" credentials for authentication in identity directory: exampleauth.

  "2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22, 458"Module =" network.sip"Level ="INFO": Dst - ip ="172.16.50.3"Dst-port ="25000"detail =" send = 200, method = OPTIONS, To = sip response Code: 172.16.5.10:7001, [email protected]/ * / '.

  2012 11-28 T 17: 22:00 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22, 458" Module ="network.sip" Level = "DEBUG": Dst - ip = "172.16.50.3" = "25000" Dst-port "

  SIPMSG:

  | SIP/2.0 200 OK

  Via: SIP/2.0/TLS 172.16.50.3:5061; branch = z9hG4bK0543f31f3f612b0be1752d6785832d1a50; received = 172.16.50.3; rport = 25000

  Call ID: [email protected]/ * /.

  CSeq: 34144 OPTIONS

  Starting at: ; tag = 0c3b86c51458f605

  To: ; tag = 2f5366fe32e2f0ee

  Server: TANDBERG/4120 (X7.2.1)

  Support: com.tandberg.vcs.resourceusage, path, outbound, gruu

  Content-Type: text/xml

  Content-Length: 250

  25075025000|

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime =" 2012-11-28 09:22:02, 195"Module =" network.tcp "Level ="DEBUG": ip - Src ="101.85.21.125"Src-port ="51161"Dst - ip ="172.16.5.10"Dst-port ="5061"detail ="TCP connection ".

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 196" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" = "5061" detail = "TCP connection" Dst-port "

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 277"Module =" network.sip"Level ="INFO": Src - ip ="101.85.21.125"Src-port = detail"51161"=" receive the = SUBSCRIBE Request method, Request-URI = sip:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 277" Module ="network.sip" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port "51161" = "

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  Contact: <> [email protected]/ * /: 51161; transport = tls >

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (MCX 4.5.7.16762) - Mac OS X

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.5.7.16762;clientid="7B26CD64-18E7-5443-982A-DD2E496560D2";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  |

  "2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime ="2012-11-28 09:22:02, 282"Module =" network.sip"Level ="INFO": Dst - ip ="101.85.21.125"Dst-port ="51161"detail =" send = 404, method = SUBSCRIBE, To = sip response Code:[email protected] / * /, [email protected]/ * / '.

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 282" Module ="network.sip" Level = "DEBUG": Dst - ip = "101.85.21.125" Dst-port "51161" = "

  SIPMSG:

  | SIP/2.0 404 not found

  Via: SIP/2.0/TLS 192.168.1.3:51161; branch = z9hG4bKf60920d0f72bbac899bfab5b8e5e30c9.1; received = 101.85.21.125; rport = 51161; DefaultZone = ingress-box

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  From: <> [email protected] / * />; tag = c9331fde9f056be2

  To: <> [email protected] / * />; tag = 709c4dfeda5f3666

  Server: TANDBERG/4120 (X7.2.1)

  WARNING: 172.16.5.10:5061 399 'political response '.

  Content-Length: 0

  |

  2012 11-28 T 17: 22:02 + 08:00 vcse tvcs: elements UTCTime = "2012-11-28 09:22:02, 295" Module ="network.tcp" Level = "DEBUG": ip - Src = "101.85.21.125" Src-port = "51161" Dst - ip = "172.16.5.10" Dst-port = '5061' = "TCP connection is closed" detail "

  Hello

  you mention that the VCS-E is behind a static NAT. The VCS-E has the option of two Network Interfaces key installed, and if this is the case, do you have properly enabled and configured the static NAT configuration on the VCS itself, on the system > IP page in the web interface of VCS?

  This option key is required when you deploy the VCS E behind a NAT, you can find more information on this in Appendix 4 of the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

• Get an error "unable to locate component: this application has not start becauseATL100.DLL is not found" when connecting to internet

  * Original title: ATL100. DLL PROBLEM

  Please help me I am disabled and do not know much about computers. I just tried to connect to the Internet and there was a connection problem. The message came from mcagent.exe impossible to locate the component: this application has not start becauseATL100.DLL was not found. Reinstalling the application may fix this problem. I have no Internet and I don't know much about computers. I need my pc to take care of me, it's my connection to the world. Please help me. I also continues to receive a message from McAfee that my computer is in danger (real-time scanning is disabled)

  Delete all McAfee software! Then it will not work! Then reinstall the McAfee software. I had exactly the same problem: during the process of removement, I have immediate internet access... Good luck!

