What effect is applied (temporarily) when the text is selected on an image?

Similar Questions

• Text effect disappears as soon as the text is right

  Does anyone have a solution for the problem?

  Hello

  Effects like shadow etc. apply to text rasterizes only, text rotation image rasterized the text and where you can see the effect. Back to 0 degrees rotation converts text not pixelated again, and therefore the shadow disappears. If you want the effect to stay even when the text block is not turned at all (0 degrees), you can use a system font, and you will see the same effect when the text block is not turned. This is because the system fonts are still pixelated on the edition.

  Rasterization is the process of converting text in image on the publication, etc.

  I hope this helps.

  See you soon

  Parikshit

• In indesign when the text is converted to be vectorised text, underlined text effect is not preserved

  In indesign when the text is converted to be vectorised text, underlined text effect is not preserved

  Adobe recommends strongly against systematically vectorised text conversion as being an unwise practice, destroyer of workflow, there is a very simple correction in Acrobat DC Pro control upstream that makes these conversions in one step.

  -Dov

• PDF forms have problems displaying text and only appears when the field is selected

  Hello

  I created pdf forms to be distributed to the clients of the company. But we have some people complain about the visibility of the text. When they work as a team, the pdf they receive from a third party often appears limes or no text, the text is only visible when the field is selected. I need to find a solution for this, because our company's products are based on this form.

  If there is any information addition that I must add to understand what is happening and how to fix it, I'll be happy to write it.

  In society, we all have mac and forms where innitially created in Adobe acrobat 9 pro, but we now have Adobe acropabt pro XI.

  Users of Mac and Windows systems.

  Thank you

  This is usually caused by the form is filled out and saved by a Mac user who uses the preview application to view the PDF file. More information is here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

  It's a good idea to inform your users that Adobe Reader (or Acrobat) should be used to work with Forms.

• What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  If it lights why if someone buy it?

• How to make a LabelField align right when the text is long?

  In order to make a good LabelField aligned, I create the LabelField with style "FIELD_RIGHT and add it to a value for money, it works when the text can be displayed on a single line." But when the text is long, over a single line, it works well.

  For example, if the text is "ABDEL FARZAD", appears like this:

  

  It looks like aligned left

  How can I get it?

  .

  No guarantee, but instead of Field.RIGHT, try

  FIELD. USE_ALL_WIDTH | DrawStyle.RIGHT

• Apply templates to the text

  In Photoshop CC, how can I create a pattern and use it with text.  I found the model to define, but I don't know where to find them and apply them to the text that is in a layer separated.

  Thank you!

  

  1. draw the patten. in this example, a 8 px x px 8 L was created on a Transparent background using the Rectangle tool. (Fig 1)

  2 edit > Define pattern (Fig 2)

  3. open a new file and type a word (Fig 3)

  4. Add a blank layer. Then edit > fill choose: model > custom template. It will be the last in the series that is presented. (Fig 4)

  5. layer > create Clipping Mask (Fig 5)

• The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. The text even unincorporated font that is formatted as text (not scanned) become stupid

  The present no embedded fonts in scanned documents containing plain text are not get converted fonts incorporated after OCR applied. But the texts are searchable. Even fonts not embedded text that is formatted as text (not digital) are themselves converted to fonts embedded by adobe distiller.

  Fix. Expected behavior.

  Output of the OCR is not incorporated. With Acrobat Pro, a preflight check is available to embed the fonts.

  On the use of Distiller - using a work option distill configured appropriately that the PDF created from the authoring application (FrameMaker, InDesign, MS Word, etc.) will have embedded fonts.

  Be well...

• How to get the text to change with each image in the slideshow base

  Hi, I'm putting the different positions and text on three different images. When I saw the text just remains the same.  I tried to change individually, but it doesn't seem to work. I took images in Photoshop and make all the same size with compensation for the text to be included later in the Muse. Then I loaded the three images in the slide show and thumbnail to bring the image before and at the Center. But regardless I the title and text appear unchanged, even if the changes to the image.  I don't know what to do with the image and text together in Photoshop would do anything for type resolution when it was introduced to the Muse.  Any ideas please.  I enclose the schema where I wish to address three different types of job seeker.