• Calibri is not found - so no created pdf file... help

  %% [ProductName: Distiller] %.

  Not found Calibri, using Courier.

  %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss

  %% [Flushing: rest of job (end of file) will be ignored] %%.

  %% [Warning: PostScript error.] No PDF file produced. ] %%

  Print from Microsoft Excel and get the error message above - and no pdf!

  I found this 'cute pdf writer' works very well.

  Never mind...

• Re: Satellite Pro A40 - has not found any connection WLAN in range

  I have problem with my laptop. I have Toshiba Satellite Pro A40 [model N°-PSA45E-001YMFS] with Microsoft Windows XP SP3 and I wanted to add a WiFi atheros (atheros 5005g) ar58mb5 map and an having problem.
  I have instaled lastes drivers for it. I see in drevice Manager and seems to work fine but when I try to look for other wirless shows that this text "found no wireless networks in range.

  First question: this model of laptop is possible to have this part?
  Second: Will it work?

  Sorry for my possible mistakes with this post but my English isn't correctly. Plese give me a quick answer for her.

  null

  Hey,.

  As far as I know a few Satellite Pro A40 were available with WLAN connectivity and other models not so theoretically WLAN works with Satellite Pro A40.

  You have installed the card WLAN, you connect the two antenna WLAN (black and white) cables to the WLAN card?
  Or you didn t these antenna cables?

• Not found wireless connection

  I have a problem with a laptop that I use with a WIFI network. Sometimes, the connection is lost because of certain areas without signal and the computer don't get re - not connecting after reaching an area covered without rebooting. How can I solve this problem because it should reconnect automatically as long as it is an area with a good WIFI coverage?

  Hello Adi,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the wireless connection. We will certainly help you with the same.

  You can try to follow the following suggestions to solve the problem with the connection to the wireless network.

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Manage wireless network profiles

  http://Windows.Microsoft.com/en-in/Windows-8/manage-wireless-network-profiles

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• printer is not found when connected to the router with the ethernet cable

  My c6280 used to print wireless (not a wireless printer) because I had hooked to the router.  Now, it won't work - I'm on Mac OSX Lion.  I tried to delete the printer and reinstall.

  Hello

  Please make sure to remove the software completely, because there is no plans for Lion.

  While the printer is connected to your network,

  Go into System Preferences > print & scan and click on the sign more.

  Select your printer and the driver will download automatically the Apple software update.

  For more information, you can follow the document below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails to install Apple servers, download and install the package of the latest version of the HP to Spple printer software:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  After completing the installation, add your printer as explained previously.

• An error has occurred - no valid device not found on which create newfilesystems

  Hi all

  I'm under VMware fusion 2.0.2 on Mac OS X V10.5 Leopard. Earlier, I installed 2.5.5 ESX Server in my VMfusion without error. Yesterday I try to install ESX 3.5 server and I changed the file vmx as shown below to set up the VT processor.

  ethernet0. Present = 'TRUE '.

  ethernet0. AddressType = 'generated '.

  For Cpu Intel VT

  monitor_control.restrict_backdoor = TRUE

  monitor_control.vt32 = TRUE

  After that I started installation with graphics by clicking on the next button while encouraging the next license agreement button to come following error messages

  «Is an error occurred - no valid devices were found on which to create nefilesystems.» Please check your hardware for the cause of this problem'and restart the machine... '. I check the configuration of the hard disk it caught as

  SCSI0:4.present = 'TRUE '.

  SCSI0:4.DeviceType = "scsi-disk" hard

  SCSI0:4.filename = "ESX3.5_Test.vmdk".

  the same change vmx, I did it in VMware workstation 6.5 on the version of Windows XP and ESX 3.5 installed successfully without errors works perfectly. Can you help me get this problem is resolved. Give me your valuable suggestions...

  Thanks in advance.