  Hi brush them... you have checked the title text on your widget option?... Try again with different slidshows which shows the option.so of text you can add the text you want in each image/trigger...sorry my English and I hope to help you

• Windows media player closes when the music is selected.

  Windows media player closes when the music is selected. I see I'm not the only one with this problem HELP!

  It is indeed an event corresponding to a WMP crash thanks :) The details of the accident, the accident is caused by a damaged DRM system. I suggest that reset you the DRM system, following the instructions in the

  http://support.Microsoft.com/kb/929642

  (the article mentions the Zune software, but can be applied in more general cases too).

• Table header row gets cut off from view when the text block is resized

  I'm designing a table that has a header row, 6 body rows and 5 columns. I want the header skewed to 20º and rotation type of needles from the same angle. Knows someone who worked with tables, it is not possible to rotate the text to this value via the parameters of the cell, but the job is to split the table into two blocks of text. The lower sash will be the body lines, but the Executive must have the header where it gets skewed to the specified angle. The text must be created in separate and then cut and paste frames in each column header and then it can be rotated.

  The problem I have is when I try to drag the bottom of the text block to the top while the header remains visible, the header gets cropped view. The only way to prevent it from is Cup is I leave the first line in the frame, but then it gets skewed is not what I want. It seems that the block of text ignores the header still exists. The screenshot below has two tables. The top version is the one that I want to apply the effect to. The bottom has the effect, but his top line is a line of body (not a header).

  

  I don't think that it is possible to have a heading row without at least a body line in the framework...

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• Improve the thin line apply to all the text in my PDF

  So I'm just learning the cause of my fonts bold when show my CV in Adobe Reader was the thin line improve "characteristic". But anyway, I read are just a few bold letters, my document as a whole is to be bold! When I turn off the thin line it seems to improve as it should, but if someone only has not this function or views in a good web browser see "BOLD" lines, how the hell do I fix this? I tried several things like change the font and by increasing the size of the characters, but no matter what it still applies it the player application both in web browsers, no matter if its an installed font or Times New Roman it still happens.

  Please any help?

  Improvement on

  

  Fine lines off

  

  Maybe you have inadvertently applied a stroke to your text in InDesign. If the race has any color, InDesign will give a preview of the text even if the width of the line is set to zero.

  To test a sample, select any word in bold with the text tool, open the swatches Panel and check that it has any color applied to the race. If there is, it changes to zero.

• BlackBerry Z10 Z10 not advising me when the texts/emails/etc. arrive in the hub

  My Z10 using the 10.1.0.4181 software, model STL100-2.

  Since Friday I stopped to receive notifications when a text, email or FB update arrives in the hub, and the LED is not blinking either. The only way can I getmy hub update is by restarting the phone, which is obviously something that's very boring and not something that I can get all few minutes do as I have work to do, but I missed now three texts important members of the family today, more that I am waiting for an important and urgent email regarding my mortgage which I can't afford delay respondent.

  Anyone know what's going on and how can I fix?

  Please check:

  http://forums.CrackBerry.com/BlackBerry-Z10-F254/hub-notification-issue-i-think-i-solved-myself-8532...

• Move to the beginning or end of line when the text selection

  Go to the beginning or end of line when you select type. On the extended keyboard, END selects all text in the pain of inserting at the end including hidden at the end of the text box type, what is the command on the new keyboards wireless, shorter?

  I'm sorry. I blew it. He has not left arrow. It is the arrow to the right.

  FN + shift + right arrow	= Select and highlight the text between the Point of Insertion at the end of the line.
  Command + shift + down arrow	= Select and highlight the text from the insertion point to the end of the paragraph
  Command + shift + right arrow	= Select and highlight the text between the Point of Insertion at the end of a Word
  Shift + down arrow	= Select and highlight the text between the Point of Insertion to the next line of text where the	Insertion point has been inserted in the previous line of text (confused sounds)

  Fn + right arrow	= Moves the cursor to the Point of Insertion the end without highlight texts
  Cmd + down arrow	= Moves the cursor to the Point of Insertion until the beginning of the next paragraph
  FN + command + right arrow	= Moves the cursor to the Point of Insertion at the end of the story.