  Take a look on: HOWTO: run ESXi in Fusion

• NIMax.exe - Entry Point not found - attempt to create the task in MAX

  I have two different cards using NOR-DAQmx: PXI-4461 and PXI-6259. They are installed in a PXI-1031 chassis with a PXI-8105 controller. Both devices pass their self-test in MAX. When I try to create a new task for either, I get first the expected selection dialog box:

  

  Once I selected "Analog Voltage" (or anything else), I get the following error:

  

  Last week I upgraded my to a PXI-6562 HSDIO driver, who led me to update NOR-DAQmx to 9.2.3 and repair the two installations of Windows to get their work (see this forum thread).

  Creating task used to work. The system always recognizes one of the tasks I created there are weeks for the PXI-4461.

  Here's a screenshot of my current versions of software:

  

  Does anyone know how to fix this?

  I solved this problem by downloading and installing the driver OR DAQmx 9.3.0. This, in turn, has caused the problem of the post I linked above, which I fixed it by choosing 'fix' in the control panel to 1. the HSDIO driver, then 2. the NOR-DAQmx driver. The order of the questions. Now, it seems to work.

• I have not found multisim connectivity toolkit in connectivity function palette.

  I installed 'ni LABVIEW toolkit of multisim connectivity powered by beta', and then also I find in range of function of connectivity. I read above facts in the tutorial that is downloaded from the Web site of nor. The tutorial is attached.

  Looking forward for your reply.

  Thanking you

  Best regards

  Avinash

  It is possible that the installation is successful, but you are unable to locate the function Palette API, OR there could be something wrong with the actual installation.

  Well good to check if the Connectivity API Multisim are present:

  -> To open a new black VI LabVIEW > navigate to the diagram and open the Palette of functions.

  -> now press "space + Ctrl".

  -> search for say "Multisim Connect.vi.

  If the result of the research shows this VI so you can see exactly where its located on the hard disk (from dialog box properties of the VI) and location can also likely in the range of functions can be determined.

  There is another possibility that any 'connectivity' palette is set as invisible. Even in this case, you should be able to search APIs Multisim help above the method.

  

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• An error occored while reconnecting to Z: at \\BRENLEEBOLIN\Public. Microsoft Windows network: the network path was not found. This connection has not been restored,

  A can not access my respect (z), on my Microsoft Windows network, the network path is not found, the connection has not been restored.

  The PC called BrenLeeBolin is actually shot?  It is physically on the network?  Can you go to the BrenLeeBolin PC and see if the Z:\ drive is actually still there and readable / write?

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• "Network not found" when installing software, but I'm already on the internet!

  I have problems installing the software. Downloads fine, connection to the Internet is wonderful, but when I try to install anything, I get these messages - "network not found. Connect to the internet and try installation again. ' or 'no internet connection. "Connect to the internet, and then restart the installation. I have tried everything I know reset IE8, uninstall programs that I tried to install, checked and rechecked my connection (have an excellent connection every time I get this message). I tried to access my Windows Installer Clean Up, but it acts like it's the download then stops. I thought I had installed earlier, but now it seems to need to be installed as well. I don't know what to try. Would it have happened when I uninstalled Microsoft Office?

  PLEASE, PLEASE HELP!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Vim object reference not found

  Hello

  I'm trying to convert VCD vApps vm to vCenter vm workflow orchestrator of trough with the following code, when I try to run the function getVMVimRef() (on a virtual machine) it throws error "object reference not found Vim.

  Any ideas as to what could cause a VM to do not have a Vim reference?

  My workflow code is in the list below

  var vcVms = new Array();

  System.log (' VM passed: "+ vms.length");

  for (var i in SMV) {}

  moref var is vms [i] .getVMVimRef () .moRef;.

  "var XPath =" xpath:id = "" + moref + "'";

  var VMs is VcPlugin.getAllVirtualMachines (null, XPath);.

  var vm = VMs [0];

  vmName var = vm.name;

  vcVms [i] = vm;

  }

  -APR

  Check your plugin configuration. It is likely that you are not connected to the Organization of the system.

  This is required for access to the getVMVimRef() method.

  Christophe.